Chain damage effects of multi-spaced plates by reactive jet impact

Chain damage is a new phenomenon that occurs when a reactive jet impacts and penetrates multi-spaced plates.The reactive jet produces mechanical perforations on the spaced plates by its kinetic energy(KE),and then results in unusual chain rupturing effects and excessive structural damage on the spaced plates by its deflagration reaction.In the present study,the chain damage behavior is initially demonstrated by experiments.The reactive liners,composed of 26 wt％Al and 74 wt％PTFE,are fabricated through a pressing and sintering process.Three reactive liner thicknesses of 0.08 CD,0.10 CD and 0.12 CD(charge diameter)are chosen to carry out the chain damage experiments.The results show a chain rupturing phenomenon caused by reactive jet.The constant reaction delay time and the different penetration velocities of reactive jets from liners with different thicknesses result in the variation of the deflagration position,which consequently determines the number of ruptured plates behind the armor.Then,the finite-element code AUTODYN-3D has been used to simulate the kinetic energy only-induced rupturing effects on plates,based on the mechanism of behind armor debris(BAD).The significant discrepancies between simulations and experiments indicate that one enhanced damage mechanism,the behind armor blast(BAB),has acted on the ruptured plates.Finally,a theoretical model is used to consider the BAB-induced enhancement,and the analysis shows that the rupturing area on aluminum plates depends strongly upon the KE only-induced pre-perforations,the mass of reactive materials,and the thickness of plates.     

水面舰艇"自助式"模拟训练环境生成研究

分析了当前水面舰艇战术背景条件下综合对抗模拟训练存在的主要不足,在此基础上,本文提出通过外接便携式计算机构建水面舰艇“自助式”模拟训练环境并验证了其可行性。提出了该模拟训练环境的基本功能、系统组成、工作流程;探讨了舰艇实装设备驱动、实时多任务仿真环境、舰艇机动过程仿真、训练过程重演等关键技术。这一方法有助于提高水面舰艇战术背景条件下综合对抗对抗模拟训练的有效性和针对性,具有较好的推广应用前景。     

单[6-脱氧（1，10癸二硫醇）巯基]β-环糊精的合成方法研究

制备合成单[6-脱氧（1,10癸二硫醇）巯基]β-环糊精,结合产物的。^1H NMR,^13C HMR分析,推测了可能的反应机理,初步讨论了其在制备传感器敏感膜材料方面的应用前景。     

CH2Cl2模拟剂扩散模型的建立及试验验证

研究分析了描述重气扩散过程的多种现有模型的特点,选择以浅层模型为基础,设计开发了CH2Cl2模拟弹爆炸扩散过程模拟分析的软件系统．通过与试验蛄果对比．表明了计算机模拟分析的有效性,为远距离红外检测系统提供了辅助技术基础．     

钢质油罐底板腐蚀概率估计

针对钢质油罐底板腐蚀,首先分析了油罐底板腐蚀工程检测数据的特点和腐蚀试验数据统计分析理论;然后针对工程检测信息不完全的特性,以最大腐蚀深度的预测估计为目标,建立了以轻微腐蚀面积估计来实现腐蚀概率修正估计的模型;最后利用广州等地27个罐约900条检测数据估计了油罐底板的最大腐蚀深度。其最大相对误差小于45%,约80%的相对误差优于30%。     

基于时空消耗法确定军事物流基地存储设施规模

存储设施是军事物流基地主要组成实体和有效运行载体,在规划军事物流基地时,需准确估算存储设施的规模。为寻求军事物流基地存储设施规模的定量计算方法,基于存储设施与所储物资应保持时空资源供需平衡的时空消耗原理,建立了存储设施规模数学模型。为提高模型的实用性,对模型中相关参数的具体作用和取值方法进行了解释和分析。最后以xx综合仓库改建xx军事物流基地为例具体说明了该模型的应用。     

Some aspects in estimating warranty and post‐warranty repair demands

When customers buy a product, they are often eligible for free repairs for a certain warranty period. In this article, we study some important aspects, which are often overlooked in the literature but are of interest to the manufacturer, in estimating both warranty and post‐warranty repair demands. We consider that the installed base of the product (i.e., the number of units of the product actually in use) varies with time due to both new sales and units being taken out of service. When estimating warranty and post‐warranty repair demands, we explicitly address the fact that customers may not always request repairs for failed units. For the case where the product failure time distribution is exponential, we derive the closed‐form expressions for both types of repair demands of a single unit and of the time‐varying installed base. The insights into some risk‐related quantities are also presented. Furthermore, the proposed model is extended by considering delayed warranty claims that are frequently seen in practice. Numerical examples illustrate that understanding both types of repair demands and the related decision variables is important for managing the obligatory and profitable repair services. © 2013 Wiley Periodicals, Inc. Naval Research Logistics 60: 499–511, 2013     

Investigation of the shock compression behaviors of Al/PTFE composites with experimental and a 3D mesoscale-model

The responses of AI/PTFE reactive materials (RMs) under shock compression were investigated by a single-stage gas gun.A 3D mesoscale-model was established based on micro-computed tomography(micro-CT) slice images and confirmed with experimental results.In the high-pressure stage,the com-posites reacted partially,whereas there were no deviations between the partially reacted Hugoniot and the inert simulation results.The simulation reveals that the Teflon matrix melting on the high shock pressure.Melts and decomposition of the PTFE accelerated the diffusion of the atoms.Thus,the reactions of the Al/PrFE composites are more like a combustion rather than a detonation.     

某型轰炸设备虚拟训练系统设计与实现

虚拟训练系统在场地、费效比、训练效果等方面具有明显的优势。设计了某型机载轰炸设备的虚拟训练系统,阐明了系统实现的关键技术,并实现了该系统。系统在对航空炸弹弹道模型进行解算的基础上,通过对座舱环境、轰炸设备和轰炸视景进行模拟和仿真,能够提供逼真的人机交互界面,从而达到帮助受训人员掌握轰炸程序,提高轰炸设备使用能力的目的。     

雷达信号仿真中箔条干扰回波模型研究

雷达信号仿真是抗干扰算法研究和验证的有效措施。针对箔条干扰随机信号模型难以满足高精度仿真的需要,本文在分析和总结箔条干扰散射特性和运动特性的基础上,对箔条干扰回波模型进行了更深入和精细化的研究。在Matlab平台上通过编程优化克服了复杂计算的问题,并获得了较好的模拟效果。仿真实验表明,该模型可为精确研究箔条干扰提供数据支持。