基于不确定度的专家评价综合方法

针对群决策中专家评价信息的综合处理问题,应用多位专家评价的评价样本不确定度,提出了基于不确定度的数据综合处理方法。该方法能够有效应用于群决策问题,尤其是参与决策人员(专家)较多时,出现专家相对权重可信度不明确而导致评价准确度低的问题,科学地简化了群决策中专家权重的确定过程,便于应用,具有坚实的理论依据和应用价值。通过算例分析,该方法的有效性得到了验证。     

信息知识库中的数据可用性恢复策略

信息知识库在工业生产中能够提高生产效率、降低资源消耗,但数据失效频率高。针对多节点失效重构的纠删码策略较少,且未充分考虑失效数据重构时各参与节点间的链路关系,导致重构效率较低。针对信息知识库数据失效,提出一种新的重构策略。根据节点的数据处理能力,选取数据处理能力最高的新生节点为路由节点;依据路由节点与候选供应节点及剩余空闲节点的链路带宽,确定供应节点及新生节点,从而构建数据重构网络拓扑,提高失效数据重构效率。实验结果证实,与传统纠删码策略性能比较,该方法有较短的重构时间和较高的重构成功率。     

Study of high-speed-impact-induced conoidal fracture of Ti alloy layer in composite armor plate composed of Ti-and Al-alloy layers

In order to understand the mechanism of conoidal fracture damage caused by a high-speed fragment-simulating projectile in titanium alloy layer of a composite armor plate composed of titanium- and aluminum-alloy layers, the ballistic interaction process was successfully simulated based on the Tuler-Butcher and GISSMO coupling failure model. The simulated conoidal fracture morphology was in good agreement with the three-dimensional industrial-computed-tomography image. Further, three main damage zones (zones I, II, and III) were identified besides the crater area, which are located respectively near the crater area, at the back of the target plate, and directly below the crater area. Under the high-speed-impact conditions, in zone II, cracks began to form at the end of the period of crack formation in zone I, but crack formation in zone III started before the end of crack formation in zone II. Further, the damage mechanism differed for different stress states. The microcracks in zone I were formed both by void connection and shear deformation. In the formation of zone I, the stress triaxiality ranged from-2.0 to-1.0, and the shear failure mechanism played a dominant role. The microcracks in zone II showed the combined features of shear deformation and void connection, and during the for-mation process, the stress triaxiality was between 0 and 0.5 with a mixed failure mode. Further, the microcracks in zone III showed obvious characteristics of void connection caused by local melting. During the zone III formation, the triaxiality was 1.0-1.9, and the ductile fracture mechanism was dominant, which also reflects the phenomenon of spallation.     

面向故障预测与健康管理的传感器优化配置

传感器优化配置是保证装备故障预测与健康管理(Prognostics and Health Management,PHM)系统有效实现的基础.针对目前陆军装备保障中缺乏有效的传感器配置方法的现状,以某型防空导弹调平起竖系统为研究对象,建立了考虑传感器失效的PHM系统传感器优化配置模型.对导弹发射车调平起竖系统控制回路进行了分析,在此基础上形成系统的故障-传感器相关性矩阵;根据系统的指标要求建立传感器优化配置模型,采用蚁群算法求解;将结果与粒子群算法进行比较,表明利用蚁群算法取得了更优的配置方案,能够为PHM系统中装备的传感器优化配置提供有效指导.     

Numerical simulation study on penetration performance of depleted Uranium (DU) alloy fragments

Due to its high strength, high density, high hardness and good penetration capabilities, Depleted ura-nium alloys have already shined in armor-piercing projectiles. There should also be a lot of room for improvement in the application of fragment killing elements. Therefore, regarding the performance of the depleted uranium alloy to penetrate the target plate, further investigation is needed to analyze its advantages and disadvantages compared to tungsten alloy. To study the difference in penetration per-formance between depleted uranium alloy and tungsten alloy fragments,firstly, a theoretical analysis of the adiabatic shear sensitivity of DU and tungsten alloys was given from the perspective of material constitutive model. Then, taking the cylindrical fragment penetration target as the research object, the penetration process and velocity characteristics of the steel target plates penetrated by DU alloy frag-ment and tungsten alloy fragment were compared and analyzed, by using finite element software ANSYS/LS-DYNA and Lagrange algorithm. Lastly, the influence of different postures when impacting target and different fragment shapes on the penetration results is carried out in the research. The results show that in the penetration process of the DU and tungsten alloy fragments, the self-sharpening properties of the DU alloy can make the fragment head sharper and the penetrating ability enhance. Under the same conditions, the penetration capability of cylindrical fragment impacting target in vertical posture is better than that in horizontal posture, and the penetration capability of the spherical fragment is slightly better than that of cylindrical fragment.     

