Gas metal arc welding of high nitrogen stainless steel with Ar-N2-O2 ternary shielding gas

High nitrogen stainless steel with nitrogen content of 0.75％was welded by gas metal arc welding with Ar—N2-O2 ternary shielding gas. The effect of the ternary shielding gas on the retention and improvement of nitrogen content in the weld was identified. Surfacing test was conducted first to compare the ability of O2 and CO2 in prompting nitrogen dissolution. The nitrogen content of the surfacing metal with O2 is slightly higher than CO2. And then Ar—N2-O2 shielding gas was applied to weld high nitrogen stainless steel. After using N2-containing shielding gas, the nitrogen content of the weld was improved by 0.1 wt％. As N2 continued to increase, the increment of nitrogen content was not obvious, but the ferrite decreased from the top to the bottom. When the proportion of N2 reached 20％, a full austenitic weld was obtained and the tensile strength was improved by 8.7％. Combined with the results of surfacing test and welding test, it is concluded that the main effect of N2 is to inhibit the escape of nitrogen and suppress the ni-trogen diffusion from bottom to the top in the molten pool.     

A reusable planar triggered spark-gap switch batched-fabricated with PCB technology for medium-and low-voltage pulse power systems

Triggered spark-gap switch is a popular discharge switch for pulse power systems. Previous studies have focused on planarizing this switch using thin film techniques in order to meet the requirements of compact size in the systems. Such switches are one-shot due to electrodes being too thin to sufficiently resist spark-erosion. Additionally, these switches did not employ any structures in securing internal gas composition, resulting in inconsistent performance under harsh atmospheres. In this work, a novel planar triggered spark-gap switch (PTS) with a hermetically sealed cavity was batched-prepared with printed circuit board (PCB) technology, to achieve reusability with low cost. The proposed PTS was inspected by micro-computed tomography to ensure PCB techniques meet the requirements of machining precision. The results from electrical experiments demonstrated that PCB PTS were consistent and reusable with lifespan over 20 times. The calculated switch voltage and circuit current were consistent with those derived from real-world measurements. Finally, PCB PTS was used to introduce hexanitrostilbene (HNS) pellets in a pulse power system to verify its performance.     

Numerical and experimental study on the response characteristics of warhead in the fast cook-off process

The response characteristics of the warhead under thermal stimuli conditions are important to the safety improvement. The goal of this study is to obtain data on the warhead in the fast cook-off process. In this paper, a numerical calculation method is proposed, whose reliability is supported by comparison with experimental results. Through the numerical calculation, the temperature distribution, temperature change, and ignition time are acquired. The numerical results show that the ignition time is 76 s after the warhead started to burn and that the maximum temperature of the explosive's outer surface is 238.3 C at the ignition time. The fast cook-off experiment of the warhead is implemented so as to get the flame temperature and reaction grades that are not available through numerical calculation. The experimental results show that the overpressure fails to reach the preset minimum value which is equivalent to 6 kg of TNT and that the reaction grade is deflagration. The research results have reference value for the design of the warhead and the reduction of detonation risks.     

Hazard evaluation of ignition sensitivity and explosion severity for three typical MH2 (M＝Mg,Ti, Zr) of energetic materials

MgH2, TiH2, and ZrH2 are three typical metal hydrides that have been gradually applied to composite explosives and propellants as additives in recent years. To evaluate ignition sensitivity and explosion severity, the Hartmann device and spherical pressure vessel were used to test ignition energy and ex-plosion pressure, respectively. The results showed that the ignition sensitivity of ZrH2, TiH2 and MgH2 gradually increased. When the concentration of MgH2 is 83.0 g/m3 in Hartmann device, the ignition energy attained a minimum of 10.0 mJ. The explosion pressure of MgH2 were 1.44 times and 1.76 times that of TiH2 and ZrH2, respectively, and the explosion pressure rising rate were 3.97 times and 9.96 times that of TiH2 and ZrH2, respectively, through the spherical pressure vessel. It indicated that the reaction reactivity and reaction rate of MgH2 were higher than that of TiH2 and ZrH2. In addition, to conduct in-depth theoretical analysis of ignition sensitivity and explosion severity, gas production and combus-tion heat per unit mass of ZrH2, TiH2 and MgH2 were tested by mercury manometer and oxygen bomb calorimetry. The experimental results revealed that MgH2 had a relatively high gas production per unit mass (5.15 mL/g), while TiH2 and ZrH2 both had a gas production of less than 2.0 mL/g. Their thermal stability gradually increased, leading to a gradual increase in ignition energy. Furthermore, compared with theoretical combustion heat, the combustion ratio of MgH2, TiH2 and ZrH2 was more than 96.0%, with combustion heat value of 29.96, 20.94 and 12.22 MJ/kg, respectively, which was consistent with the explosion pressure and explosion severity test results.     

