用状态空间法设计低灵敏度 SCFs 的研究

本文从双端接阻无源梯形结构出发,通过两次必要的换标,导出了一种新的完善的 SCFs 的状态空间综合方法。所得到的 SCFs 的状态空间矩阵集的一般形式具有低灵敏度,并且在特定频率下具有零灵敏度。     

CAN总线在柴油机并车监控系统中的应用研究

介绍了 CAN总线的技术特点 ,以基于 CAN总线的并车监控试验系统的研制为例 ,论述了新型 CAN总线网络式监控系统的软硬件配置方案、技术实现途径及其重要意义 ,展望了 CAN总线在自动化领域的广阔发展前景 .     

C~4ISR系统结构的网络分析

针对现代网络中心战中C~4ISR系统的特点,从复杂网络的角度,对C~4ISR系统结构进行了网络分析.采用基于多智能体的仿真方法,建立了两种C~4ISR系统的网络结构仿真模型,基于这些模型研究了不同网络结构下信息的失真率和延迟量.讨论了信息失真和延迟分别对集中式网络与分布式网络作战效能的影响.结果表明所提思路和方法是正确、有效的.     

Insensitive energetic microspheres DAAF/RDX fabricated by facile molecular self-assembly

Insensitive energetic materials are promising in the defense weapons field. However, energetic materials still suffer from great challenges and the concern about their safety limits their utilization. In this work, insensitive energetic explosive 3,3′-diamino-4,4′-azoxyfurazan/hexahydro-1,3,5-trinitro-1,3,5-triazine (DAAF/RDX) microspheres were fabricated by self-assembly method. Rod-like DAAF/RDX was prepared by mechanical ball milling for comparison. DAAF/RDX composites with different mass ratios (90:10, 80:20, and 70:30) were obtained. The morphologies and structures of as-obtained DAAF/RDX composites were characterized by scanning electron microscopy (SEM), powder x-ray diffraction (PXRD) and fourier transform infrared spectroscopy (FT-IR). The results showed that DAAF/RDX microspheres exhibited regular shaped microspheres with sizes from 0.5 to 1.2 μm. There was no crystal transition during the modification process. The thermal properties of as-obtained materials were then evaluated by differential scanning calorimetry (DSC) and materials studio software. DAAF/RDX microspheres showed an advanced decomposition peak temperature compared with rod-like DAAF/RDX. The binding energy and peak temperature values at zero β_i (T_P0) of DAAF/RDX (90:10) increased by 36.77 kJ/mol, 1.6 °C, and 58.11 kJ/mol, 12.3 °C compared to DAAF/RDX (80:20) and DAAF/RDX (70:30), indicating the better thermal stability of DAAF/RDX (90:10). The characteristic drop height (H₅₀) of DAAF/RDX (higher than 100 cm) composites was higher than that of raw RDX (25 cm), suggesting significant improvements in mechanical safety. The preparation of DAAF/RDX microspheres is promising for the desensitization of RDX and useful for the formation of other materials and future wide applications.     

Preparation and characterization of HMX/EVA/hBNNSs micro-composites with improved thermal stability and reduced sensitivity

Hexagonal boron nitride nanosheets(HBNNSs)have huge potential in the field of coating materials owing to their remarkable chemical stability,mechanical strength and thermal conductivity.Thin-layer hBNNSs were obtained by a liquid-phase exfoliation of h-BN powders and incorporated into EVA coatings for improving the safety performance of 1,3,5,7-tetranitro-1,3,5,7-tetrazocane(HMX).HBNNSs and ethylene-vinyl acetate copolymer(EVA)were introduced to HMX by a solvent-slurry process.For com-parison,the HMX/EVA and HMX/EVA/graphene(HMX/EVA/G)composites were also prepared by a similar process.The morphology,crystal form,surface element distribution,thermal decomposition property and impact sensitivity of HMX/EVA/hBNNSs composites were contrastively investigated.Results showed that as prepared HMX/EVA/hBNNSs composites were well coated with hBNNSs and EVA,and exhibited better thermal stability and lower impact sensitivity than that of HMX/EVA and HMX/EVA/G composites,suggesting superior performance of desensitization of hBNNSs in explosives.     

