面向新质作战装备的试验指挥控制体系结构开发

军事技术和武器装备的创新发展,使以新质作战武器装备为代表的新型作战力量脱颖而出.试验指挥控制体系结构的核心要素与描述模型,明确了体系结构开发的新质作战装备更加强调体系作战与联合试验场景,介绍了面向新质作战装备的模型顺序,并以激光武器为例说明了体系结构的构建过程.     

基于空间平滑的单次快拍DOA估计方法

针对DOA估计的实时性和数据污染影响,给出了一种基于空间平滑的单次快拍DOA估计算法.由空间平滑技术,对接收的单次快拍数据采取解相干,再对Toeplitz矩阵进行协方差处理、采用特征分解、MUSIC算法和ESPRIT算法对信号实现DOA估计.该算法只需单次快拍,大大地减少了计算量,并且比现有的算法估计性能更好.采用计算机实验模拟分析和验证,证实了其有效性.     

结合自适应时间权重的改进STRCF目标跟踪

针对STRCF算法时间权重因子固定,且常因长时遮挡等原因造成跟踪漂移的问题,提出了一种自适应时间权重学习的目标跟踪算法.利用峰值旁瓣比在线动态更新时间权重因子以提升跟踪器的准确性.在跟踪器中嵌入遮挡判断模块,设定条件判断是否发生遮挡,以决定是否停止对目标位置的更新.实验结果表明:该算法的精确度与成功率分别为0.880和0.814,相比STRCF算法分别提升了2.6％和2.0％,且跟踪速度达到28.61帧/s,在CPU上可以达到实时.     

Preparation and characterization of HMX/EVA/hBNNSs micro-composites with improved thermal stability and reduced sensitivity

Hexagonal boron nitride nanosheets(HBNNSs)have huge potential in the field of coating materials owing to their remarkable chemical stability,mechanical strength and thermal conductivity.Thin-layer hBNNSs were obtained by a liquid-phase exfoliation of h-BN powders and incorporated into EVA coatings for improving the safety performance of 1,3,5,7-tetranitro-1,3,5,7-tetrazocane(HMX).HBNNSs and ethylene-vinyl acetate copolymer(EVA)were introduced to HMX by a solvent-slurry process.For com-parison,the HMX/EVA and HMX/EVA/graphene(HMX/EVA/G)composites were also prepared by a similar process.The morphology,crystal form,surface element distribution,thermal decomposition property and impact sensitivity of HMX/EVA/hBNNSs composites were contrastively investigated.Results showed that as prepared HMX/EVA/hBNNSs composites were well coated with hBNNSs and EVA,and exhibited better thermal stability and lower impact sensitivity than that of HMX/EVA and HMX/EVA/G composites,suggesting superior performance of desensitization of hBNNSs in explosives.     

Survivability assessment of spacecraft impacted by orbit debris

To help optimize the spacecraft design and reduce the risk of spacecraft mission failure, a new approach to assess the survivability of spacecraft in orbit is presented here, including the following three steps:1) Sensitivity Analysis of spacecraft. A new sensitivity analysis method, a ray method based on virtual outer wall, is presented here. Using rays to simulate the debris cloud can effectively address the component shadowing issues. 2) Component Vulnerability analysis of spacecraft. A function"Component functional reduction degree — Component physical damage degree"is provided here to clearly describe the component functional reduction. 3) System-level Survivability Assessment of spacecraft. A new method based on expert knowledge reasoning, instead of traditional artificial failure tree method, is presented here to greatly improve the efficiency and accuracy of calculation.     

An experiment evaluating how the tiny mass eccentricities in spin-stabilized projectiles affect the position of impact points

This study investigates and quantifies some possible sources affecting the position of impact points of small caliber spin-stabilized projectiles (such as 12.7 mm bullets). A comparative experiment utilizing the control variable method was designed to figure out the influence of tiny eccentric centroids on the projectiles. The study critically analyzes data obtained from characteristic parameter measurements and precision trials. It also combines Sobol's algorithm with an artificial intelligence algorithm—Adaptive Neuro-Fuzzy Inference Systems (ANFIS)—in order to conduct global sensitivity analysis and determine which parameters were most influential. The results indicate that the impact points of projectiles with an entry angle of 0° deflected to the left to that of projectiles with an entry angle of 90°. The difference of the mean coordinates of impact points was about 12.61 cm at a target range of 200 m. Variance analysis indicated that the entry angle — i.e. the initial position of mass eccentricity — had a notable influence. After global sensitivity analysis, the significance of the effect of mass eccentricity was confirmed again and the most influential factors were determined to be the axial moment and transverse moment of inertia (Izz Iyy), the mass of a projectile (m), the distance between nose and center of mass along the symmetry axis for a projectile (Lm), and the eccentric distance of the centroid (Lr). The results imply that the control scheme by means of modifying mass center (moving mass or mass eccentricity) is promising for designing small-caliber spin-stabilized projectiles.     

Insensitive energetic microspheres DAAF/RDX fabricated by facile molecular self-assembly

Insensitive energetic materials are promising in the defense weapons field. However, energetic materials still suffer from great challenges and the concern about their safety limits their utilization. In this work, insensitive energetic explosive 3,3′-diamino-4,4′-azoxyfurazan/hexahydro-1,3,5-trinitro-1,3,5-triazine (DAAF/RDX) microspheres were fabricated by self-assembly method. Rod-like DAAF/RDX was prepared by mechanical ball milling for comparison. DAAF/RDX composites with different mass ratios (90:10, 80:20, and 70:30) were obtained. The morphologies and structures of as-obtained DAAF/RDX composites were characterized by scanning electron microscopy (SEM), powder x-ray diffraction (PXRD) and fourier transform infrared spectroscopy (FT-IR). The results showed that DAAF/RDX microspheres exhibited regular shaped microspheres with sizes from 0.5 to 1.2 μm. There was no crystal transition during the modification process. The thermal properties of as-obtained materials were then evaluated by differential scanning calorimetry (DSC) and materials studio software. DAAF/RDX microspheres showed an advanced decomposition peak temperature compared with rod-like DAAF/RDX. The binding energy and peak temperature values at zero β_i (T_P0) of DAAF/RDX (90:10) increased by 36.77 kJ/mol, 1.6 °C, and 58.11 kJ/mol, 12.3 °C compared to DAAF/RDX (80:20) and DAAF/RDX (70:30), indicating the better thermal stability of DAAF/RDX (90:10). The characteristic drop height (H₅₀) of DAAF/RDX (higher than 100 cm) composites was higher than that of raw RDX (25 cm), suggesting significant improvements in mechanical safety. The preparation of DAAF/RDX microspheres is promising for the desensitization of RDX and useful for the formation of other materials and future wide applications.     

基于神经网络和遗传算法的威胁度估计算法

针对威胁度估计问题,提出了基于BP神经网络模型的算法,利用神经网络良好的自适应能力和遗传算法强大的全局搜索能力,通过样本数据训练,提高了威胁度估计的准确性和适应性。     

基于模糊综合评判的野战输油管线部队人员绩效评估

本文探讨了野战输油管线部队人员绩效评估的原则,构建了野战输油管线部队人员绩效评估的指标体系和模糊评判模型,并给出了对某野战输油管线大队人员进行绩效评估的实例。     

程序进化器

研究用模拟进化方法进行程序设计的途径。构造了以形式文法为遗传表示的程序进化器,提出了这个进化器使用的有关算法。本文用程序进化器解决了人工蚁问题。