水面舰艇规避尾流自导鱼雷方法研究

规避机动是水面舰艇对抗尾流自导鱼雷的通用方法,对典型的停车规避、反向尾流、交叉尾流规避方法进行了定性分析,并提出平行尾流方法;通过模拟仿真分析,提出了反向尾流、平行尾流方法的适用条件和使用建议,可为水面舰艇规避尾流自导鱼雷提供参考.     

Reaction degree of composition B explosive with multi-layered compound structure protection subjected to detonation loading

The explosive reaction degree and protection from explosions are concerns in the military field.In this work,the reaction degree of the composition B explosive was investigated experimentally.Multi-layered compound structures were used as barriers to weaken the blast loads.A comprehensive experiment using a high-speed camera and image processing techniques,side witness plates,and bottom witness plates was presented.Using the experimental fragment velocities,fragment piercing patterns,and damage characteristics,the reaction degree of the explosive impeded by different multi-layered com-pound structures could be precisely differentiated.Reaction parameters of the explosive obstructed by compound structures were obtained by theoretical analysis and numerical simulations.Unlike the common method in which the explosive reaction degree is only distinguished based on the initial pressure amplitude transmitted into the explosive,a following shock wave reflected from the side steel casing was also considered.Different detonation growth paths in the explosive formed.Therefore,all these shock wave propagation characteristics must be considered to analyze the explosive response impeded by compound structures.     

Visual-attention gabor filter based online multi-armored target tracking

The multi-armored target tracking (MATT) plays a crucial role in coordinated tracking and strike. The occlusion and insertion among targets and target scale variation is the key problems in MATT. Most state-of-the-art multi-object tracking (MOT) works adopt the tracking-by-detection strategy, which rely on compute-intensive sliding window or anchoring scheme in detection module and neglect the target scale variation in tracking module. In this work, we proposed a more efficient and effective spatial-temporal attention scheme to track multi-armored target in the ground battlefield. By simulating the structure of the retina, a novel visual-attention Gabor filter branch is proposed to enhance detection. By introducing temporal information, some online learned target-specific Convolutional Neural Networks (CNNs) are adopted to address occlusion. More importantly, we built a MOT dataset for armored targets, called Armored Target Tracking dataset (ATTD), based on which several comparable experiments with state-of-the-art methods are conducted. Experimental results show that the proposed method achieves outstanding tracking performance and meets the actual application requirements.     

一种新型防护结构对爆炸冲击波衰减特性的研究

运用大型有限元软件LS—DYNA,在相同爆炸冲击波作用下,对洞库口部普通钢板防护门和有泡沫铝夹层的钢板防护门两种防护结构的隔爆性能进行了数值模拟和对比分析,结果表明:有泡沫铝夹层的钢板防护门对爆炸冲击波有着良好的衰减特性。同时表明该新型防护结构对洞库口部抗爆炸冲击波设计有着很高的参考价值。     

武器装备全寿命费用宏观控制的系统动力学模型

以武器装备作战能力差距为牵引,以全寿命周期阶段对作战能力的影响为主要依据,建立了基于系统动力学的武器装备全寿命费用控制分析模型,客观、合理地描述了全寿命周期各阶段之间的相互影响,并对武器装备全寿命费用宏观费用控制问题进行了仿真实验分析。     

几何内蕴量对拉伸模具工作面力学性能的影响

曲率、度规不变量、凸凹性等几何内蕴量的不均匀分布直接影响模具的力学性能。本文研究了曲率与变形能、曲率与摩擦耗损功、度规不变量与热辐射、凸凹分布与辐射热通量等几何内蕴量与力学量之间的关系。结果表明:复杂曲面表面高斯曲率的不连续分布将导致表面的变形能、摩擦耗损功出现相应的不连续分布;型面上沿拉伸方向截面线的法曲率越小,摩擦耗损功越大;型面上的热通量会随着拐点数量的增加而增加。这些结果为模具表面优化设计提供了新的理论依据。     

装甲机械化部队信息系统体系结构研究

为确立装甲机械化部队信息系统建设的体系结构,分析了装甲机械化部队信息系统存在的问题,根据装甲机械化部队军事能力需求得出了装甲机械化部队的信息系统的体系结构方案,并就相关问题进行了描述和探讨,可供装甲机械化部队信息系统建设参考。     

船用三层组合外套液压联轴器最优分层分析

液压联轴器外套采用多层筒组合式外套可提高液压联轴器的弹性极限承载能力.文中对液压联轴器不同材料双层组合式外套和同种材料3层组合式外套进行了分析,确定了双层和3层外套分层界面的最佳半径.结果表明,3层外套的弹性极限承载能力比单层外套的弹性极限承载能力提高了31.4%;3层外套的弹性极限承载能力比双层外套的弹性极限承载能力提高了7.4%.     

基于A*算法的实时航迹规划方法研究

根据巡航导弹实时航迹规划时效性强、弹载计算设备的运算速度和内存容量有限等特点,将巡航导弹的机动性能约束与规划空间的划分结合起来,构造了一个较小的搜索空间,然后在此缩小了的搜索空间内利用A*算法具有的启发式特点,可在有效时间内搜索到满足要求的可行航迹.最后,通过一个例子对A*算法进行了验证.     

航空发动机在超声速引射系统中的应用分析

航空发动机可以对空气增压,并且增加气流温度,理论上存在应用于超声速引射系统的可能。分析了气源对引射器性能的影响以及引气对航空发动机的影响,介绍了3种航空发动机在超声速引射系统中可能的布局方案。针对某领域内的排气参数要求,分别对3种布局方案进行了计算分析。计算结果表明,当上游气体压强为0.044×10⁵ Pa和0.029 3×10⁵ Pa时,通过合理选择发动机的布局以及工作参数,发动机可以直接将上游气体排出或者作为驱动气源应用于超声速引射系统。