Designing a screening experiment for highly reliable products

Within a reasonable life‐testing time, how to improve the reliability of highly reliable products is one of the great challenges to today's manufacturers. By using a resolution III experiment together with degradation test, Tseng, Hamada, and Chiao (1995) presented an interesting case study of improving the reliability of fluorescent lamps. However, in conducting such an experiment, they did not address the problem of how to choose the optimal settings of variables, such as sample size, inspection frequency, and termination time for each run, which are influential to the correct identification of significant factors and the experimental cost. Assuming that the product's degradation paths satisfy Wiener processes, this paper proposes a systematic approach to the aforementioned problem. First, an intuitively appealing identification rule is proposed. Next, under the constraints of a minimum probability of correct decision and a maximum probability of incorrect decision of the proposed identification rule, the optimum test plan (including the determinations of inspection frequency, sample size, and termination time for each run) can be obtained by minimizing the total experimental cost. An example is provided to illustrate the proposed method. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 514–526, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10024     

导弹制导控制与目标杀伤

采用协方差分析描述函数技术 (CADFT)对寻的导弹的制导精度进行了研究 ,提出了空气动力控制、直接侧向力控制的寻的导弹飞行末端的制导精度的一种新的解析模型 ,并研究了导弹直接碰撞杀伤目标的必要条件 ,该理论研究成果具有简单、实用、精度高的特点 ,为寻的导弹制导控制特性研究和揭示寻的理论普遍规律提供了一种新途径     

空气阻力对排球正面上手发球水平方向飞行距离的影响实验分析

该文以体院排球普修课男生为对象,通过高速摄影方法,对"空气阻力对正面上手发球水平方向飞行距离的影响"这一问题进行了实验研究.初步揭示了当击球高度,击球角度和击球初速度等条件一定的情况下同,正面上手发球在水平方向飞行的理论距离与实际距离的差值规律.     

Scheduling jobs with piecewise linear decreasing processing times

We study the problems of scheduling a set of nonpreemptive jobs on a single or multiple machines without idle times where the processing time of a job is a piecewise linear nonincreasing function of its start time. The objectives are the minimization of makespan and minimization of total job completion time. The single machine problems are proved to be NP‐hard, and some properties of their optimal solutions are established. A pseudopolynomial time algorithm is constructed for makespan minimization. Several heuristics are derived for both total completion time and makespan minimization. Computational experiments are conducted to evaluate their efficiency. NP‐hardness proofs and polynomial time algorithms are presented for some special cases of the parallel machine problems. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 531–554, 2003     

三维管理信息系统的摄像机控制分析与改进

在基于三维场景的管理信息系统中,摄像机作为人机交互的媒体直接决定场景对于管理人员的可视效果。针对全景摄像机控制方式选取问题,从位置和方向两个方面进行分析,提出了全景摄像机控制的两种改进方法。采用V irtools进行程序设计,通过实验测试表明,采用改进后的摄像机控制方法避免了操作人员对地形全貌观察的烦琐键盘操作,降低了对硬件性能配置的要求,增强了场景对于用户的可视效果,提高了管理工作效率。     

摩托车排放试验循环的全球技术法规研究

介绍了GTR2《全球统一的摩托车排放试验循环(WMTC)》的制定过程,中国对WMTC法规所做的主要工作;对比分析了WMTC法规与我国摩托车和轻便摩托车排放标准的主要差异。     

基于动态罚函数遗传算法的电磁探测卫星多星规划方法

针对电磁探测卫星的特点,考虑其主要约束条件,建立了多星联合规划数学模型,提出了基于遗传算法的电磁探测卫星多星规划算法.为处理遗传算法迭代过程中产生的不可行解,引入了基于罚函数法的约束处理方法.针对罚函数法中惩罚系数难以确定的特点,设计了惩罚系数自适应调整的动态罚函数机制.根据模拟的数据进行实验及分析,表明该方法能有效解决电磁探测卫星多星规划问题.     

基于最大保障时间的战时装备维修任务调度模型

战时维修机构承担的维修任务比较繁重,合理、科学地安排维修任务可以有效地提高作战部队的战斗力.对此,分析了战时维修任务调度的特点,建立了基于最大保障时间的维修任务静态、动态调度模型,并提出了相应的模型求解方法.利用本方法在满足作战单元最大保障时间前提下,可使得装备维修效益最大,并可以实现实时动态维修任务调度,有效地解决了一种战时维修任务调度问题.     

航母舰载机对空防御作战出航保障指挥决策建模

基于Agent的航母舰载机对空防御作战出航保障指挥决策系统,由数据部分和Agent组织部分组成.前者又含数据库、模型库、知识库、相关管理系统和MIS.后者包括五大决策Agent,通过界面Agent与用户进行交互,而与数据部分的交互则由DB监理Agent统一完成.对于系统内决策Agent的设计,可首先针对五大决策Agent的模板进行设计,再对其功能层进行实例化.     

一类不确定语言型机降场选择模型

机降场选择是超视距垂直登陆作战的关键工作之一。针对机降场选择的决策特点,定义了不确定语言集结算子,建立了基于不确定语言型多属性群决策方法的机降场选择评估模型。该模型直观、简单,降低了对指挥员的专业素质要求,有效弥补了指挥员的主观判断误差,提高了评估决策可靠性,具有较高的应用价值。