基于Multi-Agent敏捷卫星动态任务规划问题

在分析敏捷卫星的特点和卫星多用户需求的基础上,针对敏捷卫星任务规划问题,基于Multi-Agent理论构建了任务分配模型;针对敏捷卫星任务规划初始方案调度中卫星资源失效的情况给出了敏捷卫星动态任务重调度模型;在此基础上,提出了基于诚信机制的可解约合同网任务分配方法,设计了招投标机制、可解约合同网协议以及招投标、评标策略;以敏捷卫星任务规划调度问题为例通过实验获得了满意的结果,表明了模型的合理性以及算法的有效性。     

高焓高压空气加热器壁面传热过程数值计算

以一种高焓高压空气加热器为研究对象,对其冷却通道的流动和传热进行了三维数值仿真,冷却剂采用液态水,燃烧室和喷管分别采用不同的壁面材料,考虑壁面材料物性随温度的变化,并通过加热器热试验证了数值仿真结果的正确性。在此基础上,对比分析了气体辐射、冷却通道结构以及冷却水的流动方式对壁面换热的影响。结果表明:气体辐射对加热器燃烧室段壁面换热影响较大,对喷管壁面换热无明显的影响。在传热计算中,忽略气体辐射会引起较大的误差;冷却通道数和宽度存在最优组合,使得壁面换热量最大。冷却水的流动方式对燃气侧壁面温度影响较小,但对冷却液侧壁面温度的影响较大。     

战斗机隐蔽接敌轨迹优化方法

针对空战对抗的隐蔽作战需求,对战斗机隐蔽接敌方法进行研究。基于战斗机雷达反射截面积的动态特性建立雷达探测威胁模型;以空战态势参数为状态建立接敌引导模型;以给定目标发现概率为暴露阈值进行威胁约束;以最小化接敌过程中累积被发现概率为性能指标;将战斗机隐蔽接敌问题建模为隐蔽性约束下的最优控制问题。为保证算法的实时性和有效性,引入滚动时域控制策略进行在线优化,并采用高斯伪谱法进行数值求解。仿真实验表明,通过路径约束和性能指标双重约束,能有效增强战斗机接敌的隐蔽性,算法实时性能满足战斗机控制的需求。     

基于WSN的目标探测与分类算法

针对WSN监测系统的目标检测与分类问题,提出一种基于直觉模糊推理(IFR)的多源数据融合方法。由模糊推理的思想,设计各状态变量的属性函数。根据目标声强变化和引起的地磁场变化的模型,设计模糊推理规则,并检验了所建规则的合理性。理论分析与仿真结果的对比表明算法能准确地对目标进行分类,且运算量小,适用于计算能力较弱的WSN节点。     

SpaceWire时延抖动的仿真

SpaceWire总线是欧洲空间局为航天应用而设计的一种高速、点对点、全双工的总线网络[1]。时延抖动是表征网络传输性能的关键参数,它度量了端到端的最大传输时延和最小传输时延的差。通过建模仿真,对于某特定应用场景下的SpaceWire总线的时延抖动进行了定量分析和研究。利用Opnet建立仿真模型,通过仿真得出最大传输时延和最小传输时延,从而统计出时延抖动。并且对时延抖动进行定性定量的分析,获得对时延抖动有影响的关键参数。跟据分析结论,提出了改善时延抖动的建议和方法。本文的研究成果对于构建低时延抖动的SpaceWire总线网络提供参考。     

基于微分几何与李群的无人机编队会合方法

在领航-跟随编队模式下,设计了一种基于追缉策略的无人机编队会合方法。首先,基于微分几何曲线论和弗雷涅-塞雷标架建立了无人机非解耦三维运动模型,其中将曲率和挠率作为控制量;结合该模型给出了无人机三维编队会合问题的数学描述,它将导弹制导问题中的终端落角约束映射为编队会合问题中僚机的航迹倾角约束,同时引入额外的航迹方位角约束;然后使用特殊正交群的元素来度量长僚机方向偏差,并通过局部坐标映射将其映射为对应李代数空间中的旋量;接着,基于该旋量设计了编队会合几何导引律,并给出相应的曲率和挠率控制指令;最后,分别在长机稳定平飞和转弯机动条件下进行了多机编队会合数字仿真实验,仿真结果显示僚机能够有效地跟踪长机航向并收敛至指定位形,说明了方法的有效性。     

