基于单发地空导弹测试数据的武器精度检验

在地空导弹命中精度检验问题中,提出了充分利用单发导弹的测试数据进行命中精度的检验。该思想是利用χ2检验法对导弹速度的瞬时误差（系统误差）的方差进行检验,并给出了在测出导弹7、9、11个轨迹点条件下的2类风险临界值表,为武器精度检验提供了一定依据。     

基于下方近场平面磁场的潜艇高空磁场计算方法

潜艇高空磁场一般由包络面磁场计算得到,但实际中包络面磁场较难测量,而下方近场平面磁场则容易获得.在下方近场平面磁场的基础上,利用边界积分法计算得到下方远场磁场,再根据潜艇远场磁场分布的全空间一致性,计算出远场等效磁矩,得到高空远场磁场.实验分析表明了潜艇远场磁场分布的全空间一致性,由下方近场平面磁场可以较准确地得到潜艇...     

中远程空空导弹目标截获概率仿真计算

分析了影响中远程复合制导空空导弹截获目标的主要因素,建立了捷联惯导误差模型、载机雷达观测误差模型、雷达导引头误差模型等,提出了用蒙特卡洛法的方法计算截获概率,并给出仿真实例.仿真结果表明了模型和算法的有效性和实用性,为分析捷联惯导、载机雷达等对目标截获概率的影响提供了方法和支持.     

美军战术级指挥信息系统界面设计的发展及启示

战术级指挥信息系统(T-C4ISR系统)是指挥控制师或师以下部队遂行战术任务的信息平台.围绕T-C4ISR系统用户界面设计相关问题展开如下研究:通过智能化战争条件下T-C4ISR系统界面应具有的新特点引入,首先介绍了美军T-C4ISR系统界面设计理论的演变;结合美军RAPTOR系统,介绍了生态界面设计理论的主要内容和应用;分析了生态界面设计理论对我军T-C4ISR系统建设的一些启示,并展望了下一步可以开展的主要工作.     

考虑腐蚀因素的船体结构寿命预测方法

为建立考虑腐蚀因素的船体结构寿命预测方法,在分析现有常用的船体结构腐蚀损伤时变模型的基础上,根据舰船维修保障实际情况建立了考虑腐蚀防护系统作用时间和维修时间等因素的腐蚀时变模型。根据相关规范选择了船体结构腐蚀寿命标准,并建立了一种计算船体结构腐蚀寿命的方法。该方法建立了船体结构腐蚀寿命与腐蚀防护系统作用时间和修理时间等因素之间的量化关系,可以用于预测均匀腐蚀条件下船体结构寿命,也可以反过来指导腐蚀防护系统设计指标的选择和船体结构维修策略的确定。     

大功率IGBT器件及其组合多时间尺度动力学表征研究综述

在提出电力电子器件及其组合多时间尺度动力学表征需求的前提下,以目前常用的全控型电力电子器件——绝缘栅双极晶体管(Insulated Gate Bipolar Transistor,IGBT)为例,系统分析并归纳了目前在IGBT及其组合多时间尺度动力学表征研究方面的进展和成果,包括作为基础的大功率IGBT及其组合多时间尺度电热瞬态建模方法、基于模型的大功率IGBT模块失效量化表征方法以及用于辅助分析的IGBT组合多速率仿真方法。此外,介绍了基于IGBT多时间尺度模型的装置应用设计案例。从建模方法、可靠性评估、仿真手段以及应用设计四个方面系统全面地阐述了大功率IGBT及其组合多时间尺度的动力学表征方法,可为电力电子混杂系统的精确设计提供电力电子器件层面的理论和技术支撑。     

Study of high-speed-impact-induced conoidal fracture of Ti alloy layer in composite armor plate composed of Ti-and Al-alloy layers

In order to understand the mechanism of conoidal fracture damage caused by a high-speed fragment-simulating projectile in titanium alloy layer of a composite armor plate composed of titanium- and aluminum-alloy layers, the ballistic interaction process was successfully simulated based on the Tuler-Butcher and GISSMO coupling failure model. The simulated conoidal fracture morphology was in good agreement with the three-dimensional industrial-computed-tomography image. Further, three main damage zones (zones I, II, and III) were identified besides the crater area, which are located respectively near the crater area, at the back of the target plate, and directly below the crater area. Under the high-speed-impact conditions, in zone II, cracks began to form at the end of the period of crack formation in zone I, but crack formation in zone III started before the end of crack formation in zone II. Further, the damage mechanism differed for different stress states. The microcracks in zone I were formed both by void connection and shear deformation. In the formation of zone I, the stress triaxiality ranged from-2.0 to-1.0, and the shear failure mechanism played a dominant role. The microcracks in zone II showed the combined features of shear deformation and void connection, and during the for-mation process, the stress triaxiality was between 0 and 0.5 with a mixed failure mode. Further, the microcracks in zone III showed obvious characteristics of void connection caused by local melting. During the zone III formation, the triaxiality was 1.0-1.9, and the ductile fracture mechanism was dominant, which also reflects the phenomenon of spallation.     

Irreversible demagnetization mechanism of permanent magnets during electromagnetic buffering

The permanent magnets will be irreversibly demagnetized under high temperature and high velocity during the electromagnetic buffering. In this study, the magnetic field induced by eddy currents and the self-demagnetizing field of permanent magnet are taken into consideration together for demagnetiza-tion analyse. The magnetic Reynolds number is used to express the eddy currents demagnetization. The correction coefficient being expressed as the index of the air-gap width, the inner cylinder thickness, iron pole axial length and the permanent magnet demagnetization coefficient is introduced by magnetic path analysis to represent the self-demagnetization effect and the demagnetization extent. The electromag-netic buffer (EMB) prototype is tested under intensive impact loads of different strengths at room temperature. The accuracy of the nonlinear irreversible demagnetization finite element model is verified by demagnetization on damping force, velocity and displacement. Finally, high-velocity demagnetization and high-temperature demagnetization are analysed in order to obtain the distribution law of irre-versible demagnetization.     

【专题】智能化导弹质量检测方法研究

导弹是由各种类型装备组成的综合性很强的复杂系统,智能技术的引入进一步丰富了智能导弹质量特性的内涵,对质量检测和控制提出了更高要求,需要开发与之相适应的检测方法。本文先给出了智能导弹的定义和内涵,分析了其智能特性,接着概述了智能化导弹的结构组成,分析了各智能部件的功能和结构组成,从智能化导弹结构组成及测试参数、智能化部件的嵌入式软件作用、零部件机械加工精度等方面提出了智能化导弹质量检测的需求,并在此基础上结合智能化制造等技术提出了在线检测、自动检测/测试、BIT自检、软件测评技术以及弹载遥测的智能化导弹质量检测途径和方法。     

基于改进DDPG的空战行为决策方法

针对空战中飞机如何根据实时态势进行快速智能决策问题,提出基于改进DDPG算法的空战行为决策框架(Air Combat Behavior Decision-making Framework on Improve DDPG,ACBDF_DDPG).框架中的主要改进如下:1.设计一种针对动态目标的嵌入式人工经验奖励机制,缓解...