一种楔块式单向超越离合器结构参数优化设计

为优化楔块式单向超越离合器的结构参数,根据漂浮式微型波力发电装置对超越离合器的要求,建立楔块式超越离合器结构参数的数学模型。以体积最小为优化目标,建立接触疲劳强度和各个尺寸的约束条件,并利用Matlab软件的优化工具箱求解数学模型。最后将常规设计参数和优化设计参数进行比较,结果表明:优化设计的体积只有常规设计的72.33%;漂浮式发电装置的传动系统结构更加紧凑,质量更轻。     

三维均匀化理论预测多孔混凝土等效弹性模量

应用多尺度渐进展开的均匀化理论,推导三维均匀化理论的有限元解法,求解复合材料等效弹性系数。假设多孔混凝土由光滑均匀一致的球孔与水泥石基质组成,提出改进的随机投放方法,生成三维均匀化理论求解的随机单胞模型。以聚苯乙烯泡沫(EPS)混凝土为数值算例,生成6组不同体积分数的EPS混凝土随机单胞模型,通过三维均匀化理论的有限元法计算得到其等效弹性模量。计算结果表明:随机单胞模型能反映细观的非均质性,三维均匀化理论的有限元法计算得到的等效弹性模量变化趋势比较符合Miled的试验结果。     

Layers of Experiments with Adaptive Combined Design

In the field of nanofabrication, engineers often face unique challenges in resource‐limited experimental budgets, the sensitive nature of process behavior with respect to controllable variables, and highly demanding tolerance requirements. To effectively overcome these challenges, this article proposes a methodology for a sequential design of experiments through batches of experimental runs, aptly named Layers of Experiments with Adaptive Combined Design (LoE/ACD). In higher layers, where process behavior is less understood, experimental regions cover more design space and data points are more spread out. In lower layers, experimental regions are more focused to improve understanding of process sensitivities in a local, data‐rich environment. The experimental design is a combination of a space‐filling and an optimal design with a tuning parameter that is dependent on the amount of information accumulated over the various layers. The proposed LoE/ACD method is applied to optimize a carbon dioxide (epet‐CO2) assisted deposition process for fabricating silver nanoparticles with pressure and temperature variables. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 127–142, 2015     

基于改进人工免疫算法的火力分配

随着现代武器杀伤力的极大提高,任何来袭目标的突防都可能造成极大的破坏,这对传统的火力分配提出了挑战。提出一种新的火力集中原则,在满足对来袭目标一定杀伤的前提下,适当转移火力,实现火力总的集中,据此建立了火力分配优化模型。通过改进人工免疫算法的抗体群,提高模型的求解速度,缩短方案的寻优时间。通过实例进行仿真,结果表明,基于改进人工免疫算法能较快速实现火力分配,算法具有一定的可行性。     

降落伞主充气阶段数值模拟

建立了降落伞主充气模型。前体、伞绳及伞衣离散为一系列弹性连接的质量节点,伞衣内部流场为二维无粘、不可压流。利用模型计算了主充气阶段伞衣形状变化、伞衣投影面积变化及伞绳张力。计算结果与试验结果进行了比较,相当吻合。     

A spatial rank‐based multivariate EWMA control chart

Nonparametric control charts are useful in statistical process control when there is a lack of or limited knowledge about the underlying process distribution, especially when the process measurement is multivariate. This article develops a new multivariate self‐starting methodology for monitoring location parameters. It is based on adapting the multivariate spatial rank to on‐line sequential monitoring. The weighted version of the rank‐based test is used to formulate the charting statistic by incorporating the exponentially weighted moving average control scheme. It is robust to non‐normally distributed data, easy to construct, fast to compute and also very efficient in detecting multivariate process shifts, especially small or moderate shifts which occur when the process distribution is heavy‐tailed or skewed. As it avoids the need for a lengthy data‐gathering step before charting and it does not require knowledge of the underlying distribution, the proposed control chart is particularly useful in start‐up or short‐run situations. A real‐data example from white wine production processes shows that it performs quite well. © 2012 Wiley Periodicals, Inc. Naval Research Logistics 59: 91–110, 2012     

空战截击引导航线自动生成算法研究

以等角航线作为截击引导航线计算的基础,研究了满足战术要求的截击引导航线自动生成方法,提出了基于前置点滑动搜索的截击引导航线优化生成算法（LPMSOA,lead-point moving search optimal algorithm)。LPMSOA算法采用二分搜索思想,以到达时间差为优化准则,通过对预定敌机前置点的滑动搜索来寻找最优前置点,通过飞行航迹长度最小化获得最短截击时间,在此基础上对最优截击引导航线进行解算。仿真实验表明,LPMSOA能有效解决空战截击引导航线自动生成问题,算法实时性强,计算精度高。     

直接探测型窄脉冲激光雷达扫描性能分析

针对脉冲激光雷达系统,通过对激光脉冲重叠方式的分析,确定了采用"五点式"重叠方式进行扫描。针对这种扫描方式,分析了方位和俯仰两个方向的扫描光束角步长,确定了对于确定探测空域的最短扫描时间,推导了反射镜在方位和俯仰两个方向的扫描速度以及两者之间的定量关系,给出了脉冲激光雷达扫描器方位扫描速度和俯仰扫描速度设计的理论依据。最后分析了激光器和机械扫描系统所引起的系统误差,并给出了解决方法。     

钢质药筒抽筒阻力的理论计算公式

某型自行火炮采用封闭式药仓,使用钢质药筒,要求抽筒率达到百分之百。但由于该炮膛压较高,使得钢质药筒的变形加大,不抽筒率超标严重。通过建立钢质药筒抽筒阻力的理论计算公式,求出了药筒与药室之间的接触压力和抽筒阻力,与实验结果比较,符合较好。为修改火炮结构,提高抽筒率提供了一条理论依据。     

试论经济力量向军事力量的转化

国家经济力量是军事力量的唯一源泉,军队的战斗力大小是军事力量强弱的重要标志,提高战斗力是军队一切工作的核心。但是,经济力量并不等于就是军事力量和战斗力,要把经济力量变为军队的战斗力还要经过一系列的转化过程。其整个转化过程可分为三个步骤,即经济力量向保障力量要素的转化;保障力量要素向保障能力的转化;保障能力向战斗力的转化。认真研究这些转化过程和转化环节,掌握其转化途径、方法和转化机制,对于促进和加快转化速度,提高转化效率和军队战斗力,具有十分重要的现实意义,是加强质量建军,实现两个根本转变和做好军事斗争准备的关键。