Parallel Sets的改进及其在全球恐怖袭击数据分析中的应用

随着恐怖主义愈演愈烈,"反恐"成为当今世界各国军事安全部门的中心任务.使用分类型可视化工具Parallel Sets分析国际恐怖主义数据库中多属性分类值间的关系,揭示数据库中的隐性信息,并针对Parallel Sets任意排列分类值产生较多交叉的不足,提出带降势的启发式分类值布局算法,自动优化分类值布局顺序,减轻视图中...     

一种基于粒子群优化算法的异构传感器分配方法

针对复杂的战场环境下目标环境机动性增强、传感器资源相对不足且单一传感器获取空间目标信息不完备问题,结合传感器节点自身的性能特征,考虑传感器的抗干扰性能等因素,提出一种传感器信息感知能力评估指标体系,并构建了传感器感知能力定量评价模型,计算出传感器指数.再利用传感器指数,考虑了覆盖率、电磁环境变化、态势变化等因素作为目标函数,研究基于粒子群算法的传感器分配方法,以实现传感器位置的最优分配及感知能力最大化的需求.仿真结果表明,将粒子群优化算法用于该研究,提高了传感器的总体感知能力和资源有效利用率.     

基于改进二进制蝙蝠算法的装备资源保障规划

针对联合作战环境下的装备资源精确保障协同规划问题,考虑以所有保障任务完成时间最短为目标,以保障任务的执行时序和资源需求、保障编组占用冲突,以及资源平台能力更新机制等复杂条件为约束,构建数学模型,提出了基于动态列表调度(Dynamic List Scheduling,DLS)和自适应进化变异二进制蝙蝠算法(Adaptive Mutation Binary Bat Algorithm,AMBBA)的混合装备资源协同保障规划方法.通过动态列表调度选择当前执行保障的任务,在二进制蝙蝠算法寻优中引入自适应学习因子以平衡全局搜索和局部搜索能力,通过在当前可用资源集中搜索最优解为选定任务分配资源,以复杂地域联合作战为例仿真并验证规划效果,结果显示,所提方法可对大规模装备资源协同分配保障问题进行精确高效求解.     

Fabrication and analysis of TIG welding-brazing butt joints of in-situ TiB2/7050 composite and TA2

Lightweight hybrid structures of Al MMCs and titanium alloy dissimilar materials have great prospect in the defence industry application. So, it is necessary to join Al MMCs with Ti metal to achieve this structural design. In this work, in-situ TiB2/7050 composite and TA2 were firstly attempted to join by TIG welding-brazing technique. The result was that the intact welding-brazing butt joint was successfully fabricated. The joint presents dual characteristics, being a brazing on TA2 side and a welding on TiB2/7050 side. At brazing joint side, ER4043 filler metal effectively wets on TA2 under TIG heating condition, and a continuous interfacial reaction layer with 1—3μm is formed at welded metal/TA2 interface. The whole interfacial reaction layers are composed of Ti(AlSi)3 intermetallic compounds (IMCs), but their morphologies at the different regions present obvious distinguishes. The microhardness of the reaction layers is as much as 141—190 HV. At welding joints side, the fusion zone appears the equixaed crystal structure, and the grain sizes are much smaller than those of welded metal, which is attributed to the effect of TiB2 particulates from the melted TiB2/7050 on acceleration formation and inhibiting growth for the new crystal nucleus. The tensile test results show that average tensile strength of the optimal welding-brazing joint is able to achieve 138 MPa. The failure of the tensile joint occurs by quasi-cleavage pattern, and the cracks initiate from the IMCs layer at the groove surface of TA2 and propagate into the welded metal.     

Formation and characterization of core-shell CL-20/TNT composite prepared by spray-drying technique

