顺序PROLOG机KD-PP的系统结构和硬件实现技术

本文提出的KD-PP系统是一种基于编译技术的顺序PROLOG推理系统,该系统的设计为逻辑型程序语言PROLOG的实现提供了硬件支持,因而能高效地执行PROLOG程序。本文从数据表示、存储系统、机器状态和指令系统等方面全面地介绍了顺序PROLOG机KD-PP的系统结构和硬件实现技术。     

弹体旋转角速度的测量

本文研究了弹体旋转角速度测量的机理,采用极化栅网,使弹体的反射信号包含有弹体的旋转角速度信息,并且通过实验予以证明。文中提出了一种旋转角速度测量系统。本文对测量弹体旋转角速度是有一定帮助的。     

被测雷达天线旋转速度的确定

雷达天线连续旋转时,用幅度法测量的是动态方向图。为使其逼近静态方向图的程度能满足要求,天线旋转的速度不应超过ω_(max)。此时,绝大部分方向图谱功率落入整个接收通道的综合带宽B_W之内。根据瞄-5和瞄-10雷达的实际方向图,本文计算出了各个波段被测天线应具有的最大旋转速度。     

基于图形分析的舰空导弹射击效能评估方法

在分析现有舰空导弹武器系统射击效能评估方法的基础上,提出一种基于图形分析的舰空导弹射击效能评估方法。这种方法简单、直观,不仅适用于舰空导弹武器系统,而且可以推广应用于其它类型的防空导弹武器系统。     

基于DTRC的形式自动证明平台及其应用

动态项重写计算(DTRC)是项重写系统(TRS)的元计算模型,具有层次化结构和动态重写等特征,可应用于归纳定理的形式自动证明以及项重写系统弱终止性的形式自动证明等方面.文中介绍了一个基于DTRC的形式自动证明平台及其在TRS弱终止性自动证明上的应用.     

战场态势的定量分析模型

在防空作战中,战场态势的分析非常重要,它是辅助决策的基础.针对战场态势的问题,以集对分析的同异反联系度和距离测度为基础,构造了战场态势的分析模型,进行了深入探讨.最后,通过实例计算表明了分析模型对于评估战场态势的可行性和有效性.     

光滑物体表面反射光偏振特征分析及反射光分离技术

物体表面反射光由镜面反射光和漫反射光组成,针对光滑物体表面镜面反射光和漫反射光的分离问题,建立了一个结合镜面反射和漫反射共同作用的偏振态表征模型,并使用该模型对混合反射区域偏振特征进行分析。基于镜面反射光和漫反射光的偏振特征,根据镜面反射光和漫反射光在光滑物体表面垂直方向及平行方向上的分布关系,采用偏振正交分解的方法实现了镜面反射成分和漫反射成分的求解。利用镜面反射光图像和漫反射光图像之间的相关性,通过梯度下降算法得到镜面反射成分和漫反射成分归一化互相关最小值及其对应的镜面反射偏振度和漫反射偏振度,从而实现反射光的分离。通过对不同场景中获取的反射光图像进行测试,实验结果表明,该算法具有较好的反射光分离效果。     

Background dominant colors extraction method based on color image quick fuzzy c-means clustering algorithm

A quick and accurate extraction of dominant colors of background images is the basis of adaptive camouflage design. This paper proposes a Color Image Quick Fuzzy C-Means (CIQFCM) clustering algorithm based on clustering spatial mapping. First, the clustering sample space was mapped from the image pixels to the quantized color space, and several methods were adopted to compress the amount of clustering samples. Then, an improved pedigree clustering algorithm was applied to obtain the initial class centers. Finally, CIQFCM clustering algorithm was used for quick extraction of dominant colors of background image. After theoretical analysis of the effect and efficiency of the CIQFCM algorithm, several experiments were carried out to discuss the selection of proper quantization intervals and to verify the effect and efficiency of the CIQFCM algorithm. The results indicated that the value of quantization intervals should be set to 4, and the proposed algorithm could improve the clustering efficiency while maintaining the clustering effect. In addition, as the image size increased from 128 × 128 to 1024 × 1024, the efficiency improvement of CIQFCM algorithm was increased from 6.44 times to 36.42 times, which demonstrated the significant advantage of CIQFCM algorithm in dominant colors extraction of large-size images.     

Partial penetration of annular grooved projectiles impacting ductile metal targets

Changing and optimizing the projectile nose shape is an important way to achieve specific ballistic performance. One special ballistic performance is the embedding effect, which can achieve a delayed high-explosive reaction on the target surface. This embedding effect includes a rebound phase that is significantly different from the traditional penetration process. To better study embedment behavior, this study proposed a novel nose shape called an annular grooved projectile and defined its interaction process with the ductile metal plate as partial penetration. Specifically, we conducted a series of low-velocity-ballistic tests in which these steel projectiles were used to strike 16-mm-thick target plates made with 2024-O aluminum alloy. We observed the dynamic evolution characteristics of this aluminum alloy near the impact craters and analyzed these characteristics by corresponding cross-sectional views and numerical simulations. The results indicated that the penetration resistance had a brief decrease that was influenced by its groove structure, but then it increased significantly-that is, the fluctuation of penetration resistance was affected by the irregular nose shape. Moreover, we visualized the distribution of the material in the groove and its inflow process through the rheology lines in microscopic tests and the highlighted mesh lines in simulations. The combination of these phenomena revealed the embed-ment mechanism of the annular grooved projectile and optimized the design of the groove shape to achieve a more firm embedment performance. The embedment was achieved primarily by the target material filled in the groove structure. Therefore, preventing the shear failure that occurred on the filling material was key to achieving this embedding effect.     

Fabrication and characterization of Al-CuO nanocomposites prepared by sol-gel method

In this study, Al-CuO nanocomposites were fabricated by sol-gel method. As a contrast, the thermite was prepared by physical mixing at the equivalence ratio of 0.5, 1, 2, respectively. The intermediates and samples as prepared were characterized by SEM and XRD. The exothermic properties of the two samples prepared at different equivalence ratios were tested and the reaction products were characterized by XRD. The SEM results show that the sample prepared by the sol-gel method demonstrates a micron-sized agglomerated sphere formed by a mutual wrapping of Al NPs and CuO NPs, and the particles are evenly distributed in the agglomerate. In addition, when the content of Al powder is seriously insufficient, the heat release of the sample prepared by physical mixing is 1.6 times that of by sol-gel method. With the increase of Al powder content, the exothermic properties of Al/CuO NPs prepared by sol-gel method began to increase significantly compared with physical mixing and the difference is 1.5 times when the equivalence ratio increases to 2. It can be concluded that the reason for this result may be attributed to the different mass transfer modes of components due to the different morphologies of samples.