NICALON SiC/Al 预制丝热膨胀特性研究

本文研究了NICALON SiC束丝纤维增强铝预制丝在15～400℃温度区间内的热膨胀特性。研究表明预制丝两次热循环后得到的膨胀曲线不一致,该曲线在15～400℃范围的平均热膨胀系数分别为3.2×10~(-6)℃~(-1)、4.1×10~(-6)℃~(-1)。本文对预制丝的热膨胀行为进行了理论分析和探讨,计算值和实验值较为符合。     

基于可信度理论的一种态势估计方法

态势估计是战场决策的基础,而如何进行正确的战场决策对战斗有着重要的影响。在对态势估计进行分析的基础上,根据可信度理论,提出了一种对态势估计问题进行推理的方法。该方法能够进行融合推理得到态势假设和事件之间的潜在关系,为决策提供依据。实例验证的结果表明,此方法对当前战场态势可给出有效的综合评价和理解,具有较高的可信性。     

舰空导弹拦截群目标火力分配作战效能研究

水面舰艇海上作战的主要威胁来自于敌方反舰导弹的攻击,因而水面舰艇的反导作战能力成为其作战效能的重要指标之一。通过建立舰空导弹的反导模型,结合复杂电磁环境下的目标捕获判断,运用蒙特卡罗法对舰空导弹反导效能进行综合评估,得出对舰空导弹武器系统效能影响的重要因素,通过分析得出几个有益作战的结论。     

针对S盒的ARIA-128差分故障分析

针对ARIA-128分组密码进行差分故障分析,并将差分故障分析简化为求解S盒输入与输出差分问题,同时进行仿真实验。实验结果表明：ARIA-128分组密码易遭受差分故障分析攻击,8次故障注入可恢复1轮扩展轮密钥,32次故障注入即可恢复主密钥。该方法也适用于其他SPN结构的分组密码算法。     

几种固体润滑层的减摩抗磨性能与耐腐蚀性能研究

在MFT-R4000摩擦磨损试验机上考察了几种固体润滑层的减摩抗磨性能,并利用电化学工作站研究了其腐蚀电流和腐蚀电位的变化情况,分析了磨损表面的形貌和硫元素的化学价态变化。几种改性表面的耐腐蚀性能从好到坏的顺序为：NSL层〉SLD层〉离子渗硫〉基体;抗磨性能从好到坏的顺序为：NSL层〉SLD层〉离子渗硫〉基体;摩擦因数从大到小的顺序为：基体〉离子渗硫〉SLD层〉NSL层。NSL层的耐腐蚀性能和抗磨减摩性能最好,原因主要是基础油和纳米材料的润滑作用和屏蔽作用。     

基于GM-PHD的低可观测编队目标跟踪方法

考虑到多编队在低可观测情况下存在的目标跟踪问题,提出了一种基于高斯混合概率假设密度(GM-PHD)滤波算法的编队目标跟踪方法.该方法是在修剪融合过程中,先保留剪掉的高斯分量,再对这些分量进行状态外推,利用JS(Jensen-Shannon)散度判断下一时刻状态估计值与外推状态值是否相似,以判断结果体现目标丢失情况,使得真实目标不丢失,解决了低可观测情况下目标易漏检带来的跟踪性能下降问题.然后,利用编队目标的特点,结合密度聚类方法估计出编队整体的状态,避免因状态估计集合中状态值过多影响算法性能.最终,仿真实验结果表明,该方法可以在低可观测情况下有效跟踪编队目标,具有较好的跟踪性能.     

Gas metal arc welding of high nitrogen stainless steel with Ar-N2-O2 ternary shielding gas

High nitrogen stainless steel with nitrogen content of 0.75％was welded by gas metal arc welding with Ar—N2-O2 ternary shielding gas. The effect of the ternary shielding gas on the retention and improvement of nitrogen content in the weld was identified. Surfacing test was conducted first to compare the ability of O2 and CO2 in prompting nitrogen dissolution. The nitrogen content of the surfacing metal with O2 is slightly higher than CO2. And then Ar—N2-O2 shielding gas was applied to weld high nitrogen stainless steel. After using N2-containing shielding gas, the nitrogen content of the weld was improved by 0.1 wt％. As N2 continued to increase, the increment of nitrogen content was not obvious, but the ferrite decreased from the top to the bottom. When the proportion of N2 reached 20％, a full austenitic weld was obtained and the tensile strength was improved by 8.7％. Combined with the results of surfacing test and welding test, it is concluded that the main effect of N2 is to inhibit the escape of nitrogen and suppress the ni-trogen diffusion from bottom to the top in the molten pool.     

A reusable planar triggered spark-gap switch batched-fabricated with PCB technology for medium-and low-voltage pulse power systems

Triggered spark-gap switch is a popular discharge switch for pulse power systems. Previous studies have focused on planarizing this switch using thin film techniques in order to meet the requirements of compact size in the systems. Such switches are one-shot due to electrodes being too thin to sufficiently resist spark-erosion. Additionally, these switches did not employ any structures in securing internal gas composition, resulting in inconsistent performance under harsh atmospheres. In this work, a novel planar triggered spark-gap switch (PTS) with a hermetically sealed cavity was batched-prepared with printed circuit board (PCB) technology, to achieve reusability with low cost. The proposed PTS was inspected by micro-computed tomography to ensure PCB techniques meet the requirements of machining precision. The results from electrical experiments demonstrated that PCB PTS were consistent and reusable with lifespan over 20 times. The calculated switch voltage and circuit current were consistent with those derived from real-world measurements. Finally, PCB PTS was used to introduce hexanitrostilbene (HNS) pellets in a pulse power system to verify its performance.     

Thermodynamics and performance of Al/CuO nanothermite with different storage time

The storage stability of energetic materials is important for its application. Here, the storage stability of Al/CuO nanothermite, which was prepared by electrospray method and stored with different storage time, was systematically researched. The activation energy of Al/CuO nanothermite was calculated by differential scanning calorimetry (DSC). The ignition temperature and the curve pressure history of Al/CuO nanothermite was measured using ignition temperature measuring device and constant-volume pressurization tests, respectively. Further, the thermites were characterized by X-ray Diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM) and Transmission electron microscopy (TEM). The results show that the morphology of the thermites did not change significantly. The activation energy was decreased from 254.1 kJ/mol to 181.8 kJ/mol after storage for 13 months. When stored for 0, 7 and 13 months, the peak pressures of Al/CuO nanothermite were 685.8 kPa, 626.3 kPa and 625.5 kPa, respectively. In addition to the ignition temperature, it was 775 ℃, 739 ℃ and 754 ℃, respectively. This result indicated that the ignition and combustion properties of Al/CuO nano-thermite are obviously reduced when stored for a long time, at room temperature.     

FPGA静电电磁脉冲辐照效应试验研究

根据国际电工委员会IEC61000-4-2标准,利用ESS-200AX型ESD模拟器,选用人体-金属模型,测试静电电磁脉冲(ESD EMP)对FPGA的影响,并针对试验结果对故障原因进行分析。试验结果表明:FPGA集成电路抗静电电磁脉冲能力较强,当在FPGA集成电路周围的静电放电电压达到13 kV时,静电电磁脉冲将破坏SRAM的查找表中的数据,致使FPGA功能性损坏,但重新加电可恢复正常。