用于潜艇的数据融合算法结构设计

利用数据融合技术,在数据库的支持之下,充分发挥各传感器信息组合的潜能,为客观复现战术态势提供保障．文中给出了用于潜艇的数据融合算法的结构设计．     

基于案例的RCM分析系统研究

提出了利用基于案例的推理（CBR）技术开发以可靠性为中心的维修（RCM）分析系统的设想。提出了基于案例的RCM分析系统的结构,讨论了在开发系统原型机的过程中所采用的RCM案例的表示和组织,同类案例优先的检索策略,利用规则组合及调整案例等主要技术。     

分布式结构的坦克火控仿真系统的研究

采用现代仿真技术,分布式结构战车火控仿真系统在完成火控系统动态特性仿真任务后,可实现新火控系统研制过程的先期技术演示,并可为装备论证研究提供先进的仿真手段。此外还分析了以DIS结构接入到作战仿真系统的可能性和现实性。     

卡尔曼滤波在坦克目标状态估计中的应用

分析了现有机动目标数学模型及其卡尔曼滤波算法,并用数字信号处理器(DSP)对一个实际算法进行了实验.实验结果表明目标机动性能的提高将使坦克火控系统由于采用现行目标运动模型而产生较大的误差,因此,在火控系统中采用其他模型,如自适应模型等,势在必行.同时,对于跟踪精度高、实时计算量大的卡尔曼滤波算法,应用DSP技术实现具有良好的发展前景.     

Approximation results for min‐max path cover problems in vehicle routing

This article studies a min‐max path cover problem, which is to determine a set of paths for k capacitated vehicles to service all the customers in a given weighted graph so that the largest path cost is minimized. The problem has wide applications in vehicle routing, especially when the minimization of the latest service completion time is a critical performance measure. We have analyzed four typical variants of this problem, where the vehicles have either unlimited or limited capacities, and they start from either a given depot or any depot of a given depot set. We have developed approximation algorithms for these four variants, which achieve approximation ratios of max{3 ‐ 2/k,2}, 5, max{5 ‐ 2/k,4}, and 7, respectively. We have also analyzed the approximation hardness of these variants by showing that, unless P = NP , it is impossible for them to achieve approximation ratios less than 4/3, 3/2, 3/2, and 2, respectively. We have further extended the techniques and results developed for this problem to other min‐max vehicle routing problems.© 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

Performance analysis of queue length monitoring of M/G/1 systems

This study investigates the statistical process control application for monitoring queue length data in M/G/1 systems. Specifically, we studied the average run length (ARL) characteristics of two different control charts for detecting changes in system utilization. First, the nL chart monitors the sums of successive queue length samples by subgrouping individual observations with sample size n. Next is the individual chart with a warning zone whose control scheme is specified by two pairs of parameters, (upper control limit, d_u) and (lower control limit, d_l), as proposed by Bhat and Rao (Oper Res 20 (1972) 955–966). We will present approaches to calculate ARL for the two types of control charts using the Markov chain formulation and also investigate the effects of parameters of the control charts to provide useful design guidelines for better performance. Extensive numerical results are included for illustration. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

存储示波器在测量核爆炸电磁脉冲中的应用

介绍了存储示波器在核爆炸电磁脉冲测量中的应用,给出了系统框图,用计算机作ＦＦＴ运算,实现频谱分析．     

现代高速通信网络的性能及其应用现状分析

提出了对现代高速通信网络的性能要求,并着重就４种高速通信网络的主要性能、应用现状等进行了分析,指出了高速通信网络的未来发展方向．     

火炮的战场损伤评估与修复

根据战时靠前修理的原则,对战损武器作出快速反应,遏制参战武器战斗力的大幅度下降,是BDAR的任务。从火炮的基本原理、战损模式和影响,制定修复大纲,研制工具、设备,备件配备方案等几个方面分析了火炮战场损伤评估与修复的方法。     

RESEARCH ON TECHNOLOGY AND SYSTEM FOR ON-LINE MEASUREMENT OF SURFACE ROUGHNESS IN ULTRA-PRECISION MACHINING

ＲＥＳＥＡＲＣＨＯＮＴＥＣＨＮＯＬＯＧＹＡＮＤＳＹＳＴＥＭＦＯＲＯＮ－ＬＩＮＥＭＥＡＳＵＲＥＭＥＮＴＯＦＳＵＲＦＡＣＥＲＯＵＧＨＮＥＳＳＩＮＵＬＴＲＡ－ＰＲＥＣＩＳＩＯＮＭＡＣＨＩＮＩＮＧＬｕＨａｉｂａｏ;ＷａｎｇＹａｏｋｅ;ＺｈｕＪｉｇｕｉ;Ｚｈｏ...