完善舰船装备维修体制 提高预防性维修水平

分析了海军装备目前的维修现状以及存在的问题,论述了实行视情维修的重要性和必要性,提出了建立以视情维修为主的预防性维修大纲的原则．     

磁悬浮隔振系统的行为与分析

磁悬浮隔振是一种新型的主动式隔振技术。文中首先对磁悬浮隔振系统做一般性的说明,然后以自行研制的磁悬浮隔振试验装置为对象,分析了磁悬浮隔振的机理和特性;论述了磁悬浮隔振系统的建模和控制策略;最后对磁悬浮隔振系统运行与特性进行分析并给出了分析结果和仿真结果的比较。     

Minimizing makespan in a multimode multiprocessor shop scheduling problem

We study the problem of multimode scheduling tasks on dedicated processors, with the objective of minimizing the maximum completion time. Each task can be undertaken in one among a set of predefined alternative modes, where each mode specifies a required set of dedicated processors and a processing time. At any time each processor can be used by a single task at most. General precedence constraints exist among tasks, and task preemption is not allowed. The problem consists of assigning a mode and a starting time to each task, respecting processor and precedence constraints, to minimize the time required to complete all tasks. The problem is NP-hard in several particular cases. In previous works, we studied algorithms in which a solution was obtained by means of an iterative procedure that combines mode assignment and sequencing phases separately. In this paper, we present some new heuristics where the decision on the mode assignment is taken on the basis of a partial schedule. Then, for each task, the mode selection and the starting time are chosen simultaneously considering the current processor usage. Different lower bounds are derived from a mathematical formulation of the problem and from a graph representation of a particular relaxed version of the problem. Heuristic solutions and lower bounds are evaluated on randomly generated test problems. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 893–911, 1999     

时序驱动的详细布局方法

针对超大规模集成电路布局过程中时序优化问题,提出一种时序驱动的详细布局方法。对设计进行时序分析并获取时序违反路径集合,对路径上两个连续固定单元间的线网进行平滑处理,以减小路径曲折度以及减少线长。再针对每一个可移动单元与其相邻的线网建立二次规划时序模型,求解局部最优布局位置。对于给定的测试电路,实验结果表明,最差的时序违反与总的时序违反均有明显改善,采用ICCAD2015竞赛的测试模板和评价方法,总的时序性能有45~350 min的提升。     

非致命防暴动能弹作战效能评估

提出了非致命防暴动能弹作战效能的评估法,分析了非致命防暴动能弹的技术性能,建立了以非致命性为核心指标的防暴动能弹效能指标体系。采用定性分析与定量分析相结合,将集对分析法应用到了非致命防暴动能弹的效能评估中,对3种防暴动能弹进行了效能评估。为非致命防暴动能弹的研发生产提供了重要的理论支撑。     

Note: Remarks on theory of the core

This note proposes a necessary and sufficient condition for the existence of an undominated core and a necessary and sufficient condition for coincidence of the intersection core and the undominated core. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 455–458, 2000     

Bayesian enhanced decision making for deteriorating repairable systems with preventive maintenance

Since a system and its components usually deteriorate with age, preventive maintenance (PM) is often performed to restore or keep the function of a system in a good state. Furthermore, PM is capable of improving the health condition of the system and thus prolongs its effective age. There has been a vast amount of research to find optimal PM policies for deteriorating repairable systems. However, such decisions involve numerous uncertainties and the analyses are typically difficult to perform because of the scarcity of data. It is therefore important to make use of all information in an efficient way. In this article, a Bayesian decision model is developed to determine the optimal number of PM actions for systems which are maintained according to a periodic PM policy. A non‐homogeneous Poisson process with a power law failure intensity is used to describe the deteriorating behavior of the repairable system. It is assumed that the status of the system after a PM is somewhere between as good as new for a perfect repair and as good as old for a minimal repair, and for failures between two preventive maintenances, the system undergoes minimal repairs. Finally, a numerical example is given and the results of the proposed approach are discussed after performing sensitivity analysis. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

虚拟样机在火炮研制及评估中的应用研究

介绍仿真的重要性 ,对虚拟样机的优点进行了概述 ,讨论了火炮的拓扑结构和自由度 ,并建立了各体局部坐标系。首次将 ADAMS的应用引入到装备仿真领域 ,介绍了机械系统仿真分析平台 ADAMS及装备虚拟样机建立的步骤 ,结合Fortran语言编程在 ADAMS环境下建立了装备虚拟样机 ,算例仿真结果证明了武器装备模型及其虚拟样机建立的正确性。基于虚拟样机仿真 ,制定了火炮故障评估方案 ,提出故障评判函数的概念。最后展望了虚拟样机技术在武器装备领域的应用前景     

改进粒子群算法在导弹火力分配中的应用

粒子群优化算法是一种新兴的优化技术,思想来源于人工生命和演化计算理论.由于该算法简单易实现,可调参数少,目前已得到广泛研究和应用.在建立导弹武器火力分配数学模型的基础上,运用改进粒子群算法对模型进行了最优化求解,实例的计算结果表明该优化算法对于模型的求解具有较好的收敛性.