超声速气流中液体横向射流组合喷注特性实验

以液态燃料为动力的超燃冲压发动机中,液体横向射流在超声速气流中的喷注、混合和雾化特性直接影响了超燃冲压发动机燃烧室的工作效率。提出一种基于高速摄影的图像处理方法,此方法能消除图像处理过程中的人为因素干扰,得到唯一、定量的射流振荡的边界信息;提出一种基于粒子图像测速法的射流展向扩展边界获取方法,能得到射流破碎后形成液滴所能达到的最远距离;基于以上两种图像处理方法和对比实验研究了单孔喷注、展向组合和沿流向组合的喷注方式对射流穿透深度、展向扩展和激波角的影响,结果表明:相比单孔喷注方式,展向组合和沿流向组合的喷注方式均能增大射流的穿透深度,且能增大射流的展向扩展角和展向扩展范围;随着沿流向布置的喷孔间距的增大,射流的穿透深度增大。     

二维损耗和色散介质光子晶体传输特性的研究

将传输矩阵法(TMM)用于光子晶体传输特性的研究,采用Mur近似吸收边界和周期边界来截断计算区域,计算了以TM模正入射时,二维方格子光子晶体在完整周期结构下的透过率谱;在微波波段制作了光子晶体模型,并设计了实验装置,实验与数值模拟计算结果相符合;另外还研究了有损介质光子晶体、色散和吸收介质光子晶体的传输特性,及其对光子禁带的影响。     

二维Turbo编码的无人机通信研究

传统基于RS-Turbo码的系统需要提供RS译码及Turho译码2种不同的译码算法需求,使得译码器的软硬件设计复杂化,无法满足无人机通信要求.从理论上分析了Turbo码的性能特点,提出一种改进的二维turbo迭代算法,并应用在无人机通信仿真中.仿真结果表明该算法在低信噪比时能够提升误码率性能,且易于工程实现.     

单舰反导作战能力评估模型分析

水面舰艇海上作战的主要威胁来自于敌方反舰导弹的攻击,因而水面舰艇的反导作战能力成为其战斗能力和生存能力的重要指标之一。根据单舰反导武器系统的特点,建立了单舰在遭受单发导弹攻击和多发导弹攻击情况下的反导作战能力评估模型。     

紫外光谱法分析火场残留物汽油成分

根据汽油燃烧有可能生成复杂的多环芳烃的特点,对火场残留物中可能存在的微量汽油成分进行了提纯,并利用紫外分光光度计对样品进行分析,通过分析总结实验得出的数据及图谱,可以证明紫外光谱法分析火场残留物中可能存在的汽油成分是一种快速有效的鉴定分析方法。     

开山抚番:沈葆桢台湾防务建设中的重大举措

1874年日本侵台事件发生后,沈葆桢临危受命,赴台筹办台防。鉴于台湾生番地区的重要性,沈葆桢审时度势,着眼于台湾防务建设,施行了以“外防内治”为目的的开山抚番政策：开山修路、开禁招垦、增府置县、设立番学等,为促进台湾的政治、经济、文化全面发展,巩固台湾防务,发挥了积极作用。     

Effect of projectile parameters on opening behavior of PELE penetrating RC target

When a penetrator with enhanced lateral effect (PELE) impacts on a reinforced concrete (RC) target, the target is damaged with a large opening. An understanding of how PELE projectile parameters affect the opening dimension, is essential for effective design of the PELE projectile. In this study, under the condition that the impact velocity and target parameters (strength and thickness) were fixed values, the important influence factors of the PELE (jacket wall thickness B, jacket material strength Y1, filling material strength Y2 and angle of monolithic jacketθ) were determined by a dimensional analysis. Tests and simulations of the PELE penetrating the RC target were conducted to analyze the influence of these factors on opening diameter ((D), an equivalent diameter under relative kinetic energy). Based on the test and simulation results, it is found that the influence of these factors B, Y1 andθon the deformation mode of the jacket shows a similar trend:as values of the three factors decrease, the jacket deforms from small bending deformation to large one, and then to curling deformation. This causes the opening diameter to first increase with the decrease of these three factors, and then decreases. It is well known that the bending resistance of the jacket is related to these factors B, Y1 andθ. Therefore, a plastic limit bending moment (M0) of the jacket was quoted to characterize the influence of these factors on the bending deformation of the jacket and the opening diameter of the target. The influence factor Y2 causes (D) to first increase with the increase of Y2, and then decreases. A formula was developed to predict the opening diameter, whose influence parameters were considered in a dimensionless way. It has been shown that the dimensionless opening diameter (D)/d1 is dependent on two dimensionless parameters Q = (d31fc/M0) and G = (fc/Y2), where d1 and fc are the outer diameter of the projectile and the compressive strength of the target, respectively.     

Combat modeling of remotely targeted vehicles and a battery against a moving target

This paper considers a combined system composed of multiple stand-by remotely piloted vehicles (RPVs) and a single battery against a single passive enemy target, where the target, if not killed, is allowed to change its location after each attack. The RPV has the duty to report on target acquisition, to confirm a target kill, and to pass information on any change in target location after each battery attack. The battery has the duty to attack the target on the basis of the target location information provided to it by the RPV. We develop a closed-form expression for the time-dependent state probabilities of the system, which can be used to compute several important combat measures of effectiveness, including (a) the time-varying mean and variance of the number of the RPVs being alive and of the surviving enemy target, (b) the mission success, mission failure, and combat draw probabilities, and (c) the mean and variance of the combat duration time. Illustrative numerical examples are solved for these combat measures, and sensitivity analyses are performed with respect to target acquisition time and target kill probability. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 645–667, 1998     

After the Split: Partition,Successor States,and the Dynamics of War in the Horn of Africa

Why do partitioned successor states engage one another in armed conflict? We explore the drivers of war between successor states by comparing two border crises that followed the partitions of Ethiopia (1993) and Sudan (2011). We argue that the politico-military struggles that give way to partition create important historical memories that shape what successor states think about the utility of military force. While the partition of Ethiopia yielded successor states led by regimes that were victors of the preceding war of partition, the war of partition in Sudan produced successor states that emerged out of military stalemate. This distinction explains why Ethiopia and Eritrea waged a costly border war that Sudan and South Sudan were able to avoid.