装药长径比对EFP成型作用效果影响分析

针对装药长径比对EFP成型的影响,基于一种球缺型药型罩EFP,利用ANSYS／LS-DYNA仿真软件对其成型过程进行建模仿真,研究EFP成型过程及其各项参数．在该基础上,改变装药高度得到不同的装药长径比数据,并对不同长径比EFP形成过程进行仿真,得到不同装药长径比EFP的速度、速度增长率及炸药能量利用率等数据,为选择最佳装药长径比提供依据．     

STCN的对岸打击时间协同冲突消解研究

为验证航空兵对岸打击中时间协同计划的可行性以及快速地调整时间协同计划,建立了任务间的简单时间约束网络(STCN),并转化成权值矩阵的形式.根据权值矩阵特点,提出了一种检测STCN一致性的权值矩阵法,大大降低了算法复杂度.为加快时间协同计划的调整速度,基于检测结果,提出了一种代价最小的冲突消解方法,避免了消解过程中的重复检测问题,提高了效率,使计划调整更加快捷高效.     

钨球破片对相控阵雷达天线的冲击损伤仿真

利用非线性动力分析软件LS-DYNA 3D,建立了钨球破片在击穿相控阵雷达天线部件下的毁伤仿真模型.对不同初速度的钨球破片以45°入射角对天线等效靶板的侵彻进行仿真分析,得到了钨球破片整个侵彻作用全过程的完整图像和主要数据.通过对结果图像与数据的分析得出:随着钨球破片初速度增大,剩余速度也会随之增大、击穿靶板所需杀伤动能变大、靶板质量损失变大.结论为相控阵雷达天线的战损快速评估与平时修理提供了科学的依据和参考.     

密闭空间战斗部爆炸冲击波的数值模拟

地下目标腔室具有明显的“封闭效应”,通过分析典型地下目标的结构特点,构建了战斗部在某一单体目标内部爆炸的有限元模型,采用ALE算法实现了冲击波对设备的力学加载.研究表明,该方法能够有效模拟冲击波的反射、绕流、衍射等现象,所得结论可为地下目标的结构设计和设备的有效防护提供依据.     

新媒体时代高校校报编辑创新简论

高校校报是高校校园内占主导地位的媒体之一.它是高校加强思想政治教育和开展新闻宣传工作的重要阵地,是传播社会主义先进文化和精神文明建设成果的重要载体.面对社会大众传媒和校园多元化媒体的冲击,原有的办报模式已不适应新时期校报发展的要求,需要进行一系列的编辑创新.高校校报编辑创新实质上涵盖了编辑主体创新和编辑客体创新,具体包括编辑思想观念创新、编辑角色创新、编辑内容和形式及编辑手段创新等多个方面.     

Dynamic regulation on innovation and adoption of green technology with information asymmetry

This study investigates a regulator's dynamic policy to motivate firms' research on and adoption of green technology. In the proposed model, a firm makes unobservable efforts and can hide the technology's arrival from the regulator to avoid adoption costs. We find that the optimal policy follows a simple structure and induces part-time efforts, rather than the maximal effort reported in previous studies. In particular, the regulator should offer no subsidy before the arrival of a technology report, provide a one-time subsidy contingent upon that report, and always set a termination deadline. At the deadline, the firm is forced to select an external option that is associated with social costs. The optimal report-based subsidy decreases with time. Under the optimal policy, the firm works until an effort deadline, makes no effort thereafter, and reports the technology as soon as it arrives. This study also characterizes the necessary and sufficient conditions under which the optimal policy reduces to one that leads, in terms of throughout time, to effort that is maximal or minimal. Our results indicate that policymakers should implement a policy that compensates firms more in the present and less in the future.     

武器装备战斗损伤研究

以“通用武器雷达装备战损规律研究”成果为基础,系统阐述了开展武器装备战斗损伤研究的方法体系,介绍了战斗损伤建模与仿真、装备战斗损伤机理研究、装备战斗损伤分析、战斗损伤试验的相关技术和方法。     

运动与血脂

血脂代谢异常是造成心血管等许多疾病的重要原因。运动能够不同程度的改善机体血脂状况。运动对血脂的影响包括几个方面,本文主要在运动对总胆固醇(TC)、甘油三脂(TG)、低密度脂蛋白(LDL-c)、高密度脂蛋白(HDL-c)、ApoA、ApoB的影响方面给予综述。     

The impact of demand uncertainty on product line design under endogenous substitution

The existing product line design literature devotes little attention to the effect of demand uncertainty. Due to demand uncertainty, the supply‐demand mismatch is inevitable which leads to different degrees of lost sales depending on the configuration of product lines. In this article, we adopt a stylized two‐segment setup with uncertain market sizes and illustrate the interplay between two effects: risk pooling that mitigates the impact of demand uncertainty and market segmentation that facilitates consumer differentiation. Compared to downward substitution, inducing bidirectional substitution through product line decisions including quality levels and prices can yield greater risk pooling effects. However, we show that the additional benefit from the risk pooling effect cannot compensate for the reduced market segmentation effect. We demonstrate that the presence of demand uncertainty can reduce the benefit of market segmentation and therefore the length of product lines in terms of the difference between products. We also propose three heuristics that separate product line and production decisions; each of these heuristics corresponds to one particular form of demand substitution. Our numerical studies indicate that the best of the three heuristics yields performance that is close to optimality. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 143–157, 2015     

在分离式Hopkinson拉杆实验中确定临界实验条件的经验方法

在分离式Hopkinson拉杆实验中,常常需要获得试样在经历一个拉力脉冲拉断情况下的最低应变率,而在分离式Hopkinson拉杆装置中确定对应最低应变率的发射压力需要进行多次尝试性实验。为了更好地解决这一问题,提出一种简单的经验方法,可以通过一次拉断的实验结果计算出一个拉力脉冲拉断试样需要的最小发射压力及相应的应变率,进一步可以预测不同发射压力下的应变率。对4种铝合金试样进行拉伸实验,结果表明,利用提出的经验方法得到的应变率结果与实验结果吻合较好,可以有效地对发射压力和实验应变率进行预估。