地空反辐射导弹武器系统作战效能影响评估模型

地空反辐射导弹武器系统融入战术防空体系对防空作战效能的影响如何定量评估是作战运用研究的重要问题。采用阶段概率分析法建立了打击空袭方预警机、电子干扰机对防空作战效能和我方航空兵突击作战效能影响评估模型,通过计算可得出定量数据供作战研究参考。实例计算结果表明地空反辐射导弹武器系统将能极大地提高防空导弹体系作战效能,对于获取防对抗中的信息优势将发挥举足轻重的作用,对地面防空由被动防御向攻防兼备转型将其有重大意义。     

导弹预警系统作战活动的效能评估

导弹预警系统的作战活动效能评价是亟需解决的问题。根据其作为复杂信息系统的特点,引入适合求解信息系统效能的评估方法,该方法根据系统内雷达、红外预警卫星、各型数据链和地面通信网、指挥中心等节点的效能隶属度函数,依据导弹预警的不同作战活动,度量了节点的任务完成能力,计算了导弹预警系统在不同作战活动下的效能,并针对不同射程的导...     

探空火箭级间段的CAD系统

本文在CADKEY绘图软件包的支持下,开发了加筋圆柱结构CAD系统—Hcadx.此系统通过菜单引导用户的操作,可用经验公式或解析法作轴压稳定分析,用罚函数法优化参数,可以在不退出Hcadx的情况下启动CADKEY,自动绘制设计草图。此草图经过适当地编辑、修改、便可成为工程中能接受的工作图纸。     

无线传感网络中多转发节点协作传输策略

协作通信是提高无线传感网络性能的有效技术.为此,针对能量采集的无线传感网络(EH-WSNs),提出多转发节点协作传输(Multi-relay Cooperative Transmitting,MRCT)方案.MRCT方案采用时隙切换/功率分配机制,优化解码信息和传输信息的功率分配;转发节点将所接收的信息进行放大——转发处理,并由将多个转发节点的信息合并后,再传输传感节点,进而提高吞吐量和安全能力.通过仿真分析了MRCT方案的吞吐量和安全中断概率性能.仿真结果表明,提出的MRCT方案的吞吐量和安全性能得到提升.     

基于MIMO协作干扰对齐网络的保密通信算法

通信系统的保密性在信息化作战体系中尤为重要.在存在窃听的多输入多输出(Multiple-Input Multi-ple-Output,MIMO)干扰对齐(Interference Alignment,IA)网络中,传统利用接收或发送端发送人工噪声(Artificial Noise,AN)实现物理层保密通信的方法,会增加收发端的能耗与实施复杂度.为此,提出一种基于MIMO协作IA网络的保密通信算法,推导出了算法可行性条件、合法用户传输速率和保密速率、窃听端窃听速率,并给出了相应的基于最小干扰泄露准则的分布式迭代IA实施方法,有效降低系统复杂度.仿真结果表明,所提算法在保证合法用户传输速率的同时抑制窃听速率,有效提高系统安全性能.     

Multi-objectives nonlinear structure optimization for actuator in trajectory correction fuze subject to high impact loadings

This paper presents an actuator used for the trajectory correction fuze, which is subject to high impact loadings during launch. A simulation method is carried out to obtain the peak-peak stress value of each component, from which the ball bearings are possible failures according to the results. Subsequently, three schemes against impact loadings, full-element deep groove ball bearing and integrated raceway, needle roller thrust bearing assembly, and gaskets are utilized for redesigning the actuator to effectively reduce the bearings' stress. However, multi-objectives optimization still needs to be conducted for the gaskets to decrease the stress value further to the yield stress. Four gasket's structure parameters and three bearings' peak-peak stress are served as the four optimization variables and three objectives, respectively. Optimized Latin hypercube design is used for generating sample points, and Kriging model selected according to estimation result can establish the relationship between the variables and objec-tives, representing the simulation which is time-consuming. Accordingly, two optimization algorithms work out the Pareto solutions, from which the best solutions are selected, and verified by the simulation to determine the gaskets optimized structure parameters. It can be concluded that the simulation and optimization method based on these components is effective and efficient.     

Study of high-speed-impact-induced conoidal fracture of Ti alloy layer in composite armor plate composed of Ti-and Al-alloy layers

In order to understand the mechanism of conoidal fracture damage caused by a high-speed fragment-simulating projectile in titanium alloy layer of a composite armor plate composed of titanium- and aluminum-alloy layers, the ballistic interaction process was successfully simulated based on the Tuler-Butcher and GISSMO coupling failure model. The simulated conoidal fracture morphology was in good agreement with the three-dimensional industrial-computed-tomography image. Further, three main damage zones (zones I, II, and III) were identified besides the crater area, which are located respectively near the crater area, at the back of the target plate, and directly below the crater area. Under the high-speed-impact conditions, in zone II, cracks began to form at the end of the period of crack formation in zone I, but crack formation in zone III started before the end of crack formation in zone II. Further, the damage mechanism differed for different stress states. The microcracks in zone I were formed both by void connection and shear deformation. In the formation of zone I, the stress triaxiality ranged from-2.0 to-1.0, and the shear failure mechanism played a dominant role. The microcracks in zone II showed the combined features of shear deformation and void connection, and during the for-mation process, the stress triaxiality was between 0 and 0.5 with a mixed failure mode. Further, the microcracks in zone III showed obvious characteristics of void connection caused by local melting. During the zone III formation, the triaxiality was 1.0-1.9, and the ductile fracture mechanism was dominant, which also reflects the phenomenon of spallation.     

Fuzzy recognition of missile borne multi-line array infrared detection based on size calculating

In order to improve the infrared detection and discrimination ability of the smart munition to the dy-namic armor target under the complex background, the multi-line array infrared detection system is established based on the combination of the single unit infrared detector. The surface dimension features of ground armored targets are identified by size calculating solution algorithm. The signal response value and the value of size calculating are identified by the method of fuzzy recognition to make the fuzzy classification judgment for armored target. According to the characteristics of the target signal, a custom threshold de-noising function is proposed to solve the problem of signal preprocessing. The multi-line array infrared detection can complete the scanning detection in a large area in a short time with the characteristics of smart munition in the steady-state scanning stage. The method solves the disadvan-tages of wide scanning interval and low detection probability of single unit infrared detection. By reducing the scanning interval, the number of random rendezvous in the infrared feature area of the upper surface is increased, the accuracy of the size calculating is guaranteed. The experiments results show that in the fuzzy recognition method, the size calculating is introduced as the feature operator, which can improve the recognition ability of the ground armor target with different shape size.     

武器装备体系贡献率研究现状分析

武器装备体系贡献率是全面、科学地评估武器装备在体系中发挥作用情况的指标,是目前装备论证领域的研究热点.收集了近年来国内在该领域的研究成果和国外与之相关的研究成果,通过对武器装备体系贡献率的概念内涵、属性特征、评估指标和方法的总结归纳,分析了研究中亟待解决的问题和面临的挑战,为武器装备体系贡献率的研究工作提供参考借鉴.     

A Fuzzy Cluster and Retinex Theory-based Variation Model for Inhomogenous Image Segmentation

A variational inhomogeneous image segmentation model based on fuzzy membership functions and Retinex theory is proposed by introducing the fuzzy membership function.The existence of the solution of the proposed model is proved theoretically.A valid algorithm is designed to make numerical solution of the model under the framework of alternating minimization.The last experimental results show that the model can make segmentation of the real image with intensity inhomogeneity effectively.