水面舰艇规避尾流自导鱼雷方法研究

规避机动是水面舰艇对抗尾流自导鱼雷的通用方法,对典型的停车规避、反向尾流、交叉尾流规避方法进行了定性分析,并提出平行尾流方法;通过模拟仿真分析,提出了反向尾流、平行尾流方法的适用条件和使用建议,可为水面舰艇规避尾流自导鱼雷提供参考.     

基于马赛克战的海战场技术体系发展研究

聚焦马赛克战作战概念,按照"作战构想-能力需求-技术支撑-发展建议"的思路,逐步对其技术体系发展趋势进行了研究.通过系统梳理从分布式杀伤链到马赛克战的技术体系演变趋势,分析了马赛克战作战样式的内涵及主要能力需求,剖析了支撑马赛克战的关键技术,总结了马赛克作战的特点及优势,并基于马赛克战的威胁分析,给出了应对策略及发展建议.     

Gas metal arc welding of high nitrogen stainless steel with Ar-N2-O2 ternary shielding gas

High nitrogen stainless steel with nitrogen content of 0.75％was welded by gas metal arc welding with Ar—N2-O2 ternary shielding gas. The effect of the ternary shielding gas on the retention and improvement of nitrogen content in the weld was identified. Surfacing test was conducted first to compare the ability of O2 and CO2 in prompting nitrogen dissolution. The nitrogen content of the surfacing metal with O2 is slightly higher than CO2. And then Ar—N2-O2 shielding gas was applied to weld high nitrogen stainless steel. After using N2-containing shielding gas, the nitrogen content of the weld was improved by 0.1 wt％. As N2 continued to increase, the increment of nitrogen content was not obvious, but the ferrite decreased from the top to the bottom. When the proportion of N2 reached 20％, a full austenitic weld was obtained and the tensile strength was improved by 8.7％. Combined with the results of surfacing test and welding test, it is concluded that the main effect of N2 is to inhibit the escape of nitrogen and suppress the ni-trogen diffusion from bottom to the top in the molten pool.     

A reusable planar triggered spark-gap switch batched-fabricated with PCB technology for medium-and low-voltage pulse power systems

Triggered spark-gap switch is a popular discharge switch for pulse power systems. Previous studies have focused on planarizing this switch using thin film techniques in order to meet the requirements of compact size in the systems. Such switches are one-shot due to electrodes being too thin to sufficiently resist spark-erosion. Additionally, these switches did not employ any structures in securing internal gas composition, resulting in inconsistent performance under harsh atmospheres. In this work, a novel planar triggered spark-gap switch (PTS) with a hermetically sealed cavity was batched-prepared with printed circuit board (PCB) technology, to achieve reusability with low cost. The proposed PTS was inspected by micro-computed tomography to ensure PCB techniques meet the requirements of machining precision. The results from electrical experiments demonstrated that PCB PTS were consistent and reusable with lifespan over 20 times. The calculated switch voltage and circuit current were consistent with those derived from real-world measurements. Finally, PCB PTS was used to introduce hexanitrostilbene (HNS) pellets in a pulse power system to verify its performance.     

Numerical and experimental study on the response characteristics of warhead in the fast cook-off process

The response characteristics of the warhead under thermal stimuli conditions are important to the safety improvement. The goal of this study is to obtain data on the warhead in the fast cook-off process. In this paper, a numerical calculation method is proposed, whose reliability is supported by comparison with experimental results. Through the numerical calculation, the temperature distribution, temperature change, and ignition time are acquired. The numerical results show that the ignition time is 76 s after the warhead started to burn and that the maximum temperature of the explosive's outer surface is 238.3 C at the ignition time. The fast cook-off experiment of the warhead is implemented so as to get the flame temperature and reaction grades that are not available through numerical calculation. The experimental results show that the overpressure fails to reach the preset minimum value which is equivalent to 6 kg of TNT and that the reaction grade is deflagration. The research results have reference value for the design of the warhead and the reduction of detonation risks.     

Hazard evaluation of ignition sensitivity and explosion severity for three typical MH2 (M＝Mg,Ti, Zr) of energetic materials

MgH2, TiH2, and ZrH2 are three typical metal hydrides that have been gradually applied to composite explosives and propellants as additives in recent years. To evaluate ignition sensitivity and explosion severity, the Hartmann device and spherical pressure vessel were used to test ignition energy and ex-plosion pressure, respectively. The results showed that the ignition sensitivity of ZrH2, TiH2 and MgH2 gradually increased. When the concentration of MgH2 is 83.0 g/m3 in Hartmann device, the ignition energy attained a minimum of 10.0 mJ. The explosion pressure of MgH2 were 1.44 times and 1.76 times that of TiH2 and ZrH2, respectively, and the explosion pressure rising rate were 3.97 times and 9.96 times that of TiH2 and ZrH2, respectively, through the spherical pressure vessel. It indicated that the reaction reactivity and reaction rate of MgH2 were higher than that of TiH2 and ZrH2. In addition, to conduct in-depth theoretical analysis of ignition sensitivity and explosion severity, gas production and combus-tion heat per unit mass of ZrH2, TiH2 and MgH2 were tested by mercury manometer and oxygen bomb calorimetry. The experimental results revealed that MgH2 had a relatively high gas production per unit mass (5.15 mL/g), while TiH2 and ZrH2 both had a gas production of less than 2.0 mL/g. Their thermal stability gradually increased, leading to a gradual increase in ignition energy. Furthermore, compared with theoretical combustion heat, the combustion ratio of MgH2, TiH2 and ZrH2 was more than 96.0%, with combustion heat value of 29.96, 20.94 and 12.22 MJ/kg, respectively, which was consistent with the explosion pressure and explosion severity test results.     

基于BP神经网络的防空C3I人机交互性能评估

阐述了BP神经网络的相关原理,建立了防空武器指挥自动化系统人机交互性能评估的指标体系,对应用人工神经网络解决防空武器指挥自动化系统人机交互性能评估的方法问题进行了探讨,并且给出了神经网络的评估模型及算法.通过实例证明该方法是可行的.     

《孙子兵法》治军思想的人本取向

《孙子兵法》揭示了军事领域的基本规律,对军事实践具有普遍的指导意义。《孙子兵法》中阐述的“令文齐武”、“修道保法”、“将帅五德”等治军理论至今给我们以深刻的启迪。其中“文”、“道”、“德”等治军范畴充满了以人为本的精神魅力,闪耀着千古不灭的思想光芒。     

第二次世界大战与战后局部战争刍议

本文阐述了世界大战与局部战争两类战争形态的区别与联系,二战以后两类战争因素的消长;重点考察了二战后局部战争的高技术性、局部性、立体性、快节奏、强化空战和空战形式创新之特点及其发展趋势。     

橡胶筒承受径向载荷时的位移解析解

基于经典弹性理论,利用Euler方程组推导了橡胶筒承受径向载荷时的位移解析解,推导过程中未采用体积不可压缩假设.有限元计算表明,该解析解是正确的.