牢牢把握国防和军队建设的主题和主线

牢牢把握国防和军队建设的主题和主线,充分体现了国防和军队建设又好又快发展的内在要求;对实现国防和军队建设"十二五"目标任务具有决定性意义;必须把握主题和主线,进一步推进国防和军队建设科学发展创新发展.     

积极运用网络开展思想政治教育

网络思想政治教育必须以加强基层部队政治教育网络建设、科学设置思想政治教育内容、打造思想交流互动平台、建立网络政治教育工作评价考核体系为着力点,并处理好"趋利"与"避害"、互联网与军队内部网、自我教育与网络教育、硬件建设与软件建设的关系.     

找准深化军队学习型党组织建设的着眼点

深化军队学习型党组织建设,需要进一步找准着眼点.要求着眼党的管理模式的创新,着眼研究问题解决问题,着眼提高党员特别是党员领导干部的能力素质,着眼实现组织化学习与自觉化学习相统一,不断深化军队学习型党组织建设,进而有效推动军队党的建设科学化.     

Single machine parallel batch scheduling subject to precedence constraints

We consider the single machine parallel batch scheduling problems to minimize makespan and total completion time, respectively, under precedence relations. The complexities of these two problems are reported as open in the literature. In this paper, we settle these open questions by showing that both problems are strongly NP‐hard, even when the precedence relations are chains. When the processing times of jobs are directly agreeable or inversely agreeable with the precedence relations, there is an O(n²) time algorithm to minimize the makespan. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

大型模拟对抗演习回放系统设计

针对大型模拟对抗演习的实际需要,提出了大型模拟对抗演习辅助讲评系统,对其子系统回放系统进行了重点设计。在分析系统功能的基础上,阐述了系统数据流程和可视化表现模式,论述了系统实现的关键技术,最终实现了回放系统。该系统通过对大型模拟对抗演习过程中产生的大量历史数据进行回放或展示,能够在演习结束或者阶段结束后辅助导演部或指挥员对演习过程作出全面客观的评价,从而达到帮助参演人员对演习过程进行分析评估、查找问题、总结经验和教训的目的。     

精密坐标镗床CNC系统研究

介绍了作者研制的通用ＣＮＣ系统,该系统以ＡＳＴ３８６作为控制器,采用ＰＷＭ驱动直流伺服电机,并配以软、硬件接口;文中对该系统的主要组成部分作了分析,在此基础上应用传统的ＰＩＤ控制方法设计数字控制器;最后通过实验验证了该系统的输出响应和控制器的性能。     

Research on the influences of confining pressure and strain rate on NEPE propellant: Experimental assessment and constitutive model

In order to study the influences of confining pressure and strain rate on the mechanical properties of the Nitrate Ester Plasticized Polyether (NEPE) propellant, uniaxial tensile tests were conducted using the self-made confining pressure system and material testing machine. The stress-strain responses of the NEPE propellant under different confining pressure conditions and strain rates were obtained and analyzed. The results show that confining pressure and strain rate have a remarkably influence on the mechanical responses of the NEPE propellant. As confining pressure increases (from 0 to 5.4 MPa), the maximum tensile stress and ultimate strain increase gradually. With the coupled effects of confining pressure and strain rate, the value of the maximum tensile stress and ultimate strain at 5.4 MPa and 0.0667 s⁻¹ is 2.03 times and 2.19 times of their values under 0 MPa and 0.00333 s⁻¹, respectively. Afterwards, the influence mechanism of confining pressure on the NEPE propellant was analyzed. Finally, based on the viscoelastic theory and continuous damage theory, a nonlinear constitutive model considering confining pressure and strain rate was developed. The damage was considered to be rate-dependent and pressure-dependent. The constitutive model was validated by comparing experimental data with predictions of the constitutive model. The whole maximum stress errors of the model predictions are lower than 4% and the corresponding strain errors are lower than 7%. The results show that confining pressure can suppress the damage initiation and evolution of the NEPE propellant and the nonlinear constitutive model can describe the mechanical responses of the NEPE propellant under various confining pressure conditions and strain rates. This research can lay a theoretical foundation for analyzing the structural integrity of propellant grain accurately under working pressure loading.     

Hypersonic impact flash characteristics of a long-rod projectile collision with a thin plate target

Impact flash occurs when objects collide at supersonic speeds and can be used for real-time damage assessment when weapons rely on kinetic energy to destroy targets.However,the mechanism of impact flash remains unclear.A series of impact flash experiments of flat-head long-rod projectiles impacting thin target plates were performed with a two-stage light gas gun.The impact flash spectra for 6061 aluminum at 1.3-3.2 km/s collision speeds were recorded with a high-speed camera,a photoelectric sensor,and a time-resolved spectrometer.The intensity of the impact flash exhibited a pulse charac-teristic with time.The intensity(I)increased with impact velocity(V0)according to I∝Vn0,where n = 4.41 for V0 ＞ 2 km/s.However,for V0 ＜ 2 km/s,n = 2.21,and the intense flash duration is an order of magnitude less than that of higher V0.When V0 ＞ 2 km/s,a continuous spectrum(thermal radiation background)was observed and increased in intensity with V0.However,for V0 ＜ 2 km/s,only atomic line spectra were detected.There was no aluminum spectral lines for V0 ＜ 2 km/s,which indicated that it had not been vaporized.The initial intense flash was emission from excited and ionized ambient gases near the impact surface,and had little relationship with shock temperature rise,indicating a new mechanism of impact flash.     

Shock-induced reaction behaviors of functionally graded reactive material

In this paper, the ballistic impact experiments, including impact test chamber and impact double-spaced plates, were conducted to study the reaction behaviors of a novel functionally graded reactive material (FGRM), which was composed of polytetrafluoroethylene/aluminum (PTFE/Al) and PTFE/Al/bismuth trioxide (Bi₂O₃). The experiments showed that the impact direction of the FGRM had a significant effect on the reaction. With the same impact velocity, when the first impact material was PTFE/Al/Bi₂O₃, compared with first impact material PTFE/Al, the FGRM induced higher overpressure in the test chamber and larger damaged area of double-spaced plates. The theoretical model, which considered the shock wave generation and propagation, the effect of the shock wave on reaction efficiency, and penetration behaviors, was developed to analyze the reaction behaviors of the FGRM. The model predicted first impact material of the FGRM with a higher shock impedance was conducive to the reaction of reactive materials. The conclusion of this study provides significant information about the design and application of reactive materials.     

Research progress on advanced rail materials for electromagnetic railgun technology

Electromagnetic railgun attracts more and more attention due to its advantage in speed,cost,and obscurity.It is found that the rail should withstand huge mechanical and thermal shocks during the launching operation.The forms of rail failure are accompanied by gouge,grooving,transition,and arc ablation,etc.The service life of the rail has become a bottleneck restricting the development of elec-tromagnetic railgun technology.A series of researches are carried out to solve rail failure,including analysing the failure mechanism and using various advanced rail materials.This paper provides a comprehensive review of rail materials,including material composition,preparation,microstructure,and properties.We begin from a short background of the requirement of the rail material.Then a detailed investigation of rail materials is described,and the performances of those materials are introduced.Finally,further development prospect of rail material is discussed.