基于遗传算法的无线通信节点部署优化策略

根据无线通信节点部署过程中网络受到区域环境影响和电波传播损耗等实际问题,建立了考虑区域影响的信号衰减模型和无线通信网络覆盖模型,提出了一种综合考虑网络覆盖和通信干扰的优化部署策略。该策略采用了加速遗传算法,大大降低了计算量。基于该优化策略,通过仿真实验得到了特定区域的最优通信节点数和节点部署位置图。     

混合总线网络化ATS硬件结构与组网方案设计

混合总线网络化ATS可整合多种总线测试仪器/设备功能,发挥不同总线测试平台优势,增强系统灵活性,节约新系统的构建成本.针对靶场测试设备现状,研究了基于网络化测试技术的混合总线ATS构建方法.提出了混合总线网络化ATS硬件结构并设计了利用接口适配器和利用网关设备2种组网方案.     

层次分析法在修理级别分析中的应用

修理级别的非经济性分析有多个结果时,很难确定产品的合理修理级别,若采用经济性分析,数据采集难,并且可操作性差.因此,提出用层次分析法来决断产品合理修理级别的方法,以提高修理级别分析方法的可操作性,并为其工程化提供一种思路.     

Numerical investigation of the shockwave overpressure fields of multi-sources FAE explosions

Shockwaves from fuel-air explosive (FAE) cloud explosions may cause significant casualties. The ground overpressure field is usually used to evaluate the damage range of explosion shockwaves. In this paper, a finite element model of multi-sources FAE explosion is established to simulate the process of multiple shockwaves propagation and interaction. The model is verified with the experimental data of a fourfold-source FAE explosion, with the total fuel mass of 340 kg. Simulation results show that the overpressure fields of multi-sources FAE explosions are different from that of the single-source. In the case of multi-sources, the overpressure fields are influenced significantly by source scattering distance and source number. Subsequently, damage ranges of overpressure under three different levels are calculated. Within a suitable source scattering distance, the damage range of multi-sources situation is greater than that of the single-source, under the same amount of total fuel mass. This research provides a basis for personnel shockwave protection from multi-sources FAE explosion.     

典型作战场景下排爆机器人性能评价方法

针对目前反恐排爆机器人缺乏实战化性能考核方法的问题,结合其技术特点和典型作战应用环境,通过构建一种以通行、探测、转移、销毁等性能为主要考核科目的排爆作战场景,并以记分的形式给出一种简单、实用的排爆机器人作战评价体系.该评价体系经过武警部队装备部主办的全国首届"反恐突击-2019"智能无人系统挑战赛的实践验证,其具有良好的应用前景,可为现阶段反恐排爆机器人作战性能实战化考核提供参考依据.     

基于深度强化学习的无人战车自主行为决策

针对高动态强对抗战场环境下,无人战车面临的自主行为决策问题,分析了未来陆战场无人战车实际作战需求,构建了基于马尔可夫决策过程的自主行为决策模型,提出了一种深度强化学习结合行为树的方法,利用行为树的逻辑规则与先验知识降低强化学习问题的难度,保证收敛性和鲁棒性,同时使行为决策模型具有学习能力.构建典型作战场景,验证深度强化学习结合行为树的无人战车自主行为决策方法的有效性.     

Effects of nano-sized aluminum on detonation characteristics and metal acceleration for RDX-based aluminized explosive

Nano-sized aluminum(Nano-Al)powders hold promise in enhancing the total energy of explosives and the metal acceleration ability at the same time.However,the near-detonation zone effects of reaction between Nano-Al with detonation products remain unclear.In this study,the overall reaction process of 170 nm Al with RDX explosive and its effect on detonation characteristics,detonation reaction zone,and the metal acceleration ability were comprehensively investigated through a variety of experiments such as the detonation velocity test,detonation pressure test,explosive/window interface velocity test and confined plate push test using high-resolution laser interferometry.Lithium fluoride(LiF),which has an inert behavior during the explosion,was used as a control to compare the contribution of the reaction of aluminum.A thermochemical approach that took into account the reactivity of aluminum and ensuing detonation products was adopted to calculate the additional energy release by afterburn.Combining the numerical simulations based on the calculated afterburn energy and experimental results,the param-eters in the detonation equation of state describing the Nano-Al reaction characteristics were calibrated.This study found that when the 170 nm Al content is from 0％to 15％,every 5％increase of aluminum resulted in about a 1.3％decrease in detonation velocity.Manganin pressure gauge measurement showed no significant enhancement in detonation pressure.The detonation reaction time and reaction zone length of RDX/Al/wax/80/15/5 explosive is 64 ns and 0.47 mm,which is respectively 14％and 8％higher than that of RDX/wax/95/5 explosive(57 ns and 0.39 mm).Explosive/window interface velocity curves show that 170 nm Al mainly reacted with the RDX detonation products after the detonation front.For the recording time of about 10 μs throughout the plate push test duration,the maximum plate velocity and plate acceleration time accelerated by RDX/Al/wax/80/15/5 explosive is 12％and 2.9 μs higher than that of RDX/LiF/wax/80/15/5,respectively,indicating that the aluminum reaction energy significantly increased the metal acceleration time and ability of the explosive.Numerical simulations with JWLM explosive equation of state show that when the detonation products expanded to 2 times the initial volume,over 80％of the aluminum had reacted,implying very high reactivity.These results are significant in attaining a clear understanding of the reaction mechanism of Nano-Al in the development of aluminized explosives.     

