基于云重心方法的海战场环境评估

针对当前海战场环境评估方法存在的问题与不足,引入云理论对其进行科学评估。首先,对云模型和云重心的评判步骤进行阐述。然后,建立海战场环境的云模型和评价指标体系,算出加权偏离度θ。最后,将结果输入云发生器得出评价结果。实验结果表明,该方法简单易行,可操作性强,为海战场环境评估提供了一种较好的途径。     

Effects of total pressures and equivalence ratios on kerosene/air rotating detonation engines using a paralleling CE/SE method

In this paper, the kerosene/air rotating detonation engines(RDE) are numerically investigated, and the emphasis is laid on the effects of total pressures and equivalence ratios on the operation characteristics of RDE including the initiation, instabilities, and propulsive performance. A hybrid MPI + OpenMP parallel computing model is applied and it is proved to be able to obtain a more effective parallel performance on high performance computing(HPC) systems. A series of cases with the total pressure of 1 MPa, 1.5 MPa, 2 MPa, and the equivalence ratio of 0.9, 1, 1.4 are simulated. On one hand, the total pressure shows a significant impact on the instabilities of rotating detonation waves. The instability phenomenon is observed in cases with low total pressure (1 MPa) and weakened with the increase of the total pressure. The total pressure has a small impact on the detonation wave velocity and the specific impulse. On the other hand, the equivalence ratio shows a negligible influence on the instabilities, while it affects the ignition process and accounts for the detonation velocity deficit. It is more difficult to initiate rotating detonation waves directly in the lean fuel operation condition. Little difference was observed in the thrust with different equivalence ratios of 0.9, 1, and 1.4. The highest specific impulse was obtained in the lean fuel cases, which is around 2700 s. The findings could provide insights into the understanding of the operation characteristics of kerosene/air RDE.     

Delamination process in cross-ply UHMWPE laminates under ballistic penetration

Cross-ply unidirectional laminates made of ultra-high molecular weight polyethylene fibers are widely used as components of bullet-proof vests. To simulate the delamination process of the material under penetration, we constructed a numerical mechanical model, which was validated by tests using 7.62 × 39 mm rifle bullets penetrating laminates of different thicknesses. The results show that the delamination region is essentially diamond-shaped. The simulated delamination region is in good agreement with the experimental data. It is found that the delamination region increases with the compression modulus along the fiber direction. The delamination region increases when the shear strength between the fabric layers decreases;However, it is little influenced by the normal strength. The delamination region of the front face of the laminate is little influenced by the failure strain of the material and the initial velocity of the bullet. The delamination region of the back face increases with the failure strain and decreases with the initial velocity.     

Numerical and experimental study on the response characteristics of warhead in the fast cook-off process

The response characteristics of the warhead under thermal stimuli conditions are important to the safety improvement. The goal of this study is to obtain data on the warhead in the fast cook-off process. In this paper, a numerical calculation method is proposed, whose reliability is supported by comparison with experimental results. Through the numerical calculation, the temperature distribution, temperature change, and ignition time are acquired. The numerical results show that the ignition time is 76 s after the warhead started to burn and that the maximum temperature of the explosive's outer surface is 238.3 C at the ignition time. The fast cook-off experiment of the warhead is implemented so as to get the flame temperature and reaction grades that are not available through numerical calculation. The experimental results show that the overpressure fails to reach the preset minimum value which is equivalent to 6 kg of TNT and that the reaction grade is deflagration. The research results have reference value for the design of the warhead and the reduction of detonation risks.     

Hazard evaluation of ignition sensitivity and explosion severity for three typical MH2 (M＝Mg,Ti, Zr) of energetic materials

