Single‐commodity stochastic network design under demand and topological uncertainties with insufficient data

Stochastic network design is fundamental to transportation and logistic problems in practice, yet faces new modeling and computational challenges resulted from heterogeneous sources of uncertainties and their unknown distributions given limited data. In this article, we design arcs in a network to optimize the cost of single‐commodity flows under random demand and arc disruptions. We minimize the network design cost plus cost associated with network performance under uncertainty evaluated by two schemes. The first scheme restricts demand and arc capacities in budgeted uncertainty sets and minimizes the worst‐case cost of supply generation and network flows for any possible realizations. The second scheme generates a finite set of samples from statistical information (e.g., moments) of data and minimizes the expected cost of supplies and flows, for which we bound the worst‐case cost using budgeted uncertainty sets. We develop cutting‐plane algorithms for solving the mixed‐integer nonlinear programming reformulations of the problem under the two schemes. We compare the computational efficacy of different approaches and analyze the results by testing diverse instances of random and real‐world networks. © 2017 Wiley Periodicals, Inc. Naval Research Logistics 64: 154–173, 2017     

基于频率分集的阵列雷达低角跟踪算法

针对舰载X波段阵列雷达研究了低角跟踪问题,雷达工作在频率分集模式。利用复反射系数与擦地角的关系建立了多频多径条件下阵列接收信号模型。推导了多频极大似然仰角谱,揭示了多频体制抑制仰角模糊的机理,推导出了仰角谱栅瓣间隔,分析了系统带宽对仰角谱的影响。提出谱峰正确选择概率来度量测角性能,通过仿真研究了SNR、目标仰角对仰角谱估计精度的影响,给定目标仰角条件下得到了满足测角精度要求的最小SNR,最小SNR随目标仰角增加并非严格单调下降。     

LEACH—DRT算法中基于神经网络的数据预测算法

为了保证无线传感器网络中数据的完整性,针对基于LEACH路由协议的动态轮时间算法存在的问题,提出一种基于人工神经网络的数据预测算法。该动态轮时间算法中,部分簇因调整后的轮时间不足以完成数据的采集而丢失数据。数据预测算法结合传感器节点数据具有时空相关性的特点,将时空延迟算子引入神经网络模型,并通过建立的神经网络模型对数据进行预测。仿真时采用伯克利英特尔实验室的传感器数据,通过Mafl软件对模型进行测试并分析仿真结果。实验结果表明：该算法对连续多个数据的预测效果理想,预测误差始终保持在较低水平。     

游移方位INS/GPS组合导航在极地地区的应用

针对极地地区复杂的导航环境,研究了一种游移方位INS/GPS组合导航系统,在详细推导游移方位惯性导航系统载体姿态误差的基础上,以位置、速度和姿态信息作为观测量,运用卡尔曼滤波算法进行仿真.结果表明,该组合导航系统满足极地地区的导航需求,引入姿态信息作为观测量,可有效增加对惯性导航的修正能力,提高系统的导航参数估计精度和速度.     

各向异性材料的有效弹性模量

在夹杂理论的基础上,采用用自洽法导出了含分布夹杂的各向异性弹性体的本构关系和有效弹性模量的细观力学表达式。本文得到的公式不仅可以处理含缺陷和损伤的材料的有效弹性模量,而且还可处理诸于纤维复合材料等各向异性材料的理论及有效弹性模量,从而为建立材料细观结构与宏观性能之间的关系提供了理论基础。     

轮式装甲车辆的几何通过性建模与仿真

介绍了轮式装甲车辆通过障碍物的规则,分析了几何障碍物属性和通过判断条件,针对几何障碍物属性,提出了几何障碍物的通过算法,建立了几何通过性模型。采用VC＋＋编程对模型进行了仿真,通过仿真实验验证了算法和模型的可行性。     

A reusable planar triggered spark-gap switch batched-fabricated with PCB technology for medium-and low-voltage pulse power systems

Triggered spark-gap switch is a popular discharge switch for pulse power systems. Previous studies have focused on planarizing this switch using thin film techniques in order to meet the requirements of compact size in the systems. Such switches are one-shot due to electrodes being too thin to sufficiently resist spark-erosion. Additionally, these switches did not employ any structures in securing internal gas composition, resulting in inconsistent performance under harsh atmospheres. In this work, a novel planar triggered spark-gap switch (PTS) with a hermetically sealed cavity was batched-prepared with printed circuit board (PCB) technology, to achieve reusability with low cost. The proposed PTS was inspected by micro-computed tomography to ensure PCB techniques meet the requirements of machining precision. The results from electrical experiments demonstrated that PCB PTS were consistent and reusable with lifespan over 20 times. The calculated switch voltage and circuit current were consistent with those derived from real-world measurements. Finally, PCB PTS was used to introduce hexanitrostilbene (HNS) pellets in a pulse power system to verify its performance.     

Thermodynamics and performance of Al/CuO nanothermite with different storage time

The storage stability of energetic materials is important for its application. Here, the storage stability of Al/CuO nanothermite, which was prepared by electrospray method and stored with different storage time, was systematically researched. The activation energy of Al/CuO nanothermite was calculated by differential scanning calorimetry (DSC). The ignition temperature and the curve pressure history of Al/CuO nanothermite was measured using ignition temperature measuring device and constant-volume pressurization tests, respectively. Further, the thermites were characterized by X-ray Diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM) and Transmission electron microscopy (TEM). The results show that the morphology of the thermites did not change significantly. The activation energy was decreased from 254.1 kJ/mol to 181.8 kJ/mol after storage for 13 months. When stored for 0, 7 and 13 months, the peak pressures of Al/CuO nanothermite were 685.8 kPa, 626.3 kPa and 625.5 kPa, respectively. In addition to the ignition temperature, it was 775 ℃, 739 ℃ and 754 ℃, respectively. This result indicated that the ignition and combustion properties of Al/CuO nano-thermite are obviously reduced when stored for a long time, at room temperature.     

新型涂层固相微萃取-气相色谱分析检测VX

以溶胶凝胶和交联固化相结合的方法制备了杯[4]芳烃开链冠醚／羟基硅油（Calix[4]open chain ether／OH-TSO）复合涂层固相微萃取探头,采用固相微萃取与气相色谱联用的方法测定水和土壤中的VX．并对自制探头的萃取效率、热稳定性、抗溶剂冲洗能力、使用寿命,保质期以及探头制备重现性等性能进行了系统研究．     

On the contribution of defense innovation to China’s economic growth

As the most knowledge-intensive industrial sectors, China’s defense industries are developing very fast. The present paper will explore the contribution of China’s defense innovation to its economic growth. Cobb–Douglas production function, integrating defense and non-defense stock in knowledge, is applied during the course. In addition, an input–output analysis of defense equipment procurement was done. Positive effect of China’s defense innovation on economic growth has been revealed by comparing the results from the two methods. And some suggestions are made to strengthen the effect.