重庆缙云山典型紫色土吸附TNT动力学研究

采用振荡平衡法对缙云山典型紫色土吸附TNT过程进行研究,探讨供试土壤对TNT吸附的动力学特征。结果表明,TNT在供试土壤上的吸附可分为快速吸附和慢速吸附2个过程,快速吸附过程主要发生在初始的15 min内,并且在吸附8 h后基本达到平衡。对动力学数据采用准一级动力学模型、准二级动力学模型、Elovich动力学模型以及颗粒内扩散模型进行拟合,拟合结果排序为准二级动力学模型Elovich动力学模型准一级动力学模型颗粒内扩散模型,说明供试土壤对TNT的吸附过程具体可分为液膜扩散、表面吸附以及内扩散3个阶段。     

基于保障时间窗的油料调拨运输模型

通过引入保障时间窗,同时考虑油料保障的时间约束和运力约束,建立了基于保障开始时间最早,并尽可能满足保障需求量的调度模型。针对问题的多目标性,基于理想点法将初始模型转化为单目标优化模型。采用粒子群算法对模型进行求解,并设计了算法编码和求解步骤。通过算例验证了模型和算法的可行性及有效性。     

气液同轴离心式喷嘴雾化特性实验研究

采用自行设计的两相喷雾实验设备和测量装置,通过ＭＦ激光散射测粒仪,对液氧液氢火箭发动机所用量气液同轴离心式喷嘴后方喷雾液滴的平均直径ＭＭＤ和液滴尺寸分布指数ｎ等雾化特性,进行了试验研究,测量了Ａ型喷嘴在不同气体和液体喷注压降、不同空间位置的喷雾特性。分析了气体喷注压降一定时液体喷注压降对雾化特性的影响规律,以及当液体喷注压降一定时气体喷注压降对雾化特性的影响规律,得出了一些有意义的结论。研完结果对气液同轴离心式喷嘴设计有一定的指导意义。     

基于聚-α烯烃油的锂基润滑脂流变性

为系统研究锂基润滑脂的流变性能,以12-羟基硬脂酸锂皂为稠化剂和聚-α烯烃(PAO)油为基础油制备了锂基润滑脂。考察了稠化剂含量、基础油黏度和温度对锂基润滑脂的触变性、储存模量、损耗模量、表观黏度和应变幅度等流变参数的影响,并对其影响机理进行了探讨。实验表明:锂基润滑脂是屈服性假塑性流体,在很小应变范围内以可恢复的弹性变形为主导,达到其屈服应力后,具有明显的剪切变稀现象;达到其流动点后,表现出黏性流体性质。     

重庆滨江空间的城市可识别性作用

在城市趋同发展的今天,营造城市特色空间以提高城市可识别性显得尤为重要。以重庆滨江空间为研究对象,通过文献查阅和实地调研归纳了重庆滨江空间的发展历程;分析了重庆滨江空间的特征,以及滨江空间对城市可识别性的重要作用;提出了重庆滨江空间多层次的生态环境丰富了城市公共生活,是辨析城市结构的重要场所,影响着城市发展进程中文脉传承的观点。     

全长和埋入式组合抗滑桩在挖断村滑坡中的应用

重庆市奉节县挖断村滑坡规模巨大,滑坡体长180~250m,滑坡体厚15~35m,剩余下滑力达5 337 kN/m,采用了前排全长后排埋入式的新型组合抗滑支挡技术,大大节省了工程投资。介绍了这种新型组合抗滑结构的设计方法,重点介绍了桩的长度计算、各桩承担滑坡推力计算、治理后的监测数据。工程竣工2年的监测数据表明滑坡变形趋于稳定,说明采用全长和埋入式组合抗滑桩治理该滑坡是有效的。     

保湿剂在装甲装备训练场防尘中的应用

介绍了保湿剂的防尘原理、效率和制法,阐述了保湿剂在构建绿色装甲装备训练场中的应用,对提高坦克成员的训练效果、延长装备的使用寿命和保护生态环境等均有重要意义.     

Designing acceptance sampling schemes for life testing with mixed censoring

Mixed censoring is useful extension of Type I and Type II censoring and combines some advantages of both types of censoring. This paper proposes a general Bayesian framework for designing a variable acceptance sampling scheme with mixed censoring. A general loss function which includes the sampling cost, the time‐consuming cost, the salvage value, and the decision loss is employed to determine the Bayes risk and the corresponding optimal sampling plan. An explicit expression of the Bayes risk is derived. The new model can easily be adapted to create life testing models for different distributions. Specifically, two commonly used distributions including the exponential distribution and the Weibull distribution are considered with a special decision loss function. We demonstrate that the proposed model is superior to models with Type I or Type II censoring. Numerical examples are reported to illustrate the effectiveness of the method proposed. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

Stein–Chen approximation and error bounds for order fill rates in assemble‐to‐order systems

Assemble‐to‐order (ATO) is an important operational strategy for manufacturing firms to achieve quick response to customer orders while keeping low finished good inventories. This strategy has been successfully used not only by manufacturers (e.g., Dell, IBM) but also by retailers (e.g., Amazon.com). The evaluation of order‐based performance is known to be an important but difficult task, and the existing literature has been mainly focused on stochastic comparison to obtain performance bounds. In this article, we develop an extremely simple Stein–Chen approximation as well as its error‐bound for order‐based fill rate for a multiproduct multicomponent ATO system with random leadtimes to replenish components. This approximation gives an expression for order‐based fill rate in terms of component‐based fill rates. The approximation has the property that the higher the component replenishment leadtime variability, the smaller the error bound. The result allows an operations manager to analyze the improvement in order‐based fill rates when the base‐stock level for any component changes. Numerical studies demonstrate that the approximation performs well, especially when the demand processes of different components are highly correlated; when the components have high base‐stock levels; or when the component replenishment leadtimes have high variability. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012     

基于广义标准轨迹的平衡滑翔状态反馈制导方法

对多约束条件下远程助推滑翔飞行器再人滑翔飞行问题,提出了一种基于广义标准轨迹的平衡滑翔状态反馈制导方法.建立了远程助推滑翔飞行器的动力学模型,确定了飞行轨迹约束条件,详细阐述了基于广义标准轨迹的平衡滑翔状态反馈制导方法的制导原理,设计了远程助推滑翔飞行器的侧向和纵向制导律,并采用LQR( linear quadratic regular)方法设计了纵向制导参数,仿真验证了该方法的可行性.与以往再人滑翔制导方法不同,该制导方法主要利用飞行攻角的变化来调节飞行轨迹,飞行过程中飞行器的速度倾侧角较小.仿真结果表明,该制导方法能满足远程助推滑翔飞行器的再入滑翔制导问题,并且具有较好的鲁棒性和自适应性.