铝合金焊缝表面裂纹高温断裂韧性测试

介绍一种表面裂纹高温断裂韧性Ｋ１ｅ的测试方法，该技术对试样自动加温控温，自动绘制力ｐ与裂纹咀张开位移Ｖ（ｐ—Ｖ）曲线。测试精度高。     

地基雷达探测临近空间高超声速目标优化部署方法

为提高地基雷达对临近空间高超声速目标的探测能力,探讨了一种实用高效的地基雷达优化部署方法,对地基雷达探测临近空间高超声速目标的难点和数学模型进行了分析,提出了地基雷达探测临近空间高超声速目标的部署原则和量化指标,建立了地基雷达优化部署模型,并进行了信息素引导性控制的蚁群算法设计。仿真结果表明,该方法可实现多种程式地基雷达的优化部署,提高了地基雷达优化部署效率和可操作性,为地基雷达探测临近空间高超声速目标的优化部署提供了一种新思路。     

敏捷成像卫星自主规划模型与算法

针对敏捷成像卫星自主规划问题,将规划、决策、执行和信息反馈相结合,提出星上自主规划框架,并介绍框架结构和模块功能。在分析主要约束条件的基础上,建立基于时间线约束网络的问题模型。通过将各种卫星动作前后衔接,组合成能够完成不同任务的动作序列,提出一种面向卫星动作序列的启发式算法。该算法分为规划和决策两个部分,并在卫星执行每一个动作序列的同时基于多种启发式规则进行规划,在动作序列执行结束时进行决策。实验结果表明了自主规划框架和模型的合理性以及算法的有效性。     

二次流引射对保形非对称喷管性能的影响

发动机与飞机后体结构设计合理与否直接影响发动机的部件匹配和性能。利用三维雷诺平均N-S方程和k-ωSST湍流模型对飞翼布局无人机保形非对称喷管在典型飞行状态下开展了内外流流场特性的数值分析,获得了后体尾喷管推力性能和三维流动特征随二次流压力比的变化趋势。结果表明:发动机喷管落压比条件一定的前提下,通过合理优化二次流通道、增大二次流压力比,可以有效改善后体/喷管主流流场特性;当二次流与主流的流量比在0. 2%～1. 86%内时,后体尾喷管轴向推力系数的变化幅度大约为3%,在一定程度上能够减弱发动机主流的过膨胀程度,减小发动机推力损失,无人机后体尾喷管性能得到显著提高。     

基于变转速的柴油抗磨性评定方法

以MRS-1J型四球摩擦磨损试验机为平台,提出了一种变转速条件下柴油抗磨性评定方法。利用VC＋＋对试验机软件进行了改进,增加了负荷-转速程序控制功能,实现了试验机自由设置转速、负荷的变化范围、变化速率和变化模式。通过正交试验方法确定了最佳试验条件,发现试验时间3N1min,负荷11N2N,油温60℃,转速在1 min内由100 r/min线性上升至20N3r/min再线性下降至100 r/min并依次循环时,该试验方法具有良好的重复性和区分性。在与高频往复试验机法的对比中,发现该方法的磨斑直径变化率大于高频往复试验机法,证明变转速四球机法优于高频往复试验机法。     

航天部队试验综合能力评估模型研究

根据航天试验综合能力评估的特点和要求,依据系统工程的理论方法,确定了装备、人员和保障能力为主要评估要素,设置了评估层次和控制点,建立了航天试验综合能力评估模型。该模型由下至上分为3个层次：基础层主要对分系统各岗位人员和所属装备进行评估;分系统层主要对人员素质、装备性能和保障能力进行评估;系统层主要对整个系统的综合试验能力进行评估。通过实例表明该模型大大提高了航天试验综合能力量化评估的准确性。     

Formation and characterization of core-shell CL-20/TNT composite prepared by spray-drying technique

