多兵种交战中作战指数迭代计算方法及收敛性研究

对于大规模多兵种交战,作战指数评估是进行军事决策的重要依据.针对传统作战指数评估方法依赖专家经验知识的问题,借鉴强化学习理论,提出了多兵种交战兰彻斯特方程中作战指数迭代计算方法,利用作战指数和火力分配策略的递推关系,循环更新作战指数直至结果收敛,重点考察了固定更新率、梯度指数递减方法和动量梯度方法对迭代收敛性的影响,通过调节更新率、递减强度和动量强度等超参数取值,显著提高了迭代收敛速度和稳定性.     

Effects of total pressures and equivalence ratios on kerosene/air rotating detonation engines using a paralleling CE/SE method

In this paper, the kerosene/air rotating detonation engines(RDE) are numerically investigated, and the emphasis is laid on the effects of total pressures and equivalence ratios on the operation characteristics of RDE including the initiation, instabilities, and propulsive performance. A hybrid MPI + OpenMP parallel computing model is applied and it is proved to be able to obtain a more effective parallel performance on high performance computing(HPC) systems. A series of cases with the total pressure of 1 MPa, 1.5 MPa, 2 MPa, and the equivalence ratio of 0.9, 1, 1.4 are simulated. On one hand, the total pressure shows a significant impact on the instabilities of rotating detonation waves. The instability phenomenon is observed in cases with low total pressure (1 MPa) and weakened with the increase of the total pressure. The total pressure has a small impact on the detonation wave velocity and the specific impulse. On the other hand, the equivalence ratio shows a negligible influence on the instabilities, while it affects the ignition process and accounts for the detonation velocity deficit. It is more difficult to initiate rotating detonation waves directly in the lean fuel operation condition. Little difference was observed in the thrust with different equivalence ratios of 0.9, 1, and 1.4. The highest specific impulse was obtained in the lean fuel cases, which is around 2700 s. The findings could provide insights into the understanding of the operation characteristics of kerosene/air RDE.     

Delamination process in cross-ply UHMWPE laminates under ballistic penetration

Cross-ply unidirectional laminates made of ultra-high molecular weight polyethylene fibers are widely used as components of bullet-proof vests. To simulate the delamination process of the material under penetration, we constructed a numerical mechanical model, which was validated by tests using 7.62 × 39 mm rifle bullets penetrating laminates of different thicknesses. The results show that the delamination region is essentially diamond-shaped. The simulated delamination region is in good agreement with the experimental data. It is found that the delamination region increases with the compression modulus along the fiber direction. The delamination region increases when the shear strength between the fabric layers decreases;However, it is little influenced by the normal strength. The delamination region of the front face of the laminate is little influenced by the failure strain of the material and the initial velocity of the bullet. The delamination region of the back face increases with the failure strain and decreases with the initial velocity.     

Numerical and experimental study on the response characteristics of warhead in the fast cook-off process

The response characteristics of the warhead under thermal stimuli conditions are important to the safety improvement. The goal of this study is to obtain data on the warhead in the fast cook-off process. In this paper, a numerical calculation method is proposed, whose reliability is supported by comparison with experimental results. Through the numerical calculation, the temperature distribution, temperature change, and ignition time are acquired. The numerical results show that the ignition time is 76 s after the warhead started to burn and that the maximum temperature of the explosive's outer surface is 238.3 C at the ignition time. The fast cook-off experiment of the warhead is implemented so as to get the flame temperature and reaction grades that are not available through numerical calculation. The experimental results show that the overpressure fails to reach the preset minimum value which is equivalent to 6 kg of TNT and that the reaction grade is deflagration. The research results have reference value for the design of the warhead and the reduction of detonation risks.     

Hazard evaluation of ignition sensitivity and explosion severity for three typical MH2 (M＝Mg,Ti, Zr) of energetic materials

MgH2, TiH2, and ZrH2 are three typical metal hydrides that have been gradually applied to composite explosives and propellants as additives in recent years. To evaluate ignition sensitivity and explosion severity, the Hartmann device and spherical pressure vessel were used to test ignition energy and ex-plosion pressure, respectively. The results showed that the ignition sensitivity of ZrH2, TiH2 and MgH2 gradually increased. When the concentration of MgH2 is 83.0 g/m3 in Hartmann device, the ignition energy attained a minimum of 10.0 mJ. The explosion pressure of MgH2 were 1.44 times and 1.76 times that of TiH2 and ZrH2, respectively, and the explosion pressure rising rate were 3.97 times and 9.96 times that of TiH2 and ZrH2, respectively, through the spherical pressure vessel. It indicated that the reaction reactivity and reaction rate of MgH2 were higher than that of TiH2 and ZrH2. In addition, to conduct in-depth theoretical analysis of ignition sensitivity and explosion severity, gas production and combus-tion heat per unit mass of ZrH2, TiH2 and MgH2 were tested by mercury manometer and oxygen bomb calorimetry. The experimental results revealed that MgH2 had a relatively high gas production per unit mass (5.15 mL/g), while TiH2 and ZrH2 both had a gas production of less than 2.0 mL/g. Their thermal stability gradually increased, leading to a gradual increase in ignition energy. Furthermore, compared with theoretical combustion heat, the combustion ratio of MgH2, TiH2 and ZrH2 was more than 96.0%, with combustion heat value of 29.96, 20.94 and 12.22 MJ/kg, respectively, which was consistent with the explosion pressure and explosion severity test results.     

元记忆研究的历史回顾与展望

元记忆研究是当前认知心理学研究的热点,它是元认知的重要组成部分。它是人对自己记忆系统的内容、功能的认知和评价,以及对记忆系统的监控。本文回顾了元记忆研究的历史成果,也指出了存在的问题和今后的研究方向。     

论赤壁之战敌对双方战争指导的优劣得失

发生在建安十三年(公元208年)的赤壁之战以其深远独特的影响、丰富多样的作战形式在三国乃至整个中国军事史上占据着不可替代的地位。它是一场典型的以弱胜强、以少胜多的战争,是一场囊括了野战、攻城、追击、遭遇、火攻、退却、水战等多种作战形式的战争,是中国历史上第一次在长江流域进行的大规模江河作战,同时又是中国历史上第一次企图通过江河作战而谋求实现统一而最终失败的战争。无论从大战略的高度来看,还是从军事战略的角度来分析,赤壁之战都是一场具有多种典型价值的战争。今天,我们分析战争敌对双方曹军与孙刘联军战争指导的优劣得失,仍能获得历史的经验与有益的启示。     

信息化战争中的纳米科技

纳米材料由于其独特的光、电、力、磁效应近年来受到人们广泛的关注,综述了目前国内外纳米科技的研究动态,着重介绍了现有纳米科技在高科技战争中的应用,及其潜在的发展方向．     

基于专家系统的防化保障预案评估研究

人工智能技术在众多领域获得广泛应用．为满足现代战争对防化指挥手段的现代化要求,针对不易量化的防化指挥决策问题的评估,提出了构建知识库并应用模糊推理机制建立专家系统,据此进行防化保障预案的评估选优方法,并对该方法的求解过程进行了探讨．     

基于XML的结构设计方法在武器器材管理中的应用

提出了基于标准XML、简化XML的编码结构设计方法并用于武器器材管理。该方法可方便实现不同武器器材的二维条码和电子标签结构设计,具有通用性和兼容性,可消除因编码结构不同而导致的“信息孤岛”效应,具有良好的扩展性和灵活性。