Value management of diagnostic equipment with cancelation,no‐show,and emergency patients

Magnetic resonance imaging and other multifunctional diagnostic facilities, which are considered as scarce resources of hospitals, typically provide services to patients with different medical needs. This article examines the admission policies during the appointment management of such facilities. We consider two categories of patients: regular patients who are scheduled in advance through an appointment system and emergency patients with randomly generated demands during the workday that must be served as soon as possible. According to the actual medical needs of patients, regular patients are segmented into multiple classes with different cancelation rates, no‐show probabilities, unit value contributions, and average service times. Management makes admission decisions on whether or not to accept a service request from a regular patient during the booking horizon to improve the overall value that could be generated during the workday. The decisions should be made by considering the cancelation and no‐show behavior of booked patients as well as the emergency patients that would have to be served because any overtime service would lead to higher costs. We studied the optimal admission decision using a continuous‐time discrete‐state dynamic programming model. Identifying an optimal policy for this discrete model is analytically intractable and numerically inefficient because the state is multidimensional and infinite. We propose to study a deterministic counterpart of the problem (i.e., the fluid control problem) and to develop a time‐based fluid policy that is shown to be asymptotically optimal for large‐scale problems. Furthermore, we propose to adopt a mixed fluid policy that is developed based on the information obtained from the fluid control problem. Numerical experiments demonstrate that this improved policy works effectively for small‐scale problems. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 287–304, 2016     

导弹突防后弹道机动调整策略强化学习

针对弹道导弹中段突防后飞行弹道与标准弹道产生较大偏离的弹道机动调整问题,建立了机动调整时机策略最优化模型。设计了机动调整逆序Q学习算法,采用Tile coding逼近器编码状态特征空间,并对其进行线性逼近。构建了Q学习算法与蒙特卡罗方法相结合的逆序更新策略机制,以对导弹机动调整最优时机进行训练。仿真测试分析结果表明,在给定场景参数下,通过10 000代强化学习算法训练得到的策略能够可靠地使用最少机动次数控制导弹突防后飞行弹道的调整决策,验证了方法的有效性。     

分层土中桩筏基础荷载分担

结合一个桩筏联合基础的设计过程,探讨了在复杂地基土上基础设计中的受力分析及变形协调计算过程.介绍了在满足复合地基承载力和变形要求前提下合理布置桩筏联合基础的做法及其设计思路.布置桩筏联合基础时使桩筏分别落在不同土层上,以充分利用不同深度地基土的承载力;另外针对桩下为非淤泥系硬土层,应最大限度利用桩身强度和天然地基承载力.该做法可以取得很好的经济效益,可供工程设计人员参考.     

片上trace：嵌入式处理器的有效调试和优化技术

片上trace技术弥补了传统调试方法的不足,可以实现对嵌入式软件的非入侵调试.首先分析了当前主流调试方法的不足,论述了trace与断点调试方法互为补充的关系,而后介绍了YHFT系列DSP的片上trace系统TraceDo的功能与结构,并解释了路径trace的原理和工作过程,最后讨论了片上trace的应用.     

方位/多普勒频率联合单站无源定位方法

在传统的无源定位技术基础之上,采用增加观测信息量的方法来实现单站无源定位,即方位/多普勒频率联合定位技术.该方法通过测量得到的多普勒频率提取目标的径向速度信息,再结合测角系统所测得的方位信息对目标进行定位.在对其定位原理分析讨论之后予以实现,最后通过计算机仿真实验证明这种定位算法具有较高的定位精度.     

C2组织结构的鲁棒性设计方法

介绍了C2(Command and Control)组织和C2组织结构,讨论了C2组织结构的鲁棒性设计问题.提出了基于粒度计算的鲁棒性组织结构设计方法,设计过程包括两个阶段:平台集粒化阶段和决策分层阶段,并给出了基于遗传算法的平台集粒化方法和鲁棒性组织结构的决策树优化模型.案例分析和对比试验表明方法具有较好的性能.     

基于PowerBuilder的装备通用调拨模块的设计与实现

分析了军械管理信息系统中调拨功能的特点,探讨了基于PowerBuilder的装备通用调拨模块的设计方法和实现技术,并在实际工程中验证了其有效性。     

一种带限信号重建和外推的方法

讨论一种新的高频重建的数值方法。此方法包括三步:首先将问题用傅立叶变换到频域;其次,用Tikhonov正则化方法求问题的正则解;最后用傅立叶反变换变回时域。它能充分利用卷积型积分方程的特性,计算复杂度低。文中给出算法,证明收敛性;还给出计算机实验结果。     

涡流阀流量调节特性数值模拟

用数值模拟研究了涡流阀的流量调节特性。在来流总压恒定的条件下,用时间相关法求解了雷诺平均的Ｎａｖｉｅｒ—Ｓｔｏｋｅｓ方程。计算了无控制流和有控制流两种情况,得到了流动参数在流场中的分布和控制流量与喷管流量的关系。计算表明,涡流阀有良好的流量调节特性。     

取值于p型Banach 空间随机变量列的收敛性

本文将Ｗ．Ｆ．Ｓｔｏｕｔ［１］关于实值随机变量列的收敛性的一些结果,推广到了ｐ型Ｂａｎａｃｈ空间值情形上,得到了刻划ｐ型Ｂａｎａｃｈ空间的二个充分必要条件及二个必要条件