带紧扰动的极大单调算子的满值性定理

将周海云关于m-增生算子的有关结果推广到极大单调算子场合。     

武器系统作战模拟环境的设计与实现

针对当前武器系统作战模拟不易于使用的观状,探讨了建立武器系统作战模拟多媒体表现环境的概念、方法和必要性,从总体上研究了武器系统作战模拟多媒体表观环境的系统结构、功能要求和实现过程。     

卡尔曼滤波在坦克目标状态估计中的应用

分析了现有机动目标数学模型及其卡尔曼滤波算法,并用数字信号处理器(DSP)对一个实际算法进行了实验.实验结果表明目标机动性能的提高将使坦克火控系统由于采用现行目标运动模型而产生较大的误差,因此,在火控系统中采用其他模型,如自适应模型等,势在必行.同时,对于跟踪精度高、实时计算量大的卡尔曼滤波算法,应用DSP技术实现具有良好的发展前景.     

坦克火炮控制系统动态仿真

坦克火炮控制系统的仿真和分析是系统设计和改进的重要内容.MATLAB\SIMULINK是先进的控制系统仿真工具.本文以我军某型坦克为背景,对高低向火炮控制系统进行了动态分析,在仿真分析结果的基础上对控制器的改进提出了意见.     

PAI-CAD/CAM 模型及实现技术研究

本文根据敏捷制造与动态联盟将制造系统空间扩展到全国乃至全球,传统的用于产品开发的ＣＡＤ／ＣＡＭ系统已无法满足动态联盟条件下的产品开发要求,必须开发一种新的ＣＡＤ／ＣＡＭ系统才能满足这一要求。笔者根据国际ＣＡＤ／ＣＡＭ发展趋势,结合我国具体国情,在传统的ＣＡＤ／ＣＡＭ基础上提出了“ＰＡＩ－ＣＡＤ／ＣＡＭ（Ｐｓｅｕｄｏ－ＡｇｉｌｅＩｎｔｅｌｉｇｅｎｔＣＡＤ／ＣＡＭ）”的新概念,并建立了一种系统模型,此外,文章还对系统的实现技术进行了深入的探讨。     

存储示波器在测量核爆炸电磁脉冲中的应用

介绍了存储示波器在核爆炸电磁脉冲测量中的应用,给出了系统框图,用计算机作ＦＦＴ运算,实现频谱分析．     

现代高速通信网络的性能及其应用现状分析

提出了对现代高速通信网络的性能要求,并着重就４种高速通信网络的主要性能、应用现状等进行了分析,指出了高速通信网络的未来发展方向．     

液体火箭发动机气液同轴式喷嘴混合特性实验研究

本文通过实验研究了液体火箭发动机气液同轴离心式喷嘴的混合特性。利用两相探针技术,测量了喷嘴下游喷雾流场中气液流强和混合比分布,考察了喷嘴缩进比和气液喷注压降等参数对混合特性的影响。结果表明,气液同轴离心式喷嘴的缩进比对喷嘴混合特性有较大影响,增大缩进比将导致更窄的气液流强分布和更均匀的混合,而改变气液喷注压降将导致不同的流强和混合比分布规律。     

Finding the Kth shortest path in a time‐schedule network

We consider the problem of finding the Kth shortest path for a time‐schedule network, where each node in the network has a list of prespecified departure times, and departure from the node can take place only at one of these departure times. We develop a polynomial time algorithm independent of K for finding the Kth shortest path. The proposed algorithm constructs a map structure at each node in the network, using which we can directly find the Kth shortest path without having to enumerate the first K − 1 paths. Since the same map structure is used for different K values, it is not necessary to reconstruct the table for additional paths. Consequently, the algorithm is suitable for directly finding multiple shortest paths in the same network. Furthermore, the algorithm is modified slightly for enumerating the first K shortest paths and is shown to have the lowest possible time complexity under a condition that holds for most practical networks. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

Multi-objectives nonlinear structure optimization for actuator in trajectory correction fuze subject to high impact loadings

This paper presents an actuator used for the trajectory correction fuze, which is subject to high impact loadings during launch. A simulation method is carried out to obtain the peak-peak stress value of each component, from which the ball bearings are possible failures according to the results. Subsequently, three schemes against impact loadings, full-element deep groove ball bearing and integrated raceway, needle roller thrust bearing assembly, and gaskets are utilized for redesigning the actuator to effectively reduce the bearings' stress. However, multi-objectives optimization still needs to be conducted for the gaskets to decrease the stress value further to the yield stress. Four gasket's structure parameters and three bearings' peak-peak stress are served as the four optimization variables and three objectives, respectively. Optimized Latin hypercube design is used for generating sample points, and Kriging model selected according to estimation result can establish the relationship between the variables and objec-tives, representing the simulation which is time-consuming. Accordingly, two optimization algorithms work out the Pareto solutions, from which the best solutions are selected, and verified by the simulation to determine the gaskets optimized structure parameters. It can be concluded that the simulation and optimization method based on these components is effective and efficient.