改进类电磁算法在武器目标分配问题中的应用

通过基于级数的粒子编码变换方法,将武器目标分配问题的约束条件进行了化简.对原始类电磁算法,在种群初始化、局部搜索、合力计算以及粒子移动等各步骤对其进行改造,使之适应武器目标分配问题的整数解空间.最后通过数值实验验证了该改造后算法解决武器目标分配问题的有效性.     

超声辅助喷射电沉积Ni镀层的表面形貌及硬度

试验以直接超声方式,在喷射电沉积装置的基础上加载超声设备,分别在20℃和50℃两种镀液温度下在A3钢基体上制备了加载超声和不加载超声Ni镀层,研究了超声波及温度对Ni镀层表面形貌和硬度的影响。试验结果分析表明：在20℃条件下,超声可避免镀层裂纹的产生,提高镀层的硬度;在50℃条件下,超声可细化镀层的组织,且可显著提高镀层硬度;超声波对喷射电沉积层组织和性能的影响机理主要在于超声空化引起的析氢减少、细晶强化和加工硬度。     

层次化作战模型集成规范

对作战模型进行规范化描述,不仅可以使各层次模型在不同的军事想定下进行重用,而且可以使模型的建立、管理、调度进入一种标准的工程模型,更适合作战模拟的使用.分三个层次探讨作战模型集成规范,从基础模型层、模型管理层和模型使用层三个方面探讨了作战模型集成的各层规范,从而为模型使用和集成打下基础.     

电视文化对青少年婚恋观的负面影响及对策

婚恋观是人生观的重要组成部分。青少年时期是人生观、价值观形成的关键时期。随着电视机的普及、收视率的提高,电视文化这种新的文化形态对青少年的发展及教育的影响日渐广泛,电视中一些不良信息对青少年婚恋观的形成具有潜移默化的影响。本文着重从电视文化的传播特点和传播内容两方面入手,分析电视文化对于青少年婚恋观的负面影响,并针对如何减少电视文化对青少年婚恋观的负面影响做了初步探讨。     

CEC/SINS组合的相对导航与定位算法

针对协同作战中高动态机动平台,CEC中基本的相对导航算法会产生较大滞后误差、引起过冲现象以及惯导误差随时间累积等问题,研究了一种基于CEC/捷联惯导(SINs)组合的相对导航算法,分析并介绍了算法的基本思想和特点,并对其滤波器进行了设计.仿真结果表明:该算法弥补了惯导误差随时闱积累的不足,提高了其导航精度和稳定性.     

探空火箭级间段的CAD系统

本文在CADKEY绘图软件包的支持下,开发了加筋圆柱结构CAD系统—Hcadx.此系统通过菜单引导用户的操作,可用经验公式或解析法作轴压稳定分析,用罚函数法优化参数,可以在不退出Hcadx的情况下启动CADKEY,自动绘制设计草图。此草图经过适当地编辑、修改、便可成为工程中能接受的工作图纸。     

基于HTCPN的飞机备件需求预测方法

针对航空兵部队飞机备件需求预测问题,提出了一种基于分层赋时着色Petri网(Hierarchical Timed Colored Petri Net,HTCPN)的飞机备件需求预测方法.根据飞机维修保障工作内容与流程,运用CPN Tools软件,构建飞机维修保障工作HTCPN总网仿真模型,以及故障维修工作HTCPN子网仿真模型.提出了备件需求量确定规则,建立了基于飞机出动架次率的备件需求预测模型.通过算例分析,验证了该方法的科学性和有效性.     

一种基于地表类型的地杂波快速仿真方法

地杂波仿真技术对机载雷达的设计与研制有着重要影响.针对机载雷达地杂波仿真技术开展研究,提出了一种基于地表类型的地杂波快速仿真方法.该方法以数字地图和载机航线为两个重要输入,采用雷达波束照射区域的数字地图为有效先验地理环境信息进行仿真,提高了杂波仿真的逼真度;同时针对传统仿真方法中计算量较大的问题,优化了散射单元中天线功率增益的计算方法,减少了仿真时间.对所提方法进行了计算机仿真验证,结果表明,该方法能够仿真多种场景下与实测数据高度近似的地杂波.     

Multi-objectives nonlinear structure optimization for actuator in trajectory correction fuze subject to high impact loadings

This paper presents an actuator used for the trajectory correction fuze, which is subject to high impact loadings during launch. A simulation method is carried out to obtain the peak-peak stress value of each component, from which the ball bearings are possible failures according to the results. Subsequently, three schemes against impact loadings, full-element deep groove ball bearing and integrated raceway, needle roller thrust bearing assembly, and gaskets are utilized for redesigning the actuator to effectively reduce the bearings' stress. However, multi-objectives optimization still needs to be conducted for the gaskets to decrease the stress value further to the yield stress. Four gasket's structure parameters and three bearings' peak-peak stress are served as the four optimization variables and three objectives, respectively. Optimized Latin hypercube design is used for generating sample points, and Kriging model selected according to estimation result can establish the relationship between the variables and objec-tives, representing the simulation which is time-consuming. Accordingly, two optimization algorithms work out the Pareto solutions, from which the best solutions are selected, and verified by the simulation to determine the gaskets optimized structure parameters. It can be concluded that the simulation and optimization method based on these components is effective and efficient.     

Study of high-speed-impact-induced conoidal fracture of Ti alloy layer in composite armor plate composed of Ti-and Al-alloy layers

In order to understand the mechanism of conoidal fracture damage caused by a high-speed fragment-simulating projectile in titanium alloy layer of a composite armor plate composed of titanium- and aluminum-alloy layers, the ballistic interaction process was successfully simulated based on the Tuler-Butcher and GISSMO coupling failure model. The simulated conoidal fracture morphology was in good agreement with the three-dimensional industrial-computed-tomography image. Further, three main damage zones (zones I, II, and III) were identified besides the crater area, which are located respectively near the crater area, at the back of the target plate, and directly below the crater area. Under the high-speed-impact conditions, in zone II, cracks began to form at the end of the period of crack formation in zone I, but crack formation in zone III started before the end of crack formation in zone II. Further, the damage mechanism differed for different stress states. The microcracks in zone I were formed both by void connection and shear deformation. In the formation of zone I, the stress triaxiality ranged from-2.0 to-1.0, and the shear failure mechanism played a dominant role. The microcracks in zone II showed the combined features of shear deformation and void connection, and during the for-mation process, the stress triaxiality was between 0 and 0.5 with a mixed failure mode. Further, the microcracks in zone III showed obvious characteristics of void connection caused by local melting. During the zone III formation, the triaxiality was 1.0-1.9, and the ductile fracture mechanism was dominant, which also reflects the phenomenon of spallation.