飞行器试验多测控目标发射零点应急处理方法

飞行器飞行试验任务中,发射零点T0是整个测控系统启动运行的基准点,是保证测控系统有条不紊正常工作的关键因素。特别是执行多个测控目标连射飞行试验任务,多个发射零点的正确处理更是关乎试验任务的成败。在分析发射零点形成机制基础上,对发射零点在指控系统实时测控软件中的处理方法进行了研究,提出了一种实时测控软件重启后重新获得多测控目标正确发射零点的应急处理方法,解决了试验过程中一旦实时测控软件因重大软件故障导致初始发射零点丢失的问题,保障了试验任务的顺利进行。     

二维弹道修正弹气动特性与稳定性仿真

在某型迫击炮无控弹结构基础上,将其引信改为固定鸭舵修正引信,采取直接利用原有尾翼结构、加大翼片面积和减少翼片数量三种尾翼设计形式,分别构建3个弹体模型,运用CFD计算软件对3种弹体模型的阻力系数、升力系数、俯仰力矩系数变化规律进行仿真,得到具有一定修正能力且满足全弹道飞行稳定性要求的弹体模型方案,其仿真结论可为尾翼稳定迫击炮二维弹道修正弹的研究提供参考。     

改进遗传算法求解电力网攻击无人机分队任务分配

遗传算法因其出色的寻优能力,自提出后就被广泛用于工程技术上的最优化问题求解。根据电力网攻击无人机分队任务分配的实际需要,提出基于遗传算法思想的解决方案,并在原算法基础上,采用种群分组进化的策略进行改进。详细介绍算法的基本原理和仿真步骤,再举出实际算例进行仿真,实验结果证明算法的改进取得了良好效果。     

Layers of Experiments with Adaptive Combined Design

In the field of nanofabrication, engineers often face unique challenges in resource‐limited experimental budgets, the sensitive nature of process behavior with respect to controllable variables, and highly demanding tolerance requirements. To effectively overcome these challenges, this article proposes a methodology for a sequential design of experiments through batches of experimental runs, aptly named Layers of Experiments with Adaptive Combined Design (LoE/ACD). In higher layers, where process behavior is less understood, experimental regions cover more design space and data points are more spread out. In lower layers, experimental regions are more focused to improve understanding of process sensitivities in a local, data‐rich environment. The experimental design is a combination of a space‐filling and an optimal design with a tuning parameter that is dependent on the amount of information accumulated over the various layers. The proposed LoE/ACD method is applied to optimize a carbon dioxide (epet‐CO2) assisted deposition process for fabricating silver nanoparticles with pressure and temperature variables. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 127–142, 2015     

基于改进人工免疫算法的火力分配

随着现代武器杀伤力的极大提高,任何来袭目标的突防都可能造成极大的破坏,这对传统的火力分配提出了挑战。提出一种新的火力集中原则,在满足对来袭目标一定杀伤的前提下,适当转移火力,实现火力总的集中,据此建立了火力分配优化模型。通过改进人工免疫算法的抗体群,提高模型的求解速度,缩短方案的寻优时间。通过实例进行仿真,结果表明,基于改进人工免疫算法能较快速实现火力分配,算法具有一定的可行性。     

A spatial rank‐based multivariate EWMA control chart

Nonparametric control charts are useful in statistical process control when there is a lack of or limited knowledge about the underlying process distribution, especially when the process measurement is multivariate. This article develops a new multivariate self‐starting methodology for monitoring location parameters. It is based on adapting the multivariate spatial rank to on‐line sequential monitoring. The weighted version of the rank‐based test is used to formulate the charting statistic by incorporating the exponentially weighted moving average control scheme. It is robust to non‐normally distributed data, easy to construct, fast to compute and also very efficient in detecting multivariate process shifts, especially small or moderate shifts which occur when the process distribution is heavy‐tailed or skewed. As it avoids the need for a lengthy data‐gathering step before charting and it does not require knowledge of the underlying distribution, the proposed control chart is particularly useful in start‐up or short‐run situations. A real‐data example from white wine production processes shows that it performs quite well. © 2012 Wiley Periodicals, Inc. Naval Research Logistics 59: 91–110, 2012     

空战截击引导航线自动生成算法研究

以等角航线作为截击引导航线计算的基础,研究了满足战术要求的截击引导航线自动生成方法,提出了基于前置点滑动搜索的截击引导航线优化生成算法（LPMSOA,lead-point moving search optimal algorithm)。LPMSOA算法采用二分搜索思想,以到达时间差为优化准则,通过对预定敌机前置点的滑动搜索来寻找最优前置点,通过飞行航迹长度最小化获得最短截击时间,在此基础上对最优截击引导航线进行解算。仿真实验表明,LPMSOA能有效解决空战截击引导航线自动生成问题,算法实时性强,计算精度高。     

直接探测型窄脉冲激光雷达扫描性能分析

针对脉冲激光雷达系统,通过对激光脉冲重叠方式的分析,确定了采用"五点式"重叠方式进行扫描。针对这种扫描方式,分析了方位和俯仰两个方向的扫描光束角步长,确定了对于确定探测空域的最短扫描时间,推导了反射镜在方位和俯仰两个方向的扫描速度以及两者之间的定量关系,给出了脉冲激光雷达扫描器方位扫描速度和俯仰扫描速度设计的理论依据。最后分析了激光器和机械扫描系统所引起的系统误差,并给出了解决方法。     

钢质药筒抽筒阻力的理论计算公式

某型自行火炮采用封闭式药仓,使用钢质药筒,要求抽筒率达到百分之百。但由于该炮膛压较高,使得钢质药筒的变形加大,不抽筒率超标严重。通过建立钢质药筒抽筒阻力的理论计算公式,求出了药筒与药室之间的接触压力和抽筒阻力,与实验结果比较,符合较好。为修改火炮结构,提高抽筒率提供了一条理论依据。     

试论经济力量向军事力量的转化

国家经济力量是军事力量的唯一源泉,军队的战斗力大小是军事力量强弱的重要标志,提高战斗力是军队一切工作的核心。但是,经济力量并不等于就是军事力量和战斗力,要把经济力量变为军队的战斗力还要经过一系列的转化过程。其整个转化过程可分为三个步骤,即经济力量向保障力量要素的转化;保障力量要素向保障能力的转化;保障能力向战斗力的转化。认真研究这些转化过程和转化环节,掌握其转化途径、方法和转化机制,对于促进和加快转化速度,提高转化效率和军队战斗力,具有十分重要的现实意义,是加强质量建军,实现两个根本转变和做好军事斗争准备的关键。