刀具磨损监测的随机向量相关度量法

本文提出了一种运用功率累积和与n 维随机向量相关度量监测刀具磨损的新方法,即通过计算刀具三向振动加速度的相关度量系数,主轴扭矩或某项振动加速度的功率累积和综合监测刀具的磨损、破损以及刀具磨损的程度。该法在简单性、可靠性等方面比以往提出的方法有较大的进步,因而使得本方法具有很大的应用前景。文中对该法的理论基础进行了严格的证明,并给出了实验论证结果。     

多自由度系统及结构非线性自由振动的摄动谐波平衡法

本文在谐波平衡法的基础上,引入摄动的思想,得出了解多自由度系统及结构的非线性自由振动的新方法。其解的形式为小参数和谐波的级数形式,因此,其解不会遗漏任何项,方程为线性的代数方程;利用线性变换,将系数矩阵变换为对角阵,一旦求出线性模态,就可得其解,比线性化迭代法优越得多。算例表明,本文方法对于小振幅有较高的精度,对于较大振幅其结果也是令人满意的。     

最小费用树

本文在赋边权w和顶点权θ的网络中,建立了最小费用树问题的网络模型。文中对问题的复杂性进行了讨论并给出了求解问题的算法     

随机环境中的M/MY/1排队系统

文献［４］讨论了随机环境中的Ｍ／Ｍ／１排队模型，本文提出和讨论随机环境中的Ｍ／Ｍｙ／１排队模型，在统计平衡条件下给出了队长和等待队长的平稳分布以及平均队长和平均等待队长，得到了等待时间和逗留时间分布以及平均等待时间和平均逗留时间。     

论东北战场1947年夏季攻势

全国解放战争时期,东北战场最先揭开战略反攻序幕,民主联军从吉林以东、长春以西、郑家屯以北、梅河口以南及辽南、热西、冀东等七个重点方向上同时发动进攻,其势如潮涌,纵横关内外。大战结果,民主联军于战略上贯通南北满,一举扭转东北战局,开始掌握战场主动权,迫使东北国民党军转入战略防御,有力地支援了关内战场作战。     

Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

Cost effectiveness of using a correlated variable in a complete inspection plan when inspection error is present

Due to advances in automated manufacturing systems and automatic inspection equipment, complete inspection (screening) has drawn increased attention recently and has become a widespread practice. Screening can be based on the performance variable of interest or on a variable which is correlated with the performance variable. Using a correlated variable as the screening variable is attractive when the inspection on the performance variable is destructive or costly. The purpose of this article is to illustrate both theoretically and empirically when a correlated variable rather than the performance variable should be used as the screening variable when inspection error is present.     

浅析以法律形式控制网络军备竞赛的必要性

网络战是近年来全球军事界相当热的话题,其作为一种全新概念的组织机构,已经开始登上了军事舞台。美国、韩国等国家先后宣布组建网络司令部,引起了全球网络军备竞赛的热潮。文章探讨网络军备竞赛的发展现状和特点,分析以法律形式进行控制的必要性,能够全面系统的了解网络军备竞赛所带来的严重危害,为控制军备竞赛的对策和决策提供一些建议。     

Estimating failure time distribution and its parameters based on intermediate data from a Wiener degradation model

Instead of measuring a Wiener degradation or performance process at predetermined time points to track degradation or performance of a product for estimating its lifetime, we propose to obtain the first‐passage times of the process over certain nonfailure thresholds. Based on only these intermediate data, we obtain the uniformly minimum variance unbiased estimator and uniformly most accurate confidence interval for the mean lifetime. For estimating the lifetime distribution function, we propose a modified maximum likelihood estimator and a new estimator and prove that, by increasing the sample size of the intermediate data, these estimators and the above‐mentioned estimator of the mean lifetime can achieve the same levels of accuracy as the estimators assuming one has failure times. Thus, our method of using only intermediate data is useful for highly reliable products when their failure times are difficult to obtain. Furthermore, we show that the proposed new estimator of the lifetime distribution function is more accurate than the standard and modified maximum likelihood estimators. We also obtain approximate confidence intervals for the lifetime distribution function and its percentiles. Finally, we use light‐emitting diodes as an example to illustrate our method and demonstrate how to validate the Wiener assumption during the testing. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

Optimal control of a production process subject to AOQL constraint

A production process which exhibits a decreasing pattern in the mean quality during the course of production is considered. A lower limit is specified for the quality characteristic of interest, and an item is classified as defective if its quality characteristic is below this lower limit. The major concern of the manufacturer is the average outgoing quality (AOQ). Hence, the process has to be adjusted after a time to avoid producing a large proportion of defective items due to deteriorating quality. To meet consumer specifications, an average outgoing quality limit (AOQL) is specified. A process-control scheme is developed in which decisions as to the upper and lower limit of the process mean are made based upon the choice of an AOQL. We discuss the decision problem of selecting the starting level of the process mean, and the level at which the process mean should be adjusted back to the starting level, so that the AOQ is not larger than AOQL. We consider a cost model which includes a fixed cost for adjustment, and a production cost which is assumed to be a function of the quality level. Due to the complexity of the model, a search procedure is used to find the optimal solution. In addition, an approximate solution which requires only simple calculations is developed, and is shown to be very effective in finding near-optimal solutions.