Influences of different crossing types on dynamic response of underground cavern subjected to ground shock

An intersecting cavern is a common structural form used in underground engineering, and its safety and stability performance directly control the service performance of the whole project. The dynamic re-sponses of the three kinds of crossing type (+-shaped, T-shaped, L-shaped) caverns subjected to ground shock were studied by numerical simulation. The velocity plus force mode boundary setting method was proposed in the coupled static and dynamic analysis of a deep underground cavern. The results show that, among the three types of crossing caverns, the+-shaped cavern is the most significantly affected by the dynamic action, followed by T-shaped, and then L-shaped caverns. The vault settlement, straight wall deformation, vault peak particle velocity, effective plastic strain of surrounding rock, and maximum principal stress and strain at the bottom of the lining of the straight wall increase with the increase of cavern span. The vault settlement, straight wall deformation, effective plastic strain of surrounding rock, and the maximum principal stress and strain at the bottom of lining to the straight wall decrease with the increase of lateral pressure coefficient, and the peak particle velocity at the vault increases. The variation is small compared with the change of cavern span. The influence range of the underground cavern intersection is two cavern diameters from the intersection centre. The bottom of the straight wall at the intersection is the weak part. It is suggested to thicken the support locally to improve the stability of the cavern.     

A reusable planar triggered spark-gap switch batched-fabricated with PCB technology for medium-and low-voltage pulse power systems

Triggered spark-gap switch is a popular discharge switch for pulse power systems. Previous studies have focused on planarizing this switch using thin film techniques in order to meet the requirements of compact size in the systems. Such switches are one-shot due to electrodes being too thin to sufficiently resist spark-erosion. Additionally, these switches did not employ any structures in securing internal gas composition, resulting in inconsistent performance under harsh atmospheres. In this work, a novel planar triggered spark-gap switch (PTS) with a hermetically sealed cavity was batched-prepared with printed circuit board (PCB) technology, to achieve reusability with low cost. The proposed PTS was inspected by micro-computed tomography to ensure PCB techniques meet the requirements of machining precision. The results from electrical experiments demonstrated that PCB PTS were consistent and reusable with lifespan over 20 times. The calculated switch voltage and circuit current were consistent with those derived from real-world measurements. Finally, PCB PTS was used to introduce hexanitrostilbene (HNS) pellets in a pulse power system to verify its performance.     

聚合物抗静电改性机理与工艺

采用离子注入和电子束等物理方法,对PTFE、KPVC、PMMA等聚合物材料进行了抗静电改性实验。实验结果表明,合理选择改性工艺,可以得到优良的抗静电材料。本文对离子注入和电子束的抗静电改性机理进行了分析,提出了选择最佳改性工艺条件的原则。     

混纺导电纤维及其织物电晕放电实验研究

本文报导了混纺导电纤维及其织物的电晕放电实验研究结果,指出导电纤维的电晕放电对人体静电荷的消散不起主要作用,而只有人体静电接地,才能较好地消除静电隐患,进而明确了防静电工作服的作用机理。     

装备动员与知识产权关系初探

首先对装备动员中的知识产权进行了定义和分类,然后分析了知识产权因素对装备动员的影响,最后提出了解决装备动员中知识产权问题的对策。     

机载信息系统人机界面设计原则

本文突出了"以用户为中心"的设计理念,对人机界面设计的基本理论进行了研究,提出机载信息系统人机界面设计原则,在界面设计中遵循这些原则有助于提高机载信息系统的人机交互能力。     

Modeling and analysis of a mixed‐model assembly line with stochastic operation times

We consider a mixed‐model assembly line (MMAL) comprised a set of workstations and a conveyor. The workstations are arranged in a serial configuration. The conveyor moves at a constant speed along the workstations. Initial units belonging to different models are successively fed onto the conveyor, and they are moved by the conveyor to pass through the workstations to gradually generate final products. All assembling tasks are manually performed with operation times to be stochastic. An important performance measure of MMALs is overload times that refer to uncompleted operations for operators within their work zones. This paper establishes a method to analyze the expected overload times for MMALs with stochastic operation times. The operation processes of operators form discrete time nonhomogeneous Markov processes with continuous state spaces. For a given daily production schedule, the expected overload times involve in analyzing the Markov processes for finite horizon. Based on some important properties of the performance measure, we propose an efficient approach for calculating the expected overload times. Numerical computations show that the results are very satisfactory. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

孙子的价值观防御思想探析

价值观的认同,是军队作战的基础,价值观防御是其它军事防御活动的根本。从《孙子兵法》中可以发现价值观防御的重要性,价值观防御与官兵的认识水平、全面素质的关联,以及价值观防御要处理好的几个关系。     

加农炮身管纵向振动的固有特征分析

建立了加农炮身管纵向振动的力学模型,推导出了频率方程,给出了固有频率的数值计算结果,描绘了加农炮身管纵向振动的固有振型,对影响加农炮身管纵向振动固有特征的各种因素进行了分析。     

数据融合技术与潜艇指控系统的发展

就潜艇指控系统的现状和发展,综述了数据融合技术在潜艇指控系统中的应用前景。