基于Virtools的洞库工程维护管理虚拟训练系统

为了解决洞库工程教学训练缺乏直观性和实践性的难题,利用Revit,Sketch Up和3D Max软件进行三维模型构建,以漫游中的基本图形变换和位置实时显示技术为例介绍了相关数学原理及Virtools编程实现过程,实现预定功能后发布了洞库工程维护管理虚拟训练系统。该虚拟训练系统具有功能演示、虚拟漫游、虚拟施工、维护管理虚拟训练和考核评估等功能,可以让学员身临其境地学习洞库工程维护管理的相关知识,有效地提高了教学效果。     

基于储备模式选择的战备物资分类研究

对战备物资进行分类是选择储备模式的基础和重要前提。把战备物资分类问题抽象为战备物资的军事性和经济性评价问题,设计了物资分类评价指标体系,并对部分指标进行了说明;利用层次分析法确定各指标的权重,运用专家打分法完成指标打分,并对专家打分程序进行优化,增强战备物资分类的可操作性,由军事性和经济性两方面的得分确定战备物资所属类别;最后通过算例证明了分类方法的有效性。     

常规潜艇改装潜水油船初探

从我国第一代常规潜艇现状出发,通过对改装的必要性、可行性论证及常规潜艇改装潜水油船技术潜力的分析,提出了常规潜艇改装潜水油船的建议和实施办法,并提出了潜水油船主要使命任务的设想．     

舰载光电装备技术在海军区域综合电子信息系统中的应用

阐述了海军区域综合电子信息系统的组成部分及其概念内涵．根据现代海战的基本特点,论证了现代海战对区域综合电子信息系统的作战需求,论述了光电装备技术在区域综合电子信息系统中的应用．     

舰船在斜浪中的稳性研究

应用累次近似法提出了一种斜浪中复原力臂的计算方法,对４型舰船作了大量的计算,其中包括波船相对位置、浪向角、波陡的变化对稳性的影响,最后得出复原力臂随之变化的规律．     

加过渡环的锥柱组合旋转壳的有限元应力分析与比较

对旋转组合壳体在轴对称静载荷作用下的强度计算,采用了性能良好的三节点曲线壳元,并采用整体坐标下位移和转角各自独立的插值函数推导有限元列式和编制计算机程序。经算例验证表明,上述单元和算法具有单元划分少、精度高、收敛性好的优点。对锥-锥-柱、锥-环-柱、锥-环-锥-环-柱等组合壳过渡区域最大弯矩值和应力值随结构参数变化情况进行了广泛的计算和对比分析,得出了一些有重要工程意义的新结论。     

发动机冷却水三维流动的实验研究

本文介绍了作者用实验方法研究发动机冷却水三维流动的若干成果,内容包括发动机冷却水腔模型的水流动实验台构成,流动显影、流速测量方法的应用与效果.该项实验结果为三维流场数值模拟方法的研究提供了重要依据,该顶成果为今后该领域的实验研究尊定了基础.     

装甲机械化部队面临高技术局部战争的挑战

本文通过对典型高技术条件下局部战争的分析,指出了装甲机械化部队所面临的挑战及应战的对策.     

Force chains based mesoscale simulation on the dynamic response of Al-PTFE granular composites

Force chains based mesoscale simulation is conducted to investigate the response behavior of aluminum-polytetrafluoroethylene (Al-PTFE) granular composites under a low-velocity impact. A two-dimensional model followed the randomly normal distribution of real Al particles size is developed. The dynamic compressive process of Al-PTFE composites with varied Al mass fraction is simulated and validated against the experiments. The results indicate that, force chains behavior governed by the number and the size of agglomerated Al particles, significantly affects the impact response of the material. The failure mode of the material evolves from shear failure of matrix to debonding failure of particles with increasing density. A high crack area of the material is critical mechanism to arouse the initiation re-action. The damage maintained by force chains during large plastic strain builds up more local stresses concentration to enhance a possible reaction performance. In addition, simulation is performed with identical mass fraction but various Al size distribution to explore the effects of size centralization and dispersion on the mechanical properties of materials. It is found that smaller sized Al particle of com-posites are more preferred than its bulky material in ultimate strength. Increasing dispersed degree is facilitated to create stable force chains in samples with comparable particle number. The simulation studies provide further insights into the plastic deformation, failure mechanism, and possible energy release capacity for Al-PTFE composites, which is helpful for further design and application of reactive materials.