相依网络研究综述

网络相依性和相依网络研究已经成为近年来复杂网络领域的热点,但是目前对相关研究进展进行综合归纳的文献却不多见。在对国内外相关文献进行系统分析的基础上,简要介绍相依网络研究涉及的渗流理论;描述该类型网络的级联失效过程;从相依网络的子网络特性、相依边的方向和类型、子网络组合方式等三个角度对相依网络鲁棒性的研究成果进行总结;并从理论和应用两方面对未来相依网络研究的发展方向进行展望。     

Nonperiodic preventive maintenance for repairable systems

As a complex system with multiple components usually deteriorates with age, preventive maintenance (PM) is often performed to keep the system functioning in a good state to prolong its effective age. In this study, a nonhomogeneous Poisson process with a power law failure intensity is used to describe the deterioration of a repairable system, and the optimal nonperiodic PM schedule can be determined to minimize the expected total cost per unit time. However, since the determination of such optimal PM policies may involve numerous uncertainties, which typically make the analyses difficult to perform because of the scarcity of data, a Bayesian decision model, which utilizes all available information effectively, is also proposed for determining the optimal PM strategies. A numerical example with a real failure data set is used to illustrate the effectiveness of the proposed approach. The results show that the optimal schedules derived by Bayesian approach are relatively more conservative than that for non‐Bayesian approach because of the uncertainty of the intensity function, and if the intensity function are updated using the collected data set, which indicates more severe deterioration than the prior belief, replacing the entire system instead of frequent PM activities before serious deterioration is suggested. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

Approximation results for min‐max path cover problems in vehicle routing

This article studies a min‐max path cover problem, which is to determine a set of paths for k capacitated vehicles to service all the customers in a given weighted graph so that the largest path cost is minimized. The problem has wide applications in vehicle routing, especially when the minimization of the latest service completion time is a critical performance measure. We have analyzed four typical variants of this problem, where the vehicles have either unlimited or limited capacities, and they start from either a given depot or any depot of a given depot set. We have developed approximation algorithms for these four variants, which achieve approximation ratios of max{3 ‐ 2/k,2}, 5, max{5 ‐ 2/k,4}, and 7, respectively. We have also analyzed the approximation hardness of these variants by showing that, unless P = NP , it is impossible for them to achieve approximation ratios less than 4/3, 3/2, 3/2, and 2, respectively. We have further extended the techniques and results developed for this problem to other min‐max vehicle routing problems.© 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

坦克射击模拟器瞄准镜分划的过渡过程模型

坦克射击模拟器炮长瞄准镜视景中,稳像工况下瞄准镜分划的过渡过程要与实装炮长瞄准镜中保持一致。该过渡过程实质就是火炮跟踪瞄准线的过渡过程。在分析炮控系统控制模型基础上,得到了二阶控制系统差分方程模型,即为射击模拟器炮长瞄准镜分划的过渡过程模型。     

坦克炮控系统非线性特性及自适应补偿控制

影响坦克炮控系统低速性能主要有两个方面的因素,摩擦非线性和齿隙非线性。建立了坦克炮控系统数学模型,介绍了坦克炮控系统中摩擦、齿隙两类重要非线性模型,分析了摩擦、齿隙对炮控系统性能的影响,以及摩擦非线性环节导致系统低速时的爬行现象、速度过零时的平顶现象;齿隙非线性环节造成系统输出误差外,系统会因极限环振荡或冲击而降低性能,甚至不稳定,总结了炮控系统中针对摩擦、齿隙等非线性环节的自适应补偿控制的研究成果。     

远距离干扰下的被动侦察雷达功能仿真

对雷达探测能力的仿真往往是武器系统作战效能仿真中重要的一部分,功能仿真由于其方法简单、使用方便、速度快,比较适合较大对抗系统中对雷达探测能力的仿真。将被动侦察雷达功能进行分解并进行有机地结合,介绍了主要模块的数学模型,通过仿真实验对远距离支援干扰条件下的被动侦察雷达进行功能仿真,结果表明该方法具有较好的结果和较大的灵活性。     

基于重力加速度的自对准算法在摇摆台上的验证

摇摆基座条件下陀螺和加速度计测量的地球自转角速度和重力加速度受到了摇摆运动的干扰,无法根据陀螺和加速度计的输出直接获得初始姿态矩阵。针对这一问题,通过验证实验证明了基于重力加速度的对准算法的有效性,并依据实验结果从理论上对该方法的对准误差进行了分析,提出了进一步提高对准精度的措施。     

基于层间嵌入式多级支持向量机的特征选择

针对多故障样本一次性映射之后分类不理想,研究了多级层次式支持向量机,应用UCI数据仿真,结果表明该方法缩短了训练时间、提升了测试准确率、改善了样本的可分类性。由于误差积累,在此基础上,提出了层间嵌入式多级支持向量机,采用Abalone数据仿真,结果表明分类精度有所提高并减少了分类步骤。结合ReliefF算法,对制导设备的故障特征参数进行了选择。     

以变革的视角推进国防动员创新发展

国防动员作为一个重大的战略问题,必须适应未来战争和时代需求不断发展变化。本文重点从发展方向、基本平台、主要途径、功能拓展和组织模式上,以灵敏的视角、创新的思维,对全面推进国防动员创新发展进行了较为系统的阐述。     

未知火药剖析技术的探讨

火药是各类武器装备火力系统不可缺少的重要组成部分,随着武器装备的发展,产生了品种繁多的未知火药。未知火药作为一种特殊的未知物,其剖析技术囊括了预处理技术、定性技术和定量技术。