轮式装甲车辆的几何通过性建模与仿真

介绍了轮式装甲车辆通过障碍物的规则,分析了几何障碍物属性和通过判断条件,针对几何障碍物属性,提出了几何障碍物的通过算法,建立了几何通过性模型。采用VC＋＋编程对模型进行了仿真,通过仿真实验验证了算法和模型的可行性。     

管道气液固三相流的耦合瞬变模型研究

在管输水力瞬变过程中,管道与流体之间存在耦合互动作用,需要用流固耦合模型来进行描述.针对工程中的多相流动问题,以最常见的气液固三相流为对象,建立了考虑流固耦合效应的水力瞬变模型.通过改变流体中固相或气相的体积分数,模型可适用于气液、固液两相流以及纯液体单相流的耦合水力瞬变,是单相流耦合瞬变模型向多相流耦合瞬变模型的拓展...     

Numerical investigation of the shockwave overpressure fields of multi-sources FAE explosions

Shockwaves from fuel-air explosive (FAE) cloud explosions may cause significant casualties. The ground overpressure field is usually used to evaluate the damage range of explosion shockwaves. In this paper, a finite element model of multi-sources FAE explosion is established to simulate the process of multiple shockwaves propagation and interaction. The model is verified with the experimental data of a fourfold-source FAE explosion, with the total fuel mass of 340 kg. Simulation results show that the overpressure fields of multi-sources FAE explosions are different from that of the single-source. In the case of multi-sources, the overpressure fields are influenced significantly by source scattering distance and source number. Subsequently, damage ranges of overpressure under three different levels are calculated. Within a suitable source scattering distance, the damage range of multi-sources situation is greater than that of the single-source, under the same amount of total fuel mass. This research provides a basis for personnel shockwave protection from multi-sources FAE explosion.     

北斗三号新信号体制共视时间比对

为促使北斗系统特别是北斗三号系统尽早加入国际原子时计算,利用中国科学院国家授时中心以及捷克无线电工程和电子学院两个守时实验室接收机产生的北斗三号新信号体制观测数据,开展基于北斗三号新信号体制共视时间比对试验。结果表明,北斗三号信号的多路径噪声影响小于北斗二号信号,且信噪比优于北斗二号信号。对比已有的研究,北斗三号新信号体制(B1C和B2a)共视时间比对的噪声相对于北斗三号卫星播发的北斗二号兼容信号体制(B1I和B3I)有较大的改善,其结果与GPS、Galileo共视比对结果相当,且在零基线共钟比对中,基于北斗三号新信号体制比对钟差的标准偏差相对于北斗二号信号提高了40%以上;利用北斗三号新信号体制共视得到的亚欧两地钟差噪声小于北斗二号信号,且比对钟差的稳定度相对于北斗二号提高了10%以上。该试验也可为北斗三号时间比对纳入国际原子时计算提供相关的研究基础。     

基于信息增益比和SGAN的信息系统评估模型

信息系统的安全对于个人、企业甚至国家都至关重要,因此,对信息系统安全的评估也极为严格.以军工单位的信息系统为例,标准过于冗余,且样本数量较少,使得神经网络难以达到预期的评估效果.针对这些问题,建立了"信息增益比+SGAN"的分类评估模型,通过计算信息增益比得到各项指标对信息系统安全划分的重要度,减少无关紧要的冗余指标;用重要指标量化后的样本训练SGAN,得到一个强有力的分类判别网络,来对信息系统的安全进行评估分类,同时输出样本"真伪概率"和"下类似比系数"作为专家是否要人为对该系统进行评估的参考标准.     

一种新的未来空域窗瞄准点配置方法

依据未来空域窗理论最优射击密度,按照实际射弹命中点误差方差应与理论最优射击密度下射弹命中点误差方差相同的原则,提出了环状未来空域窗(包括椭圆环状未来空域窗和圆环状未来空域窗)的构造方法.同时,通过构建基于最优射击毁伤目标概率的有约束非线性函数,得到环状未来空域窗最优配置参数.算例分析表明:在网状未来空域窗、椭圆环状未来空域窗和圆环状未来空域窗中,当误差方向给定时,椭圆环状未来空域窗得到的毁伤概率最大;当误差方向未定时,圆环状未来空域窗得到的毁伤概率期望最大.     

