分布式战术C~3I系统的体系结构和开发途径

前段简要地介绍了野战高炮、地空导弹防空情报指挥系统的硬、软件体系结构及其构成的方法;中段在简单阐述了集中式战术Ｃ３Ｉ系统的蔽端和分布式战术Ｃ３Ｉ系统的优点之后对集中式与分布式战术Ｃ３Ｉ系统作了全面的比较;第三段集中阐述构成分布式战术Ｃ３Ｉ系统尚存在的困难,在我国当前技术条件下,构建面向对象的初级分布式战术Ｃ３Ｉ系统是比较现实的途径,并给出了较多具体的方法。     

目标指示雷达导引炮瞄雷达捕获目标的精度分析

本文研究了情报指挥系统中目标指示雷达导引炮瞄雷达捕获目标的精度问题。结合工程实践分析了影响精度的诸误差因素,在此基础上,建立了目标指示雷达导引炮瞄雷达捕获目标成功率的计算公式,给出了计算结果,并进行了结果分析。     

多自治系统关联的级联失效模型建立和分析

为分析级联失效对互联网性能的影响,基于互联网由多自治系统关联的现实,模拟自治系统间的负载均衡,建立了多自治系统关联的级联失效模型。在此基础上定义了分别由强连接关系和弱连接关系组成的2种多自治系统关联网络,并分析了域间流量引起的级联失效对网络性能造成的影响。结果表明:存在引发级联失效的域间流量比例临界值;级联失效发生后,弱连接网络以吞吐量下降为主,强连接网络以负载增加为主。     

使用多Agent模型求解N－难题的新方法

借鉴多Ａｇｅｎｔ模型思想给出了求解Ｎ－难题的新方法。将Ｎ－难题分成多个Ａｇｅｎｔ,赋予每个Ａｇｅｎｔ以算法,利用Ａｇｅｎｔ之间的协作和交互有效地进行问题求解。该方法将前人的指数时空复杂度降为多项式时空复杂度,实际实现结果表明了该方法可行、高效。     

Investigate the effects of magnetic fields on the penetration ability of a shaped charge jet at different standoffs

The influence of a magnetic field on the stability of a shaped charge jet is experimentally investigated at standoffs of 490, 650 and 800 mm. The experimental results without and with the magnetic field are compared in terms of the shaped charge jet form, stability and penetration ability. A theoretical model based on one-dimension fluid dynamics is then developed to assess the depth of penetration of the shaped charge at those three standoffs and magnetic conditions. The results show that the penetration capability can be enhanced in more than 70% by the magnetic field. The theoretical calculations are compared with the experimental results with reasonably good correlation. In addition, the parameters introduced in the theory are discussed together with the experiments at three standoffs studied.     

An interface shear damage model of chromium coating/steel substrate under thermal erosion load

The Cr-plated coating inside a gun barrel can effectively improve the barrel's erosion resistance and thus increase the service life.However,due to the cyclic thermal load caused by high-temperature gun-powder,micro-element damage tends to occur within the Cr coating/steel substrate interface,leading to a gradual deterioration in macro-mechanical properties for the material in the related region.In order to mimic this cyclic thermal load and,thereby,study the thermal erosion behavior of the Cr coating on the barrel's inner wall,a laser emitter is utilized in the current study.With the help of in-situ tensile test and finite element simulation results,a shear stress distribution law of the Cr coating/steel substrate and a change law of the interface ultimate shear strength are identified.Studies have shown that the Cr coating/steel substrate interface's ultimate shear strength has a significant weakening effect due to increasing temperature.In this study,the interfacial ultimate shear strength decreases from 2.57 GPa(no erosion)to 1.02 GPa(laser power is 160 W).The data from this experiment is employed to establish a Cr coating/steel substrate interface shear damage model.And this model is used to predict the flaking process of Cr coating by finite element method.The simulation results show that the increase of coating crack spacing and coating thickness will increase the service life of gun barrel.     

Theoretical and numerical simulation study on jet formation and penetration of different liner structures driven by electromagnetic pressure

The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characteristics of electromagnetic loading and established a coupling model of"Electric—Magnetic—Force"and the theoretical model of jet formation under electromagnetic force. The jet formation and penetration of conical and trumpet liners have been calculated. Then, a numerical simulation of liner collapse under electromagnetic force, jet generation, and the stretching motion were performed using an ANSYS multiphysics processor. The calculated jet velocity, jet shape, and depth of penetration were consistent with the experimental results, with a relative error of less than 10％. In addition, we calculated the jet formation of different curvature trumpet liners driven by the same loading condition and ob-tained the influence rule of the curvature of the liner on jet formation. Results show that the theoretical model and the ANSYS multiphysics numerical method can effectively calculate the jet formation of liners driven by electromagnetic force, and in a certain range, the greater the curvature of the liner is, the greater the jet velocity is.     

柔性机械手加速度反馈抑制振动的机理与稳定性分析

在柔性机械手的控制中,末端加速度反馈是一种抑制振动有效而简便的途径。但直到现在对其中抑制振动和稳定性的机理并不很清楚。本文深入系统地分析了其内在原因,证明其反馈稳定性,并在自行建立的柔性手实验平台上完成了实验证明,得出了几个确定性有实际指导意义的结论     

新型弹簧钢 33SiMnB 的研制

本文报导了一种新研制的钢种33SiMnB,用这一碳含量远低于传统弹簧钢(如60Si_2Mn)的新弹簧钢33SiMnB制造的载重汽车板簧、铁路轨枕弹条等弹性制件,不但综合力学性能优于传统弹簧钢制成的相同制件,而且在冶金厂的钢材生产过程和机械厂的制簧生产过程中都显出成品率高、能耗率低等诸多优点。     

对称集及其在无线电信号频率设计中的应用

本文在完成对称集理论研究基础上,提出了运用对称集理论来解决无线电信号频率间相互干扰的新方法,从而可编制出简明实用的“不干扰表”,达到在狭小地域(航空毋舰)内有多路无线电信号频率(段)的正确选择。