An experiment evaluating how the tiny mass eccentricities in spin-stabilized projectiles affect the position of impact points

This study investigates and quantifies some possible sources affecting the position of impact points of small caliber spin-stabilized projectiles (such as 12.7 mm bullets). A comparative experiment utilizing the control variable method was designed to figure out the influence of tiny eccentric centroids on the projectiles. The study critically analyzes data obtained from characteristic parameter measurements and precision trials. It also combines Sobol's algorithm with an artificial intelligence algorithm—Adaptive Neuro-Fuzzy Inference Systems (ANFIS)—in order to conduct global sensitivity analysis and determine which parameters were most influential. The results indicate that the impact points of projectiles with an entry angle of 0° deflected to the left to that of projectiles with an entry angle of 90°. The difference of the mean coordinates of impact points was about 12.61 cm at a target range of 200 m. Variance analysis indicated that the entry angle — i.e. the initial position of mass eccentricity — had a notable influence. After global sensitivity analysis, the significance of the effect of mass eccentricity was confirmed again and the most influential factors were determined to be the axial moment and transverse moment of inertia (Izz Iyy), the mass of a projectile (m), the distance between nose and center of mass along the symmetry axis for a projectile (Lm), and the eccentric distance of the centroid (Lr). The results imply that the control scheme by means of modifying mass center (moving mass or mass eccentricity) is promising for designing small-caliber spin-stabilized projectiles.     

Survivability assessment of spacecraft impacted by orbit debris

To help optimize the spacecraft design and reduce the risk of spacecraft mission failure, a new approach to assess the survivability of spacecraft in orbit is presented here, including the following three steps:1) Sensitivity Analysis of spacecraft. A new sensitivity analysis method, a ray method based on virtual outer wall, is presented here. Using rays to simulate the debris cloud can effectively address the component shadowing issues. 2) Component Vulnerability analysis of spacecraft. A function"Component functional reduction degree — Component physical damage degree"is provided here to clearly describe the component functional reduction. 3) System-level Survivability Assessment of spacecraft. A new method based on expert knowledge reasoning, instead of traditional artificial failure tree method, is presented here to greatly improve the efficiency and accuracy of calculation.     

基于TensorFlow的四旋翼无人机着陆地标识别

针对多旋翼无人机在无人干预情况下的自主着陆问题,提出一种基于迁移学习的地面标识图像检测方法.该方法基于TensorFlow深度学习框架,使用迁移学习技术在地面标识数据集上重新训练Inception-v3模型以构建新的地面标识识别模型.以四旋翼无人机为例,将其拍摄的着陆坪图片与其他地面标识图片作为训练集输入神经网络,通过多次训练校正神经网络参数.实验结果表明,基于迁移学习的四旋翼无人机着陆地标识别比直接基于In-ception-v3模型的识别效果要好得多,在仅有数千张训练图片的情况下,测试准确率超过90％.在Windows下训练、测试的模型可移植到树莓派3B上,完成了基于Python和TensorFlow开发的程序在不同操作系统下运行的验证工作.     

PC2－5柴油机舰员级维修需求卡（PCSM）的研制与使用

本文总结了郑和号训练舰主动力推进装置舰员级维修需求卡ＰＣＳＭ的研制过程和经验,阐述了ＰＣＳＭ的组成和使用方法,对提高我军舰船维修理论水平和维修实践具有重要指导意义。     

AC—DC变换技术的进展与展望

本文回顾了电力电子技术在ＡＣ—ＤＣ变换方面的进展,分析了已提出的技术的特点．并展望了该领域进一步研究的趋势。