超高速碰撞形成一次碎片云特性

对超高速碰撞数值模拟方法进行了讨论.采用ANSYS/AUTODYN程序的SPH方法,对球形弹丸超高速撞击时弹丸的破碎、碎片云的形成及扩展过程进行数值模拟,其结果与实验结果进行比较,并验证了计算方法和模型参数的正确性.在此基础上采用数值模拟方法,对钨合金、轧制均质装甲及LY12铝三种材料的球形弹丸超高速撞击靶板之后形成的一次碎片云形貌及演化规律进行了研究,并基于量纲分析方法得出了碎片云特征参数(碎片云头部速度、径向最大膨胀速度及膨胀角)随初始撞击条件的变化规律。     

基于电磁涡旋的雷达目标成像

作为信息载体的电磁波除了传统的携带信息方式外,近年来其波前以电磁涡旋形式展现的信息调制能力也越来越受到关注。本文综述了电磁涡旋在信息调制等方面的研究进展,阐述了其在雷达信息获取方面的潜在应用价值。针对圆形相控阵列,建立了电磁涡旋波照射下理想点散射目标的回波模型。将各阵元的接收信号按照与发射时相同的模式移相后,沿圆周积分即可获得雷达阵列的输出回波。该回波可表示为经平方Bessel函数调幅后的傅里叶基函数的线性组合。结合Bessel函数的频谱特性,分析了轨道角动量态与方位角变量之间的近似对偶关系,利用逆投影和滤波-傅里叶变换方法进行了成像处理。仿真实验表明,电磁涡旋对雷达目标具有方位向成像的潜力。本文的研究可为新体制的雷达设计、目标识别技术的发展提供参考和借鉴。     

Market entry strategy in the presence of market spillovers and efficiency differentiation

Firms form various alliances or use brand extensions to enter new markets in order to improve their operational efficiency and create a positive spillover. However, they do not always know the implications of these strategies for market entry and multimarket competition because the sale of products in one market can have negative spillover effects on product sales in other markets. We present an analytical framework to examine whether and how (i.e., by choosing alliance entry or independent entry) competing firms should enter a market in a situation where market spillovers occur when a firm enters a spillover-producing market to sell products that may increase or decrease the consumers' willingness to pay for products in the primary market. Our analysis shows that the operational efficiency (or quality differentiation ability) of firms in a spillover-producing market varies, and hence, the impact of market spillovers differs for firms. We identify the key factors, such as bargaining power, brand value difference in the primary market, and the extent of efficiencies and spillovers, that determine the firms benefitting from the different entry strategies. Specifically, we show that firms would be more willing to choose an alliance strategy to enter a spillover-producing market if the negative spillover is small and alliance efficiency is high. In contrast, if an alliance entry is not favored, the firms' relative operational efficiency is crucial for them to decide whether to enter the market independently under moderate spillover conditions. Finally, we show the implications of market entry strategies for managers.     

Experimental and numerical investigation of zirconium jet performance with different liner shapes design

This paper studies the shaped charge jet performance in terms of different liner shapes including conical,bell,hemispherical and bi-conical liners.The critical angles and the relevant flow velocities for the zir-conium liner material were calculated analytically and numerically using Autodyn hydro-code.The relationship between the critical collapse angle and the flow velocity was determined for the conditions of jet formation and coherency.Penetration tests according to the standard testing procedures of API-RP34 (Section-Ⅱ) were performed to validate the numerical predictions of the jet performance of the studied liners.It was found that the four shaped charge liners all produced coherent jets with different performances.The penetration depth of the shaped charges with the bell and the bi-conical liner shapes increased by 10.3％ and 22％,respectively,while the crater diameter of shaped charge with hemispherical liner increased by 85％ representing the formation of an explosively-formed-projectile (EFP),when they are compared with the corresponding jet characteristics of a conical liner shaped charge.