The core-shell 2,4,6,8,10,12-Hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane/2,4,6-Trinitrotoluene (CL-20/TNT) composite was prepared by spray-drying method in which sensitive high energy explosive (CL-20) was coated with insensitive explosive (TNT). The structure and properties of different formulations of CL-20/TNT composite and CL-20/TNT mixture were characterized by scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Laser particle size analyzer, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), differential scanning calorimetry (DSC), impact sensitivity test and detonation performance. The results of SEM, TEM, XPS and XRD show that ϵ-CL-20 particles are coated by TNT. When the ratio of CL-20/TNT is 75/25, core-shell structure is well formed, and thickness of the shell is about 20–30 nm. And the analysis of heat and impact show that with the increase of TNT content, the TNT coating on the core-shell composite material can not only catalyze the thermal decomposition of core material (CL-20), but also greatly reduce the impact sensitivity. Compared with the CL-20/TNT mixture (75/25) at the same ratio, the characteristic drop height of core-shell CL-20/TNT composite (75/25) increased by 47.6% and the TNT coating can accelerate the nuclear decomposition in the CL-20/TNT composites. Therefore, the preparation of the core-shell composites can be regarded as a unique means, by which the composites are characterized by controllable decomposition rate, high energy and excellent mechanical sensitivity and could be applied to propellants and other fields.     

Quasi-steady aerodynamic characteristics of Terminal Sensitive Bullets with short cylindrical portion

The aerodynamic characteristics are vital for short cylindrical Terminal Sensitive Bullets(TSB)with low aspect ratio,especially in terminal trajectory.Currently,there is little research in terms of the TSB and short cylinder with two free ends,and particularly in this trajectory,where the scanning angle β and roll angle α vary over a broad range between 0° and 180°.In this work,wind tunnel experiments are first conducted to learn the effects of Reynolds number and scanning angle on aerodynamic parameters for short cylinder with aspect ratio L/D = 1.Similar to infinite cylinder,for the short cylinder with two free ends,the drag crisis phenomenon still exists in the critical regime 1.7 × 105 ≤ Re ≤ 6.8 × 105.Then 3D simulations are performed to demonstrate the aerodynamic characteristics of short cylinder and TSB over a broad range of Re,L/D,α and β.The sensitivity analysis of time step and grid are presented as well.When β=0°,for short cylinder,the drag crisis phenomenon was also observed in the simulation,but not as obvious as in the wind tunnel test.In some attitudes,there is an obvious Kármán vortex in the wake of short cylinder and TSB.The correlation between time-averaged aerodynamic coefficients and L/D,Re,α&β is discussed.The vortex shedding frequency and shear layer behavior are obtained for quasi-steady and unsteady flow.Finally,the effect of end's shape on drag reduction and vortex shedding frequency is analyzed.     

基于随机有限集理论的多传感器目标联合检测跟踪算法

针对杂波环境中的目标检测跟踪问题,提出一种基于随机有限集理论的多传感器目标联合检测跟踪算法。算法将目标状态和量测描述为随机集合,建立考虑目标出现、目标保持、目标消失等情况的目标状态随机有限集模型,以及考虑漏检和虚警的多传感器量测随机有限集模型。将目标的联合检测跟踪问题构建为目标状态集合的贝叶斯最优估计问题,并基于随机有限集理论对该贝叶斯估计算法的递推表达式进行严格理论推导。采用序贯蒙特卡罗技术实现算法的递推滤波。仿真结果验证了该算法的有效性以及算法相对于传统基于数据关联算法的性能优势。     

用逆推法进行平面复杂机构的运动分析

本文依据相对运动不变性原理,提出了一种可用于平面复杂机构运动分析的有效方法——递推法。本方法可用来绘制机构运动简图以及推导机构运动参数之间的解析表达式。经计算机仿真证明:逆推法是正确而有效的。     

基于ISA总线的CAN通讯卡的设计与实现

为实现PC机在控制局域网络 (CAN)中的应用 ,开发设计了一种PC机与CAN的接口———CAN通讯卡。该通讯卡采用微控制器完成底层的CAN通讯任务 ,并利用双口RAM与PC机进行数据交换 ;通过基于Win9x的PC机设备驱动程序实现上层应用程序对通讯卡的操作。该系统结构紧凑、可靠性高 ,已在磁悬浮列车控制系统中得到了成功应用。     

增强型个人防火墙

信息时代 ,个人上网机的信息保护越来越受到社会的重视 ,个人防火墙就应运而生。首先简单介绍个人防火墙的原理和功能 ,在特殊IP的过滤和端口、漏洞和进程防护几个方面分析了当前一些典型的个人防火墙产品存在的缺点 ,提出了EPFW的概念 ,然后阐述了EPFW对个人防火墙的IP过滤、端口防护、漏洞防护、病毒防护和进程防护进行增强的设计问题、技术难点以及解决方法。这些都说明对于PC机信息保护而言 ,EPFW是一个可行的合理的解决方案。