建筑物内部电场强度分布特性数值模拟研究

为解决建筑物内部空间电场强度分布难以量化的问题,采用时域有限差分（FDTD）法,对以平面波为激励源,二阶Mur收边界条件的闭合规则建筑物、非规则加窗建筑物和含钢筋非规则加窗建筑物3种模型结构内部电场强度分布特性进行模拟,并通过FEKO软件对计算结果的有效性进行验证。结果表明：普通混凝土材质的建筑物对平面波电场几乎无屏蔽效能;吸波混凝土材质的建筑物对平面波电场的屏蔽效能也较为有限,且随激励源频率的增加,在建筑开窗区域附近的谐振性增强,屏蔽性减弱;通过对植入钢筋墙体建筑物采用细线FDTD法的场强分布计算,证明金属钢筋可提高建筑围护结构的屏蔽效能。     

电子信息化武器装备标准化发展趋势

本文从电子信息化武器装备的概念和标准化工作出发,简要分析了以美军为主的外军电子信息化武器装备标准化发展趋势。并结合我国的国情分析了我军电子信息化武器装备的发展趋势与对策。     

一种基于边缘特征提取的景像匹配方法

下视景像匹配制导中,实时图和基准图的拍摄高度、方位和图像比例尺不完全一致,两图的轮廓形状存在旋转和变形等差异,边缘特征提取方法受图像灰度分布影响存在变形和移位,易导致匹配错误。用侧抑制竞争方法,图像边缘特征提取快速准确,不发生移位,对灰度变化也不敏感。在此基础上,用扩展边缘特征法,克服轮廓变形对边缘匹配的影响,提高精度。试验结果表明,此方法模型简单、抗几何变形能力强且便于实现。     

The impact of demand uncertainty on product line design under endogenous substitution

The existing product line design literature devotes little attention to the effect of demand uncertainty. Due to demand uncertainty, the supply‐demand mismatch is inevitable which leads to different degrees of lost sales depending on the configuration of product lines. In this article, we adopt a stylized two‐segment setup with uncertain market sizes and illustrate the interplay between two effects: risk pooling that mitigates the impact of demand uncertainty and market segmentation that facilitates consumer differentiation. Compared to downward substitution, inducing bidirectional substitution through product line decisions including quality levels and prices can yield greater risk pooling effects. However, we show that the additional benefit from the risk pooling effect cannot compensate for the reduced market segmentation effect. We demonstrate that the presence of demand uncertainty can reduce the benefit of market segmentation and therefore the length of product lines in terms of the difference between products. We also propose three heuristics that separate product line and production decisions; each of these heuristics corresponds to one particular form of demand substitution. Our numerical studies indicate that the best of the three heuristics yields performance that is close to optimality. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 143–157, 2015     

Technical note – operational statistics: Properties and the risk‐averse case

Consider a repeated newsvendor problem for managing the inventory of perishable products. When the parameter of the demand distribution is unknown, it has been shown that the traditional separated estimation and optimization (SEO) approach could lead to suboptimality. To address this issue, an integrated approach called operational statistics (OS) was developed by Chu et al., Oper Res Lett 36 (2008) 110–116. In this note, we first study the properties of this approach and compare its performance with that of the traditional SEO approach. It is shown that OS is consistent and superior to SEO. The benefit of using OS is larger when the demand variability is higher. We then generalize OS to the risk‐averse case under the conditional value‐at‐risk (CVaR) criterion. To model risk from both demand sampling and future demand uncertainty, we introduce a new criterion, called the total CVaR, and find the optimal OS under this new criterion. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 206–214, 2015     

Optimal pricing and scheduling control of product shipping

In this article, we seek to understand how a capacity‐constrained seller optimally prices and schedules product shipping to customers who are heterogeneous on willingness to pay (WTP) and willingness to wait (WTW). The capacity‐constrained seller does not observe each customer's WTP and WTW and knows only the aggregate distributions of WTP and WTW. The seller's problem is modeled as an M/M/N_s queueing model with multiclass customers and multidimensional information screening. We contribute to the literature by providing an optimal and efficient algorithm. Furthermore, we numerically find that customers with a larger waiting cost enjoys a higher scheduling priority, but customers with higher valuation do not necessarily get a higher scheduling priority. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 215–227, 2015     

高重合度人字齿轮传动动态性能优化设计

对人字齿轮传动进行高重合度设计的分析,基于人字齿轮副承载接触分析技术,针对人字齿轮传动中主动小齿轮轴向浮动安装的特点,综合考虑齿轮时变啮合刚度、啮合冲击激励及误差激励等因素的影响,采用集中质量法建立了考虑修形的人字齿轮副弯-扭-轴耦合非线性振动模型,推导了系统无量纲运动微分方程,求解得到齿轮传动系统的振动加速度。以齿轮的振动加速度均方根值为优化的目标函数,针对该类复杂实际工程优化设计中适应值计算费时的缺点,提出了一种改进的具有适应值预测机制的遗传算法,优化得到了人字齿轮的基本设计参数及修形参数,提高了计算效率,通过实例分析验证了该优化方法的有效性。对加工的人字齿轮在减振降噪试验台上进行带载试验,对比优化前后的噪音分贝值,进一步验证了该优化方法对齿轮副减振降噪具有一定作用。     

条（环）状干摩擦阻尼器的微滑移数值模型

提出一种求解弹性条(环)状阻尼器微滑移接触运动的数值方法。将阻尼器和外部激励历程在空间和时间上离散,将相同数量的干摩擦触点布置于离散阻尼器上;把接触运动判据应用到各离散接触点,确定其运动状态并修正刚度矩阵,求解整个阻尼器的平衡方程。该方法避免了有限元软件求解含摩擦接触问题的迭代过程,从而保证了求解的可执行性。同时,克服了微滑移模型理论解法对法向载荷分布规律及载荷时变性的限制,为求解具有局部性以及时变性的法向载荷的结构动态响应提供了更为精确的边界条件,从而可提高结构频响分析的准确性。应用多谐波平衡法分别计算宏滑移和微滑移阻尼器约束下的结构动态响应,发现在结构减振中,微滑移模型能够适应更宽范围的法向力。     

类型学语境下的屋顶生态技术

作为建筑顶部的围护结构,屋顶是室外自然环境与室内进行能量交换的重要途径,也是影响建筑能耗的主要因素之一。通过引入类型学的研究方法,提出将自然能量的交换作为屋顶生态技术的原型,挖掘出"阻止"、"过滤"和"导入"3种技术类型。结合具体工程案例,对3种技术类型的创新性策略进行深入分析与探讨,归纳总结得出较系统和完整的技术类型结论,从而为绿色建筑设计与技术选择提供参考。     

科氏流量计信号相位差测量新算法

对科氏流量计信号进行处理时,传统相位差测量算法存在较大误差。为更好地抑制频谱泄露,提高相位差测量精度,在传统DTFT算法的基础上,通过矩形窗和汉宁窗卷积运算构造出一种新窗——RHC窗。计及负频率成分的影响,提出了一种基于RHC窗的DTFT相位差测量新算法。详细阐述了新算法的原理,并与传统DTFT算法进行了对比仿真,验证了新算法的有效性。