Influences of different crossing types on dynamic response of underground cavern subjected to ground shock

An intersecting cavern is a common structural form used in underground engineering, and its safety and stability performance directly control the service performance of the whole project. The dynamic re-sponses of the three kinds of crossing type (+-shaped, T-shaped, L-shaped) caverns subjected to ground shock were studied by numerical simulation. The velocity plus force mode boundary setting method was proposed in the coupled static and dynamic analysis of a deep underground cavern. The results show that, among the three types of crossing caverns, the+-shaped cavern is the most significantly affected by the dynamic action, followed by T-shaped, and then L-shaped caverns. The vault settlement, straight wall deformation, vault peak particle velocity, effective plastic strain of surrounding rock, and maximum principal stress and strain at the bottom of the lining of the straight wall increase with the increase of cavern span. The vault settlement, straight wall deformation, effective plastic strain of surrounding rock, and the maximum principal stress and strain at the bottom of lining to the straight wall decrease with the increase of lateral pressure coefficient, and the peak particle velocity at the vault increases. The variation is small compared with the change of cavern span. The influence range of the underground cavern intersection is two cavern diameters from the intersection centre. The bottom of the straight wall at the intersection is the weak part. It is suggested to thicken the support locally to improve the stability of the cavern.     

Research on fuze microswitch based on corona discharge effect

Abnormal voltages such as electrostatic, constant current, and strong electromagnetic signals can erro-neously trigger operation of MEMS pyrotechnics and control systems in a fuze, which may result in casualties. This study designs a solid-state micro-scale switch by combining the corona gas discharge theory of asymmetric electric fields and Peek's Law. The MEMS switch can be transferred from "off" to"on" through the gas breakdown between the corona electrodes. In the model, one of the two electrodes is spherical and the other flat, so a non-uniform electric field is formed around the electrodes. The theoretical work is as follows. First, the relation among the radius of curvature of the spherical electrode, the discharge gap, and the air breakdown voltage is obtained; to meet the low voltage (30-60 V) required to drive the MEMS switch, the radius of curvature of the spherical electrode needs to be 10-50 μm and the discharge gap between the two electrodes needs to be 9-11 μm. Second, the optimal ratio ε is introduced to parameterize the model. Finally, the corona discharge structural parameters are determined by comparing the theoretical and electric field simulation results. The switch is then fabricated via MEMS processing. A hardware test platform is built and the performing chip tested. It is found that when the electrode gap is 9 μm, the electrostatic voltage is at least 37.3 V, with an error of 2.6% between the actual and theoretical air breakdown voltages. When the electrode gap is 11 μm, the electrostatic voltage is at least 42.3 V, with an error of 10.5% between the actual and theoretical air breakdown voltages. Both cases meet the design requirements.     

超宽谱电磁脉冲与无线电引信能量耦合因素的研究

通过超宽谱对配用不同弹体的无线电引信的辐照,分析了不同弹体以及配用某种弹体的引信不同放置方向对超宽谱电磁脉冲与无线电引信能量耦合的影响,并分析了弹体大小对能量耦合的影响。通过辐照、分析和计算最终得出:弹体是影响能量耦合的主要因素。弹体口径越大,超宽谱电磁脉冲与无线电引信的耦合能量越大。另外,配用弹体引信的不同放置方向也是影响能量耦合的重要因素;配用弹体的引信竖直放置时,超宽谱电磁脉冲与无线电引信的耦合能量最大。