A reusable planar triggered spark-gap switch batched-fabricated with PCB technology for medium-and low-voltage pulse power systems

Triggered spark-gap switch is a popular discharge switch for pulse power systems. Previous studies have focused on planarizing this switch using thin film techniques in order to meet the requirements of compact size in the systems. Such switches are one-shot due to electrodes being too thin to sufficiently resist spark-erosion. Additionally, these switches did not employ any structures in securing internal gas composition, resulting in inconsistent performance under harsh atmospheres. In this work, a novel planar triggered spark-gap switch (PTS) with a hermetically sealed cavity was batched-prepared with printed circuit board (PCB) technology, to achieve reusability with low cost. The proposed PTS was inspected by micro-computed tomography to ensure PCB techniques meet the requirements of machining precision. The results from electrical experiments demonstrated that PCB PTS were consistent and reusable with lifespan over 20 times. The calculated switch voltage and circuit current were consistent with those derived from real-world measurements. Finally, PCB PTS was used to introduce hexanitrostilbene (HNS) pellets in a pulse power system to verify its performance.     

Transverse relaxation characteristic and stress relaxation model considering molecular chains of HTPB coating based on pre-strained thermal aging

In order to accurately describe the transverse relaxation characteristic and stress relaxation modulus of HTPB coating during pre-strain thermal aging process, a one month thermal aging test was carried out at 70 C with pre-strain of 0％, 3％, 6％ and 9％, respectively. The low-field 1H NMR and stress relaxation modulus tests were carried out for HTPB coating at different aging stages. The stress relaxation model considering the molecular chains was proposed according to the changes of crosslinking chain and dangling chain of HTPB coating during pre-strain aging. The results showed that with the increase of aging time, the decay rate of transverse relaxation curve became faster, the transverse relaxation time decreased, the value of combined parameter qMrl increased, the proportion of crosslinking chain decreased, while the proportion of dangling chain increased. Moreover, the stress relaxation modulus increased, the crosslinking network structure of HTPB coating became denser and the degree of cross-linking increased. At the initial aging stage, the pre-strain will destroy the crosslinking network structure of HTPB coating to a certain extent. With the increase of aging time, the effect of pre-strain will gradually weaken and the influence of aging on materials will gradually increase. The correlations between the stress relaxation model considering the molecular chains and the test results were more than 0.9950, which can accurately describe the stress relaxation modulus of HTPB coating during the pre-strain thermal aging process.     

Repeater jamming suppression method for pulse Doppler fuze based on identity recognition and chaotic encryption

Pulse Doppler (PD) fuze is widely used in current battlefield. However, with the threat of repeater jamming, especially digital radio frequency memory technology, the deficiency in the anti-repeater jamming of a traditional PD fuze increasingly emerges. Therefore, a repeater jamming suppression method for a PD fuze based on identity (ID) recognition and chaotic encryption is proposed. Every fuze has its own ID which is encrypted with different chaotic binary sequences in every pulse period of the transmitted signal. The thumbtack-shaped ambiguity function shows a good resolution and distance cut-off characteristic. The ability of anti-repeater jamming is emphatically analyzed, and the results at different signal-to-noise ratio (SNR) show a strong anti-repeater jamming ability and range resolution that the proposed method possesses. Furthermore, the anti-repeater jamming ability is influenced by processing gain, bit error rate (BER) and correlation function. The simulation result validates the theo-retical analysis, it shows the proposed method can significantly improve the anti-repeater jamming ability of a PD fuze.     

基于排队论的防空导弹群作战效能研究

结合防空导弹群防空战斗的特点,利用可列状态生灭过程的排队论方法,研究了防空导弹群作战效能,建立了数学模型,分析了导弹群防空武器系统对目标平均击毁概率的计算方法,并通过引入拦截适宜性因子对理想条件下的排队模型进行了修正,为类似问题的研究提供了一种参考。