Fullerene bisadduct stabilizers: The effect of different addition positions on inhibiting the autocatalytic decomposition of nitrocellulose absorbed nitroglycerin

To explore the effect of different positions and number of pyrrolidine bound to the carbon cage on the stabilization effect of fulleropyrrolidine derivatives to nitrocellulose (NC)/nitroglycerine (NG), we synthesized N-(4-methoxy) phenylpyrrolidine-C₆₀ and four different of bis(N-(4-methoxy) phenylpyrrolidine)-C₆₀ compounds through Prato reaction. Their structures were characterized by UV–vis, ¹H NMR, ¹³C NMR, high-resolution mass spectroscopy, and single-crystal X-ray diffraction. Their stabilization effect to NC/NG were investigated using differential scanning calorimetry, methyl violet, vacuum stabilization effect, weight loss, and accelerating rate calorimeter tests. The results indicated these compounds had excellent stabilization effect to NC/NG. The stabilization effect of the fulleropyrrolidine bisadducts to NC/NG is significantly better than that of fulleropyrrolidine monoadduct and C₆₀. Moreover, the position where pyrrolidine binds to fullerene in fulleropyrrolidine bisadducts is different, and its stabilization effect to NC is also different. The stabilization effect order of different bisadduct isomers to nitrocellulose is as follows: e-edge > trans-2> cis-2> trans-3. Electron paramagnetic resonance (EPR) and FT-IR were used to study the stabilization mechanism of fulleropyrrolidine derivatives to NC/NG. The EPR results also show that fulleropyrrolidine bisadducts with different addition sites have different abilities to absorb nitroxide, and their ability is better than that of the monoadduct and C₆₀, which is consistent with the results of stabilization effect performance test.     

基于程序设计类课程的教育技术本科生创新思维培养研究与实践

本文基于ATDE创新教育理论,以程序设计类课程为教学阵地,对教育技术本科生创新思维培养做出了相关探索与实践。创新思维是高级的问题解决活动。培养学生的创新思维更多体现在对学生解决问题的策略应用方面。对此,本文通过给出的案例,从不同角度详细介绍了程序设计类课程对培养教育技术本科生创新思维的实施对策,以期对提高本专业建设做出有益的探索。     

集合线对对数周期偶极子天线的影响

主要研究了对数周期偶极子天线.基于Pocklington积分方程和全域基函数,采用矩量法结合网络理论建立了天线算法模型;使用该模型计算了在天线阵和集合线共同作用下天线的辐射方向图,得出了集合线在不同频段上对天线辐射性能的影响,并通过截短延长线长度改善了天线低频段的辐射特性,增强了天线轴向方向性.     

基于接触的捞雷具夹紧爪接触面形状优化

介绍了在捞雷具夹紧爪设计过程中引入的基于接触的有限元形状优化设计方法.传统的机械设计方法仅考虑了零件的几何尺寸,而对其形状的设计却考虑不够,导致设计结果不理想.文中将基于接触的有限元形状优化方法应用于传统的机械设计过程.对捞雷具夹紧爪建立基于有限元分析的优化设计模型,使夹紧爪既能满足打捞鱼雷的要求,又得到了优化的形状.结构的特性与受力状况均得到改善.     

指挥军官任职培训效果评估量化指标体系研究

探讨了建立指挥军官任职培训效果评估量化指标体系应遵循的基本原则,提出了建立该指标体系的模型,运用基于主成分的因子分析方法研究了26项评估指标,确定了反映任职培训效果的5类指标类型,对指标类型的内涵进行了分析,说明建立的指标体系具有实际意义.