榴弹隐身涂层粘合强度分析

隐身榴弹在发射过程中,表面涂敷的RAM将承受较大的加速度过载,为了保证发射过程中RAM不脱落,要求RAM具有克服过载的粘着强度。分析了榴弹涂敷隐身材料的强度要求,根据要求设计粘合胶强度、RAM的厚度和密度等参数,并进行实验验证。     

《孙子兵法》治军思想的人本取向

《孙子兵法》揭示了军事领域的基本规律,对军事实践具有普遍的指导意义。《孙子兵法》中阐述的“令文齐武”、“修道保法”、“将帅五德”等治军理论至今给我们以深刻的启迪。其中“文”、“道”、“德”等治军范畴充满了以人为本的精神魅力,闪耀着千古不灭的思想光芒。     

基于直接数据域自适应算法的相干信号DOA估计

利用直接数据域自适应算法的稳态权值代替噪声子空间构建空间谱,构造了一种超分辨波达方向(DOA)估计方法.为了解决谱峰搜索时的伪峰问题,采用参考阵元轮换得到多组线性无关稳态权值,逼近噪声子空间,能有效去除伪峰.针对相干信号的DOA估计,进一步提出了直接数据域取对称共轭向量的解相干方法.相比子空间分解类算法,本文算法不需估计信号源数目和协方差矩阵、不需特征分解,复杂度仅为O(MP),同时能有效完成解相干处理.     

空心和Halbach永磁直线同步电机的牵引力和法向力分析

针对由空芯线圈和Halbach永磁结构组成的直线同步牵引电机,提出其牵引力和法向力的一种解析计算方法.首先从相同结构的旋转电机出发,推导得到其牵引力和法向力的解析计算公式;然后,将所得结果推广到直线电机结构,得到基于空芯线圈和Halbach永磁结构的直线同步电机牵引力和法向力的计算方法.所得解析解的有效性由有限元分析软件Ansoft Maxwell得到验证.此方法为基于空芯线圈和Halbach 永磁结构的直线同步电机的结构设计和性能分析提供了基础.     

A metaheuristic scheduling procedure for resource-constrained projects with cash flows

Resource-constrained project scheduling problems with cash flows (RCPSPCF) are complex, combinatorial optimization problems. Many heuristics have been reported in the literature that produce reasonable schedules in limited project environments. However, the lack of a heuristic that dominates under differing project conditions can lead to a suboptimal choice of an appropriate heuristic for scheduling any given project. This may result in poor schedules and monetary losses. This paper reports on the application of the tabu search metaheuristic procedure for the RCPSPCF. Strategies for neighborhood generation and candidate selection that exploit the special features of the problem are combined with a simple multiheuristic start procedure. Extensive experimentation, with multiple data sets and comparison with an upper bound, indicates a significant improvement, both in project Net Present Value (NPV) as well as the number of projects, where the metaheuristic outperforms the best known heuristics in the literature. More specifically, this procedure produces the best schedules in over 85% of the projects tested, in contrast to the best single-pass heuristics which have been shown to dominate in at most 20% of the same cases. This iterative, general purpose heuristic is able to adapt significantly better to the complex interactions of the many critical parameters of the RCPSPCF than single-pass heuristics that use more specific information about each project environment. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 912–927, 1999     

低地球轨道卫星网络节能方法

通常卫星的唯一能源来源是太阳能,因此星上网络设备的能源供应问题比地面网络的更加严峻。通过修改和扩展链路容量受限的最小代价多商品流模型来适应卫星网络这一特殊的体系结构,并基于低轨道卫星网络的多重覆盖机制和流量分布模型,改进现有的启发式算法来关闭冗余的卫星节点、星地链路和星间链路。在满足链路利用率和路由跳数增加比例约束的条件下,仿真实验中关闭上述三种参数的比例分别可达59%、61%和72%,卫星网络的总体节能比例可达65%。