气控软体驱动器结构分析与优化设计

气控软体驱动器的结构特性对其运动和力学特性影响显著,目前气控软体驱动器支反力和倾角性能亟须提升.基于ABAQUS提供的脚本接口,采用Python语言开发脚本建立气控软体驱动器参数化仿真模型,将尺寸因子作为优化变量,联立Isight和ABAQUS,采用单因子试验方法确定倾角和支反力两个目标量的高敏感性影响因子.运用归一化...     

Constrained minimax optimization of continuous search efforts for the detection of a stationary target

Analytical resolution of search theory problems, as formalized by B.O. Koopman, may be applied with some model extension to various resource management issues. However, a fundamental prerequisite is the knowledge of the prior target density. Though this assumption has the definite advantage of simplicity, its drawback is clearly that target reactivity is not taken into account. As a preliminary step towards reactive target study stands the problem of resource planning under a min–max game context. This paper is related to Nakai's work about the game planning of resources for the detection of a stationary target. However, this initial problem is extended by adding new and more general constraints, allowing a more realistic modeling of the target and searcher behaviors. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Production to order and off‐line inspection when the production process is partially observable

This study combines inspection and lot‐sizing decisions. The issue is whether to INSPECT another unit or PRODUCE a new lot. A unit produced is either conforming or defective. Demand need to be satisfied in full, by conforming units only. The production process may switch from a “good” state to a “bad” state, at constant rate. The proportion of conforming units in the good state is higher than in the bad state. The true state is unobservable and can only be inferred from the quality of units inspected. We thus update, after each inspection, the probability that the unit, next candidate for inspection, was produced while the production process was in the good state. That “good‐state‐probability” is the basis for our decision to INSPECT or PRODUCE. We prove that the optimal policy has a simple form: INSPECT only if the good‐state‐probability exceeds a control limit. We provide a methodology to calculate the optimal lot size and the expected costs associated with INSPECT and PRODUCE. Surprisingly, we find that the control limit, as a function of the demand (and other problem parameters) is not necessarily monotone. Also, counter to intuition, it is possible that the optimal action is PRODUCE, after revealing a conforming unit. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

基于PCI总线的多路数据总线接口设计与实现

提出了一种主处理机可以直接控制的1553B总线接口模块的设计与实现方案,并简要介绍了其硬件结构、工作过程和软件开发.利用PCI协议芯片实现PCI局部总线与军用1553B总线的桥接,采用WDM技术编写驱动程序.所设计的总线接口模块符合MIL-STD-1553B总线标准,具有结构简单、成本低廉、操作方便等特点,可用于仿真,开发1553B总线产品.     

发射噪声背景下自导鱼雷命中概率

潜艇是一种隐蔽性良好的水下作战平台,低噪声是其生命力的保障,但在对目标进攻鱼雷攻击时会因为发射噪声过大而暴露发射阵位和影响鱼雷攻击效果.分析了潜艇鱼雷发射噪声对潜艇的占位射击可行域存在的影响,在目标舰探测到发射噪声后采取规避措施的态势下,对自导鱼雷在不同命中角情况下的命中概率进行了仿真计算,并给出了计算模型.仿真的结果可为发射噪声的限制指标提出参考.     

桅杆首阶固有频率控制与构形设计

基于Timoshenko梁理论,提出筒形桅杆首阶固有频率控制设计原理。依据该原理,采用Transfer matrix算法,研究了直壁式、外凸式及双曲式三种构形的桅杆首阶固有频率的变化规律,发现在桅杆高度、质量、顶部及底部截面边长相同的情况下,外凸式构形具有最大的首阶固有频率值。     

梯度变化非晶碳涂层的摩擦学行为

采用多源磁控溅射物理气相沉积法在单晶硅片、20Cr和Cr12W表面制备了梯度变化非晶碳涂层,测试了非晶碳涂层的纳米硬度和弹性模量及摩擦磨损行为.结果表明涂层具有较高的硬度和弹性模量,分别达到15.3 GPa和184 GPa;涂层具有较好的摩擦性能,在干摩擦条件下摩擦因数基本保持在0.1～0.2,磨损率达到10-9 mm3/( N·m)数量级.     

军队后勤物资联合采购的联盟规划方法研究

关注军队后勤物资采购模式的发展,研究网上联合采购这种新型的采购方式。在分析了目前军队后勤物资采购现状的基础上,首先介绍一种多Agent中介系统主导的联合采购市场模型IMASCPM,然后针对各单位具有多样化、个性化复杂需求关系的组合购买问题,给出一种后勤物资联合采购的联盟规划算法,对其算法复杂性进行了分析,并与国外相关研究进行了比较。     

蜜胺甲醛树脂壁材辣素微胶囊的表面分析与释放动力学

在乳液体系中,以蜜胺甲醛树脂为壁材,以原位聚合法制备了包裹辣素同系物——N-香草基壬酰胺的微胶囊．电镜确定了微胶囊的形成,通过红外光谱、比表面吸附和光电子能谱对壁材进行了表面分析,释放动力学显示囊心符合Huiguchi一维释放模式,与表面分析的假设一致。     

基于CPSO算法的海空跨域无人航行器集群协同作业路径规划

针对海空跨域无人航行器集群在复杂水域环境下协同作业以追踪水下目标的任务,提出一种基于协同粒子群(CPSO)的协同作业路径规划算法.考虑不同无人航行器集群特性优势,合理分解并分配远距离追踪水下目标任务过程,并利用CPSO算法进行路径规划.在CPSO算法中,首先为无人机(UAVs)集群规划飞行路径,UAV飞行过程中探测水面...