Thermodynamics and performance of Al/CuO nanothermite with different storage time

The storage stability of energetic materials is important for its application. Here, the storage stability of Al/CuO nanothermite, which was prepared by electrospray method and stored with different storage time, was systematically researched. The activation energy of Al/CuO nanothermite was calculated by differential scanning calorimetry (DSC). The ignition temperature and the curve pressure history of Al/CuO nanothermite was measured using ignition temperature measuring device and constant-volume pressurization tests, respectively. Further, the thermites were characterized by X-ray Diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM) and Transmission electron microscopy (TEM). The results show that the morphology of the thermites did not change significantly. The activation energy was decreased from 254.1 kJ/mol to 181.8 kJ/mol after storage for 13 months. When stored for 0, 7 and 13 months, the peak pressures of Al/CuO nanothermite were 685.8 kPa, 626.3 kPa and 625.5 kPa, respectively. In addition to the ignition temperature, it was 775 ℃, 739 ℃ and 754 ℃, respectively. This result indicated that the ignition and combustion properties of Al/CuO nano-thermite are obviously reduced when stored for a long time, at room temperature.     

A reusable planar triggered spark-gap switch batched-fabricated with PCB technology for medium-and low-voltage pulse power systems

Triggered spark-gap switch is a popular discharge switch for pulse power systems. Previous studies have focused on planarizing this switch using thin film techniques in order to meet the requirements of compact size in the systems. Such switches are one-shot due to electrodes being too thin to sufficiently resist spark-erosion. Additionally, these switches did not employ any structures in securing internal gas composition, resulting in inconsistent performance under harsh atmospheres. In this work, a novel planar triggered spark-gap switch (PTS) with a hermetically sealed cavity was batched-prepared with printed circuit board (PCB) technology, to achieve reusability with low cost. The proposed PTS was inspected by micro-computed tomography to ensure PCB techniques meet the requirements of machining precision. The results from electrical experiments demonstrated that PCB PTS were consistent and reusable with lifespan over 20 times. The calculated switch voltage and circuit current were consistent with those derived from real-world measurements. Finally, PCB PTS was used to introduce hexanitrostilbene (HNS) pellets in a pulse power system to verify its performance.     

基于红蓝对抗的实战化教学组训方法研究 —— 以航空兵初级指挥专业为例

红蓝对抗训练是实战化训练的最高形式,近年来在部队演习演练中被广泛采用,效果显著。军队院校教学向部队靠拢,向实战聚焦,可在航空兵初级指挥专业的人才培养中引入红蓝属性,开展实战化教学的探索和实践。本文提出“模拟环境+师生对抗+硬度可调”的实战化教学组训方法：一是红蓝对抗模拟训练环境,可支撑航空兵初级指挥专业学员开展“规划-部署-实施-评估”的航空兵作战全流程红蓝对抗实战化教学;二是“蓝”教员和“红”学员师生对抗教学组织实施程序;三是适应学员能力渐进式增长的关于训练想定、蓝军能力、导调方式和评定标准的“硬度可调”机制。此外,为确保红蓝对抗实战化教学的顺利实施,给出了锻造“红蓝兼备”院校“蓝”教员队伍的几点建议。     

电磁核辐射对WSNs数据传输性能影响的分析

由于低传输时延和高带宽,射频(Radio Frequency,RF)信号广泛应用于无线传感网络(Wireless Sensor Network,WSN)节点间的通信.然而,外界电磁或核辐射影响了基于RF的WSN通信.电磁或核辐射导致节点通信间歇性中断,将此类节点称为故障节点.故障节点可能能够正常感测环境,但会间歇性失去...     

时间序列法在军械装备故障预测中的应用

运用时间序列的方法对军械装备使用中的故障进行预测,并以火炮射击的距离偏差、火炮轮胎下沉量为例进行定量的分析和计算,阐述了预测原理和使用方法。     

弹药包装经济效益评估

本文依据弹药包装的特点,通过对弹药包装军事经济效益的研究,建立了弹药包装经济效益评价指标体系和评估模型,并进行了实例分析。     

用解冻焦散线法测定平面应变裂纹的应力强度因子K_Ⅱ

本文就奇异点附近的变形可表示为一维函数的情况,导出了奇异点附近变形的凸凹性对照射光源的要求。用焦散线的这种性质测定平面裂纹的应力强度因子ＫⅡ,收到意想不到的效果。     

42－160柴油机离合器换向拨叉叉头优化设计的光弹验证

本文用光弹性实验方法验证了有限元法对４２—１６０柴油机离合器换向拨叉优化设计的结果。实验证明,有限元优化设计是正确、可靠的,效果是非常好的。     

15cm×15cm 磁悬挂天平系统(MSBS)的电磁场分析与计算

本文采用二维电磁场有限元法及磁路的简化计算法对15cm×15cm磁悬挂天平系统（MSBS）的阻力线圈间距、磁场的分布情况进行了分析计算,并与测试结果进行了分析比较,给出了15cm×15cm磁悬挂天平系统（MSBS）的结构方案。     

用时序展开法求解瞬时无耗传输线方程

本文用时序展开法直接在时域中求解了任意终端和输入端时无耗时变传输线方程。给出了这个问题的一般解。此方法简单,结果的物理意义明确,对分析准行波系统的时域问题具有一定的参考价值。