现代防空体系中三层作战问题研究

对现代防空体系中三道防线的基本概念和三层作战的任务区分进行了讨论,然后围绕如何对现代防空作战做三层部署展开了论述。首先概述了第一层作战中远程破击的必要性并进一步提出了抗击预警机的主要战法,然后在关于第二层作战问题上重点通过数学建模的方法,对地空导弹距离保卫目标的最佳配置距离进行了研究,最后对第三层作战防空兵作战部署形式及方法进行了讨论,为指挥员进行正确战斗部署提供了一定的参考。     

摧毁固定目标的空袭兵器需求量算法研究

在反空袭作战中,预先对敌空袭兵器的出动量的有效判断程度,关系到我防空兵器的兵力需求论证与战斗部署。以往这方面的研究成果中,定性多于定量,为提高准确性,加强定量研究有很大的必要。由于影响作战的因素很多,且需求量的计算分为多个方面,不可能一一作出研究。分析了敌空袭固定目标时兵力选择所依据的因素,分别用排队论与Lanchester方程理论进行了数学建模。     

燃烧型焊条焊接A3钢的研究

基于燃烧合成技术的燃烧机理,结合焊接母材的材质,制备可用于手工施焊的燃烧型焊条焊接A3钢。对焊接试件进行力学性能测试和金相分析,结果表明:焊接试件的结合方式为冶金结合,焊缝合金在细晶强化和弥散强化的作用下,试件的抗拉强度(σb)达到370 MPa,抗弯强度(σf)达到1 100 MPa,成功实现了燃烧型焊条对A3钢的焊接。     

一种新的装备配置优化模型

传统的装备配置优化问题一般采用确定性的数学规划方法解决,难以满足高技术条件下现代战争中需要对大量随机现象和模糊现象进行精确定量分析的实际要求。在分析了高技术条件下装备配置问题一般特性的基础上,根据机会约束规划和模糊机会约束规划的思想,提出了一种新的建立装备配置优化模型的思路和方法,并给出了基于随机模拟的遗传算法的实值算例,算例结果与实际情况基本相符,反映了模型的科学性与实用性。     

反正弦函数教法的探讨

反三角函数的教学,重点应放在反正弦函数,抓住反正弦函数定义的由来,形成鲜明的概念,就容易理解其定义、定义域、值域和性质,并会应用公式进行三角运算。     

XNAV中的相对论效应（Ⅰ）一引力频移和Doppler频移

详细讨论了XNAV(X射线源自主导航)中的广义相对论效应之一：脉冲星发射与观测者接收到X射线的引力频移和Doppler频移。在太阳质心系的1PN和2PN度规下,计算出引力和Doppler频移产生的时间误差,所得结论是对现行公式的修正。     

Shock-induced reaction behaviors of functionally graded reactive material

In this paper, the ballistic impact experiments, including impact test chamber and impact double-spaced plates, were conducted to study the reaction behaviors of a novel functionally graded reactive material (FGRM), which was composed of polytetrafluoroethylene/aluminum (PTFE/Al) and PTFE/Al/bismuth trioxide (Bi₂O₃). The experiments showed that the impact direction of the FGRM had a significant effect on the reaction. With the same impact velocity, when the first impact material was PTFE/Al/Bi₂O₃, compared with first impact material PTFE/Al, the FGRM induced higher overpressure in the test chamber and larger damaged area of double-spaced plates. The theoretical model, which considered the shock wave generation and propagation, the effect of the shock wave on reaction efficiency, and penetration behaviors, was developed to analyze the reaction behaviors of the FGRM. The model predicted first impact material of the FGRM with a higher shock impedance was conducive to the reaction of reactive materials. The conclusion of this study provides significant information about the design and application of reactive materials.     

Research progress on advanced rail materials for electromagnetic railgun technology

Electromagnetic railgun attracts more and more attention due to its advantage in speed,cost,and obscurity.It is found that the rail should withstand huge mechanical and thermal shocks during the launching operation.The forms of rail failure are accompanied by gouge,grooving,transition,and arc ablation,etc.The service life of the rail has become a bottleneck restricting the development of elec-tromagnetic railgun technology.A series of researches are carried out to solve rail failure,including analysing the failure mechanism and using various advanced rail materials.This paper provides a comprehensive review of rail materials,including material composition,preparation,microstructure,and properties.We begin from a short background of the requirement of the rail material.Then a detailed investigation of rail materials is described,and the performances of those materials are introduced.Finally,further development prospect of rail material is discussed.     

Adaptive control of track tension estimation using radial basis function neural network

Track tension is a major factor influencing the reliability of a track. In order to reduce the risk of track peel-off, it is necessary to keep track tension constant. However, it is difficult to measure the dynamic tension during off-road operation. Based on the analysis of the relation and external forces depending on free body diagrams of the idler, idler arm, road wheel and road arm, a theoretical estimation model of track tension is built. Comparing estimation results with multibody dynamics simulation results, the rationality of track tension monitor is validated. By the aid of this monitor, a track tension control system is designed, which includes a self-tuning proportional-integral-derivative (PID) controller based on radial basis function neural network, an electro-hydraulic servo system and an idler arm. The tightness of track can be adjusted by turning the idler arm. Simulation results of the vehicle starting process indicate that the controller can reach different expected tensions quickly and accurately. Compared with a traditional PID controller, the proposed controller has a stronger anti-disturbance ability by amending control pa-rameters online.     

基于多元高斯概率分布的无线局域网定位方法研究

针对无线局域网环境及室内目标定位需求,研究了基于接收信号强度指示的定位技术,提出了一种基于多元高斯概率分布的信号强度模式匹配方法,讨论了定位系统框架。试验结果表明,该方法具有较好的室内定位效果。