CAD/CAM中造型技术和发展趋势

造型技术是CAD/CAM的核心技术。本文较详细地介绍了几何造型、壳体造型及特征造型的理论与算法,分析了各种造型方法及形体表示方法的优缺点,最后探讨了造型技术的发展趋势。     

一种基于细胞动力学的双目匹配方法

双目匹配是计算机立体视觉的一个难点。以往的各种模型把注意力集中于将左视图像和右视图像中的要素特征唯一地进行双目匹配的任务上。有别于以往的这些模型，文章在ＦＡＣＡＤＥ模型框架的基础上，利用细胞动力学模型隐含了竞争和合作这一原理，实现了一个采用“方位合作，视差竞争”方法的双目匹配模型，从而探索一条利用生物视觉原理进行计算机立体视觉研究的可行途径。     

可变形定向破片战斗部模型试验和数值模拟研究

基于可变形定向破片战斗部的作用原理,设计了试验结构模型,并对其进行了静爆试验研究。根据试验结果,建立了有限元分析模型,利用LS-DYNA程序对可变形定向战斗部变形过程以及破片的飞散过程进行了数值模拟。结果表明,在目标方向破片密度和速度都有较大幅度增益,数值模拟与试验结果比较吻合。     

Energy‐efficient scheduling for sustainable manufacturing systems with renewable energy resources

Environmentally friendly energy resources open a new opportunity to tackle the problem of energy security and climate change arising from wide use of fossil fuels. This paper focuses on optimizing the allocation of the energy generated by the renewable energy system to minimize the total electricity cost for sustainable manufacturing systems under time‐of‐use tariff by clipping the peak demand. A rolling horizon approach is adopted to handle the uncertainty caused by the weather change. A nonlinear mathematical programming model is established for each decision epoch based on the predicted energy generation and the probability distribution of power demand in the manufacturing plant. The objective function of the model is shown to be convex, Lipchitz‐continuous, and subdifferentiable. A generalized benders decomposition method based on the primal‐dual subgradient descent algorithm is proposed to solve the model. A series of numerical experiments is conducted to show the effectiveness of the solution approach and the significant benefits of using the renewable energy resources.     

爆炸逻辑间隙零门实验研究

为了可靠实现爆炸逻辑间隙零门的原理功能,提出并验证了一种基于精细RDX和含能胶合剂的传爆药方案.通过实验探索了基于该传爆药的爆炸零门适用的间隙宽度范围,并设计了一种小尺寸爆炸逻辑间隙零门,为爆炸逻辑网络设计提供参考.     

着力从六个方面提高学术期刊质量

学术期刊以刊发学术论文为主。由于近年来各类高校对教师职称评定,硕士、博士研究生毕业获得学位等,均有在学术期刊发表文章数量的硬性要求,使得各类学术期刊的发展速度普遍较快。但是,受各种因素的影响,学术期刊的质量却有所下降,令人担忧。必须着力从六个方面入手提高学术期刊的质量,增加其品牌竞争力。     

Alleviating time inconsistent behaviors via a competition scheme

Under quasi‐hyperbolic discounting, the valuation of a payoff falls relatively rapidly for earlier delay periods, but then falls more slowly for longer delay periods. When the salespersons with quasi‐hyperbolic discounting consider the product sale problem, they would exert less effort than their early plan, thus resulting in losses of future profit. We propose a winner‐takes‐all competition to alleviate the above time inconsistent behaviors of the salespersons, and allow the company to maximize its revenue by choosing an optimal bonus. To evaluate the effects of the competition scheme, we define the group time inconsistency degree of the salespersons, which measures the consequence of time inconsistent behaviors, and two welfare measures, the group welfare of the salespersons and the company revenue. We show that the competition always improves the group welfare and the company revenue as long as the company chooses to run the competition in the first place. However, the effect on group time inconsistency degree is mixed. When the optimal bonus is moderate (extreme high), the competition motivates (over‐motivates) the salesperson to work hard, thus alleviates (worsens) the time inconsistent behaviors. © 2017 Wiley Periodicals, Inc. Naval Research Logistics 64: 357–372, 2017     

基于ICA的油库阀门内漏声发射定量检测

基于声发射原理的阀门内漏检测作为一种动态无损检测方法得到了广泛应用,但是定量检测一直是研究难点。现有的内漏率定量检测模型计算方法因参数不易测定,导致计算困难,精度不高。采用独立分量分析(ICA)方法提取声发射信号特征向量,并与参考样本集的特征向量相比较,相似程度最高的即可作为待测阀门的内漏率。内漏模拟实验分别将常规参数、频谱成分和ICA提取特征作为特征向量进行比较,结果表明ICA提取的特征向量维数为15时,均方根误差可以达到0.01 L/min,能够满足工程检测需要。     

一个二阶精度的大粒子有限体积方法

对二维Euler方程给出一个二阶精度的非结构网格有限体积方法,方法的主要思想是把Euler方程的一个时间步分两步计算:第一步只考虑压力加速效应,第二步再考虑输运效应,离散过程中采用一种具有最小二乘思想的线性重构函数以计算交界面的流通量,数值实验表明该方法是非常有效的。     

装备可持续发展能力量化分析——从资源环境约束的视角

将资源环境约束视为装备可持续发展的阻力,从资源约束与环境约束2个方面建立了装备可持续发展能力的度量模型。采用因素分解法将资源约束与环境约束的影响因素逐层分解细化,得到了衡量资源约束与环境约束程度的指标体系;采用幂权重法将各级影响因素自底向上汇总,实现了对装备可持续发展能力的度量;并通过算例验证了度量模型的适用性。研究结果可为装备可持续发展量化分析提供方法支撑。