A reusable planar triggered spark-gap switch batched-fabricated with PCB technology for medium-and low-voltage pulse power systems

Triggered spark-gap switch is a popular discharge switch for pulse power systems. Previous studies have focused on planarizing this switch using thin film techniques in order to meet the requirements of compact size in the systems. Such switches are one-shot due to electrodes being too thin to sufficiently resist spark-erosion. Additionally, these switches did not employ any structures in securing internal gas composition, resulting in inconsistent performance under harsh atmospheres. In this work, a novel planar triggered spark-gap switch (PTS) with a hermetically sealed cavity was batched-prepared with printed circuit board (PCB) technology, to achieve reusability with low cost. The proposed PTS was inspected by micro-computed tomography to ensure PCB techniques meet the requirements of machining precision. The results from electrical experiments demonstrated that PCB PTS were consistent and reusable with lifespan over 20 times. The calculated switch voltage and circuit current were consistent with those derived from real-world measurements. Finally, PCB PTS was used to introduce hexanitrostilbene (HNS) pellets in a pulse power system to verify its performance.     

Transverse relaxation characteristic and stress relaxation model considering molecular chains of HTPB coating based on pre-strained thermal aging

In order to accurately describe the transverse relaxation characteristic and stress relaxation modulus of HTPB coating during pre-strain thermal aging process, a one month thermal aging test was carried out at 70 C with pre-strain of 0％, 3％, 6％ and 9％, respectively. The low-field 1H NMR and stress relaxation modulus tests were carried out for HTPB coating at different aging stages. The stress relaxation model considering the molecular chains was proposed according to the changes of crosslinking chain and dangling chain of HTPB coating during pre-strain aging. The results showed that with the increase of aging time, the decay rate of transverse relaxation curve became faster, the transverse relaxation time decreased, the value of combined parameter qMrl increased, the proportion of crosslinking chain decreased, while the proportion of dangling chain increased. Moreover, the stress relaxation modulus increased, the crosslinking network structure of HTPB coating became denser and the degree of cross-linking increased. At the initial aging stage, the pre-strain will destroy the crosslinking network structure of HTPB coating to a certain extent. With the increase of aging time, the effect of pre-strain will gradually weaken and the influence of aging on materials will gradually increase. The correlations between the stress relaxation model considering the molecular chains and the test results were more than 0.9950, which can accurately describe the stress relaxation modulus of HTPB coating during the pre-strain thermal aging process.     

有界波模拟器频率特性研究

通过数值计算,研究了快上升沿电磁脉冲信号在有界波模拟器中的传输特性。采用矩量法(MoM)结合快速多极子(FMM)方法,对模拟器在传输不同上升沿电磁脉冲信号时内部的电场波形分别进行了计算。理论分析了有界波模拟器的频率特性,确定了该模拟器所能模拟电磁脉冲上升沿的上限,其结论对设计上升沿2~3ns的大型电磁脉冲场模拟设备具有一定的参考意义。     

半导体量子点光吸收谱线亚结构的PLE谱分析

用半导体量子点的PLE谱分析了光吸收谱的亚结构.用光吸收谱,光致发光谱(PL)和光致发光激发光谱(PLE)对半导体CdSeS量子点玻璃进行了测量.光吸收谱线有明显的量子尺寸效应.PL谱中出现2个发光峰.用PLE谱在光吸收谱的低能侧峰附近探测,发现光吸收谱的低能侧峰附近存在2个峰,其能量间距随着量子点半径的增大而减小,说明了光吸收谱的低能侧峰存在亚结构.证明了PL谱中低能侧峰为缺陷态发光,该峰的PLE谱线说明了该峰的发光来源于1S3/2-1se和2S3/2-1se2能态的电子,甚至更高能态电子的弛豫.     

大学生独处道德、闲暇道德状况与对策

独处道德、闲暇道德是个人情境中的道德,是人类道德体系中独特的方面。大学生独处道德反映着大学生独处生活的要求及其内涵。大学生闲暇道德反映着大学生对闲暇时间的安排、对闲暇活动的选择与评价,以及对闲暇活动意义的认识与态度。它们是大学生思想道德建设重要组成部分。本文从在校大学生独处道德、闲暇道德调查现状出发,进行具体分析与研究,并有针对性地提出相关对策和建议。     

网络游戏赌博性质分析

网络游戏产业快速发展的同时,赌博现象混迹其中。网络游戏赌博与传统赌博只是形式上的不同,其实质就是一种赌博行为。只有从教育、法制、监督、自律四方面综合治理,才能使这个行业健康发展。     

叶片式MRF减振器磁路设计与有限元分析

介绍了以传统叶片式液压减振器为基础而设计的叶片式MRF减振器,并利用Ansoft工程电磁场有限元分析软件,建立其磁路有限元分析模型;通过深入分析该型减振器的磁场分布,为其在车辆悬挂系统半主动控制中的应用奠定了基础。     

基于深度强化学习潜艇攻防对抗训练指挥决策研究

潜艇和水面舰艇编队间的攻防对抗是潜艇作战研究的重点内容,如何确保潜艇在舰艇编队、反潜直升机等兵力的联合封锁下存活和突围,是对潜艇指挥决策的考验.为此,针对潜舰机博弈对抗场景,从深度强化学习和规则推理两个方面构建潜艇智能体,提出两种近端策略优化(Proximal Policy Optimization,PPO)算法改进机...     

声尾流自导鱼雷导引策略仿真与优化

在分析尾流几何模型及其气泡分布密度的规律的基础上,首先建立了较贴近实际的尾流声学仿真模型。其次,按照尾流自导检测流程,基于反射系数推导了尾流层及海面气泡层的回声级模型,由此建立了鱼雷声学自导检测模型。随后,根据研究需要设计了基于鱼雷作战使用评估理论的声尾流自导鱼雷仿真系统,该系统能够真实模拟尾流自导系统工作过程及鱼雷水下运动过程。最后,以该仿真系统为依托,实现了声尾流自导鱼雷应对空穴或断层的修正导引策略的仿真优化。应用结果表明:该研究对于尾流自导鱼雷导引策略优化和尾流自导仿真方法研究具有实际应用价值。     

基于机动动作库的航路飞行仿真方法

提出将航路飞行航迹分段为直线机动段和空间任意平面内的圆弧机动段,再将各段进行切线连接,形成光滑的航迹.这种采用多段组合航迹的生成方法,获得空中的航路点信息后,计算飞行时的空中姿态.仿真结果表明,本方法可以根据输入的航路点数据,有效获得准确的空中航迹.