美海军推出直升机部队重组计划

为进一步增强舰载直升机部队的战斗力,美国海军最近制订了重组其舰载直升机队伍的计划。这份由美海军作战部长办公室起草并计划在未来12年内付诸实施的名为“直升机部队发展总计划”(HelicopterMasterPlan)的方案目标是将其舰载直升机中队的数量从目前的25个增加到31个,但舰载直升机中队的类型却从现有的三种减少到两种。根据“直升机部队发展总计划”的要求,美海军直升机部队兵力结构将实行完全重组,新组建直升机海上战斗中队HSC,主要担负诸如后勤保障、扫雷以及作战搜寻和救援等任务。新组建直升机海上打击中队HSM其首要任务是发动反…     

Noise and vibration measurements in a Viking military vehicle

Noise and whole-body vibration measurements were made in a Viking military vehicle to determine the variation that should be expected during repeat measures, the effect of speed (up to 60 km/h in 5 km/h increments), and during travel over different types of terrain (comprising concrete road, gravel track and rough cross-country). Measurements were made at various crew positions (including the driver and commander) in both the front and the rear cabs in the vehicles. Three translational axes of vibration were measured in each seat. Two speeds were investigated over road (35 km/h and 55–60 km/h) and gravel (20 km/h and 35 km/h) surfaces. The effect of varying speed of the vehicle on the measured noise and vibration magnitudes was also investigated. The highest sound pressure level (L_Aeq) of 104 dB(A) was measured at the commander’s standing position during travel over concrete road at 55 km/h. Higher noise levels occurred for a standing commander compared with when sitting on the seat. A maximum single axis frequency-weighted vibration magnitude of 1.0 m/s² r.m.s. was measured on the driver’s seat during travel over track at 35 km/h. Higher vibration magnitudes occurred during travel over track compared with travel over road. Both noise and vibration exposure of crew within the Viking vehicle increased with increasing speed of the vehicle.     

Influence of porosity distribution on nonlinear free vibration and transient responses of porous functionally graded skew plates

This article deals with the investigation of the effects of porosity distributions on nonlinear free vibration and transient analysis of porous functionally graded skew (PFGS) plates. The effective material properties of the PFGS plates are obtained from the modified power-law equations in which gradation varies through the thickness of the PFGS plate. A nonlinear finite element (FE) formulation for the overall PFGS plate is derived by adopting first-order shear deformation theory (FSDT) in conjunction with von Karman’s nonlinear strain displacement relations. The governing equations of the PFGS plate are derived using the principle of virtual work. The direct iterative method and Newmark’s integration technique are espoused to solve nonlinear mathematical relations. The influences of the porosity distributions and porosity parameter indices on the nonlinear frequency responses of the PFGS plate for different skew angles are studied in various parameters. The effects of volume fraction grading index and skew angle on the plate’s nonlinear dynamic responses for various porosity distributions are illustrated in detail.     

Critical interfaces in body armour systems

The ballistic performance, and behaviour, of an armour system is governed by two major sets of variables, geometrical and material. Of these, the consistency of performance, especially against small arms ammunition, will depend upon the consistency of the properties of the constituent materials. In a body armour system for example, fibre diameter, areal density of woven fabric, and bulk density of ceramic are examples of critical parameters and monitoring such parameters will form the backbone of associated quality control procedures. What is often overlooked, because it can fall into the User’s domain, are the interfaces that exist between the various products; the carrier, the Soft Armour Insert (SAI), and the one or two hard armour plates (HAP1 and HAP2). This is especially true if the various products are sourced from different suppliers.There are between 30 and 150 individual layers within a typical body armour system, and each of the interfaces between each of those layers will, in some way or another, contribute to the ballistic performance of the system. For example, consider the following interfaces/interlayers: (i) the frictional, sliding, inter-ply surfaces within a soft armour pack, and also between the pack and the carrier, (ii) the air-gaps that may develop within the soft armour pack, (iii) the interconnecting space between the soft armour pack and the hard armour plate, (iv) the nature of the interfaces between adjacent plies of a multiplied backing laminate, even in a highly compressed Ultra High Molecular Weight Polyethylene (UHMWPE) variant, (v) the interlayer between the ceramic and its substrate, within a HAP, and (vi) the geometrical fit between two hard armour plates within a stacked body armour system. This paper will provide a User-friendly overview of all such interfaces and provide unique guidance as to their criticality and influence.     

俄海军面临第五次复兴

第二次世界大战后,苏联经过40多年的发展,形成了一只可以和美国在全球争霸的远洋作战海军。苏联解体后．由于俄罗斯经济长期萧条．俄罗斯海军也面临着前所未有的严峻局面。1989年苏联的造船工业共为其海军制造了78艘潜艇、作战舰艇及勤务舰船,而1995、1996、1997年俄罗斯海军分别只有11、8、6艘新造舰艇服役,到了1999年则只有4艘。     

基于稳健统计特征的飞机识别方法

本文介绍了基于统计特征(StaF)的分类器,它是一种稳健的、用于高距离分辨率(HRR)雷达的飞机识别(ID)方法。在对特征的数量或位置不作先验假定的情况下,我们实时地选择HRR图像的峰值特征。特征提取依靠所观测到图像的信息内容,把特征的数量、位置和幅度作为随机变量。本项研究的主要目的是,通过把对未知目标的识别错误减少到最小,同时维持对已知目标的高识别率的方法来增强分类器的稳健性。结果表明,这种StaF分类器能够显著地减少与未知目标有关的识别错误,同时维持高概率的正确分类。     

Mechanical stress and deformation analyses of pressurized cylindrical shells based on a higher-order modeling

In this research, mechanical stress, static strain and deformation analyses of a cylindrical pressure vessel subjected to mechanical loads are presented. The kinematic relations are developed based on higherorder sinusoidal shear deformation theory. Thickness stretching formulation is accounted for more accurate analysis. The total transverse deflection is divided into bending, shear and thickness stretching parts in which the third term is responsible for change of deflection along the thicknes...     

Assessment of the ballistic response of honeycomb sandwich structures subjected to offset and normal impact

In the present study, experimental and numerical investigations were carried out to examine the behavior of sandwich panels with honeycomb cores. The high velocity impact tests were carried out using a compressed air gun. A sharp conical nosed projectile was impacted normally and with some offset distance(20 mm and 40 mm). The deformation, failure mode and energy dissipation characteristics were obtained for both kinds of loading. Moreover, the explicit solver was run in Abaqus to create the fin...     

An energetic nano-fiber composite based on polystyrene and 1,3,5-trinitro-1,3,5-triazinane fabricated via electrospinning technique

Electrospinning is a simple technique used to fabricate polymeric nano-fibrous membranes. These nano-fibers have found a wide range of valuable applications in the biomedical field. However, it has not been utilized with solid high explosives yet. Herein, the electrospinning technique has been used to fabricate polystyrene(PS)/1,3,5-trinitro-1,3,5-triazinane(RDX) composite nanofibers. The governed electrospinning parameters, voltage, distance from the collector, flow rate, mandrel rotating speed...