The core-shell 2,4,6,8,10,12-Hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane/2,4,6-Trinitrotoluene (CL-20/TNT) composite was prepared by spray-drying method in which sensitive high energy explosive (CL-20) was coated with insensitive explosive (TNT). The structure and properties of different formulations of CL-20/TNT composite and CL-20/TNT mixture were characterized by scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Laser particle size analyzer, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), differential scanning calorimetry (DSC), impact sensitivity test and detonation performance. The results of SEM, TEM, XPS and XRD show that ϵ-CL-20 particles are coated by TNT. When the ratio of CL-20/TNT is 75/25, core-shell structure is well formed, and thickness of the shell is about 20–30 nm. And the analysis of heat and impact show that with the increase of TNT content, the TNT coating on the core-shell composite material can not only catalyze the thermal decomposition of core material (CL-20), but also greatly reduce the impact sensitivity. Compared with the CL-20/TNT mixture (75/25) at the same ratio, the characteristic drop height of core-shell CL-20/TNT composite (75/25) increased by 47.6% and the TNT coating can accelerate the nuclear decomposition in the CL-20/TNT composites. Therefore, the preparation of the core-shell composites can be regarded as a unique means, by which the composites are characterized by controllable decomposition rate, high energy and excellent mechanical sensitivity and could be applied to propellants and other fields.     

Simulation of the plasticizing behavior of composite modified double-base (CMDB) propellant in grooved calendar based on adaptive grid technology

The frequent occurrence of safety accidents during the calendering process is caused by the flammable and explosive properties of composite modified double-base (CMDB) propellant. Optimization of process parameters with the aid of fluid simulation technology could effectively ensure the safety of the calendering process. To improve the accuracy of the simulation results, material parameters and model structure were corrected based on actual conditions, and adaptive grid technology was applied in the local mesh refinement. In addition, the rheological behavior, motion trajectories and heat transfer mechanisms of CMDB propellant slurry were studied with different gaps, rotational rates and temperatures of two rollers. The results indicated that the refined mesh could significantly improve the contour clarity of boundaries and simulate the characteristics of CMDB propellant slurry reflux movement caused by the convergent flow near the outlet. Compared with the gap, the increased rotational rate of roller could promote the reflux movement and intensify the shear flow of slurry inside the flow region by viscous shear dragging. Meanwhile, under the synergistic effect of contact heat transfer as well as convective heat exchange, heat accumulated near the outlet and diffused along the reflux movement, which led to the countercurrent heat dissipation behavior of CMDB propellant slurry. The plasticizing mechanism of slurry and the safety of calendering under different conditions were explored, which provided theoretical guidance and reference data for the optimization of calendering process conditions. Based on the simulation results, the safety of the CMDB propellant calendering process could be significantly improved with a few tests conducted during a short research and development cycle.     

天线宽频辐射功率的FDTD数值计算

为了实现混响室的仿真电场值与实测值的直接对比,需要计算发射天线的宽频辐射功率．基于坡印廷矢量的面积分,利用时域有限差分算法和快速傅里叶变换,得到了天线宽频辐射功率的快速计算方法．应用该方法对半波偶极子天线和短偶极子天线进行数值仿真,通过仿真值与理论值的比较,验证了该方法的正确性．该方法适用于任何能够用FDTD进行合理建模的电磁设备的辐射功率计算,且一次计算即可得到宽频辐射功率,不仅为混响室仿真结果的归一化打下基础,而且也是分析其他电磁设备宽频辐射特性的可行方法．     

基于回归算法的OFDM系统帧同步和信道估计研究

提出了一种基于回归方法的联合帧同步和信道估计方案.该方案通过添加在OFDM帧格式中的伪噪声码可以得到帧定时和信道冲击响应,由估计到的信道信息,使频域单抽头均衡器完成信号补偿.仿真结果表明:在瑞利信道下,该方案的帧头丢失率要比滑动平均方案和Beek方案低,并且信噪比大于-10 dB时,帧定时的精确度更高.采用该信道估计方案的均方误差要比LS方案和MMSE方案小.最后比较了采用该方案和传统方案的误码性能.