MgH2, TiH2, and ZrH2 are three typical metal hydrides that have been gradually applied to composite explosives and propellants as additives in recent years. To evaluate ignition sensitivity and explosion severity, the Hartmann device and spherical pressure vessel were used to test ignition energy and ex-plosion pressure, respectively. The results showed that the ignition sensitivity of ZrH2, TiH2 and MgH2 gradually increased. When the concentration of MgH2 is 83.0 g/m3 in Hartmann device, the ignition energy attained a minimum of 10.0 mJ. The explosion pressure of MgH2 were 1.44 times and 1.76 times that of TiH2 and ZrH2, respectively, and the explosion pressure rising rate were 3.97 times and 9.96 times that of TiH2 and ZrH2, respectively, through the spherical pressure vessel. It indicated that the reaction reactivity and reaction rate of MgH2 were higher than that of TiH2 and ZrH2. In addition, to conduct in-depth theoretical analysis of ignition sensitivity and explosion severity, gas production and combus-tion heat per unit mass of ZrH2, TiH2 and MgH2 were tested by mercury manometer and oxygen bomb calorimetry. The experimental results revealed that MgH2 had a relatively high gas production per unit mass (5.15 mL/g), while TiH2 and ZrH2 both had a gas production of less than 2.0 mL/g. Their thermal stability gradually increased, leading to a gradual increase in ignition energy. Furthermore, compared with theoretical combustion heat, the combustion ratio of MgH2, TiH2 and ZrH2 was more than 96.0%, with combustion heat value of 29.96, 20.94 and 12.22 MJ/kg, respectively, which was consistent with the explosion pressure and explosion severity test results.     

论赤壁之战敌对双方战争指导的优劣得失

发生在建安十三年(公元208年)的赤壁之战以其深远独特的影响、丰富多样的作战形式在三国乃至整个中国军事史上占据着不可替代的地位。它是一场典型的以弱胜强、以少胜多的战争,是一场囊括了野战、攻城、追击、遭遇、火攻、退却、水战等多种作战形式的战争,是中国历史上第一次在长江流域进行的大规模江河作战,同时又是中国历史上第一次企图通过江河作战而谋求实现统一而最终失败的战争。无论从大战略的高度来看,还是从军事战略的角度来分析,赤壁之战都是一场具有多种典型价值的战争。今天,我们分析战争敌对双方曹军与孙刘联军战争指导的优劣得失,仍能获得历史的经验与有益的启示。     

信息化战争中的纳米科技

纳米材料由于其独特的光、电、力、磁效应近年来受到人们广泛的关注,综述了目前国内外纳米科技的研究动态,着重介绍了现有纳米科技在高科技战争中的应用,及其潜在的发展方向．     

基于专家系统的防化保障预案评估研究

人工智能技术在众多领域获得广泛应用．为满足现代战争对防化指挥手段的现代化要求,针对不易量化的防化指挥决策问题的评估,提出了构建知识库并应用模糊推理机制建立专家系统,据此进行防化保障预案的评估选优方法,并对该方法的求解过程进行了探讨．     

毛细管末端凝胶推进剂液滴形成过程数值研究

要开展凝胶推进剂液滴燃烧特性的实验研究,必须首先形成凝胶推进剂液滴,在毛细管末端形成液滴是常用的液滴生成方法之一。为了揭示毛细管末端凝胶推进剂液滴的形成过程,求解了轴对称坐标系下的N-S方程,采用VOF(volume of fluid)方法捕捉液滴形成过程中气液交界面的演化规律,研究了无量纲液滴颈部直径DN/D0和无量纲液滴高度L/D0随时间的变化规律,并且与实验结果进行比较,验证了数值模型的可靠性。计算结果表明:在液滴形成过程中,液滴不是一直处于稳态;液滴颈部存在较大的剪切率,导致粘度下降,进而加快了颈部的断裂和自由液滴的形成;颈部断裂后,与液滴相连的部分迅速与液滴融合,出现很大的正向速度,而与毛细管末端相连的部分迅速收回,出现很大的负向速度。     

基于分布实时多Agent技术的防空兵群指挥决策研究

探讨了防空兵群指挥决策的重要地位,依据现代高技术条件下防空兵群作战指挥的决策支持需求,研究并设计了防空兵群作战指挥决策支持系统的基本结构,重点研究了系统的人-机交互技术,阐述了Agent的元模型,详细论述了基于Agent的分布实时群体联盟体系,并对Agent的通信语言ACL消息结构进行分析且应用于联盟体系的通信传输,为构建防空兵群作战指挥决策支持系统的人机交互子系统提供技术准备。