一种面向故障的软件测试新方法

面向故障的软件测试方法是今后软件测试技术研究的主要内容.和传统的面向整个软件的测试方法相比,面向故障的测试方法对故障的检测针对性更强,特别是对传统测试方法难以检测的故障如存储器泄露故障、数组越界故障、空指针引用故障等的检测是非常有效的.从方法学上讲,面向故障的测试方法标志着一个测试理论的成熟,在测试方法学中具有里程碑的意义.面向故障测试方法有2个问题需要解决:①软件的故障模型,②面向该模型的自动测试方法,此文重点论述软件的故障模型问题.     

概率分布模型的飞机战备完好率评估与预测

飞机战备完好率是军用飞机战斗力的重要体现.在分析目前部队常用的飞机战备完好率算法缺陷的基础上,建立了基于概率分布的飞机战备完好率计算模型,该模型体现了飞机任务可靠性、维修性与战备完好性之间的关系.以某型飞机为例,通过分析飞机任务可靠度,利用飞机可靠性、维修性、保障性及作战训练任务的历史统计数据,依据概率分布模型对飞机的...     

Multi-objectives nonlinear structure optimization for actuator in trajectory correction fuze subject to high impact loadings

This paper presents an actuator used for the trajectory correction fuze, which is subject to high impact loadings during launch. A simulation method is carried out to obtain the peak-peak stress value of each component, from which the ball bearings are possible failures according to the results. Subsequently, three schemes against impact loadings, full-element deep groove ball bearing and integrated raceway, needle roller thrust bearing assembly, and gaskets are utilized for redesigning the actuator to effectively reduce the bearings' stress. However, multi-objectives optimization still needs to be conducted for the gaskets to decrease the stress value further to the yield stress. Four gasket's structure parameters and three bearings' peak-peak stress are served as the four optimization variables and three objectives, respectively. Optimized Latin hypercube design is used for generating sample points, and Kriging model selected according to estimation result can establish the relationship between the variables and objec-tives, representing the simulation which is time-consuming. Accordingly, two optimization algorithms work out the Pareto solutions, from which the best solutions are selected, and verified by the simulation to determine the gaskets optimized structure parameters. It can be concluded that the simulation and optimization method based on these components is effective and efficient.     

Storage life prediction under pre-strained thermally-accelerated aging of HTPB coating using the change of crosslinking density

In order to predict the storage life of a certain type of HTPB (hydroyl-terminated polybutadiene) coating at 25 C and analyze the influence of pre-strain on the storage life, the accelerated aging tests of HTPB coating at 40 C, 50 C, 60 C, 70 C with the pre-strain of 0%, 3%, 6%, 9%, respectively were carried out. The variation regularity of the change of crosslinking density was analyzed and the aging model of HTPB coating under pre-strained thermally-accelerated aging was proposed. The storage life of HTPB coating at 25 C was estimated by using the Berthelot equation as the end point of the aging life with a 30% decrease in maximum elongation. The results showed that the change of crosslinking density of HTPB coating increased with the increase of aging temperature and aging time, and decreased with the in-crease of pre-strain. Under 0% pre-strain, the relationship between the change of crosslinking density of HTPB coating and the aging time can be described by the logarithmic model with the confidence probability greater than 99%.The stress relaxation phenomenon existed under 3%, 6% and 9% pre-strained aging. The aging model considering chemical aging and pre-strain was established with the confidence probability greater than 90%. The storage life of HTPB coating was 15.2935 years at 25 C under 0% pre-strain, which was reduced by 13.9007%, 75.6949% and 89.7859% under 3%, 6% and 9% pre-strain, respectively. The existence of pre-strain has a serious impact on the storage life of HTPB coating, therefore, the pre-strain should be avoided as much as possible during the actual storage.     

路面不平度的频谱分析及其AR模型

描述了路面不平度的统计特性,建立了AR模型。运用现代谱估计的方法对沙土地、硬土地和耕地等非人工路面的频谱特性进行了分析,得到了沙土地等3种路面的加速度功率谱和位移功率谱密度曲线图。结果表明,沙土地和耕地路面要好于硬土地路面,该结论与常识相符,验证了用AR模型法进行功率谱分析的可靠性和可行性。     

战时装备维修保障资源优化模型

维修资源在抢修过程中的分配决定了抢修活动的平均处理时间和等待时间,针对抢修实施时维修资源的分配,研究资源的优化配置使抢修时间最小的问题.在抢修过程中使抢修时间最小的目标和约束条件下,提出了资源配置优化的排队模型,并结合遗传算法给出了求解最优配置模型的方法,通过实例分析说明了模型和方法的应用情况.资源配置优化模型和算法已成功应用于集群装备保障决策系统的开发.     

基于行为建模的移动代理性能评估

针对移动代理的分布式应用性能评估需求,建立了移动代理生命周期中主要行为的网络负载模型和时间消耗模型.在3种典型分布式应用想定下,分析了基于C＼S模式和移动代理模式的应用实现基本过程,对两种模式下的网络负载和执行时间进行了仿真比较,结果证明了在访问节点数量较多,网络传输速率较低时,移动代理模式的具有更好性能.     

基于离散降雨衰耗状态的卫星信道模型

针对Ka频段卫星信道中降雨衰耗的统计分布特点,建立了基于离散降雨衰耗状态的卫星信道模型,模型中各状态组成离散的Markov链并由其转移概率矩阵来表示,分析此模型下的信道误比特性能和数据包丢失性能。此模型能够适用于链路层以及高层通信协议。     

多旋翼无人机模型预测抗扰避障制导

多旋翼无人机的自主避障是完成复杂任务的基础,避障的效果直接影响无人机执行任务的效能。针对存在外部扰动的无人机避障问题,提出了一种基于模型预测的抗扰避障制导律设计方法。通过设计干扰观测器对系统动态中的外部干扰进行了估计,并基于李雅普诺夫函数方法设计辅助制导律用于建立稳定性约束条件。结合前两者与模型预测控制,在模型预测控制优化求解中考虑无人机与障碍物的关系,根据所设计的制导律求解水平线速度与偏航角速度指令实现无人机的避障。对所提出的避障制导律进行数值〖BHDWG8,WK10YQ,DK1*2,WK1*2D〗〖XCLQX.TIF;%129%129〗听语音 聊科研与作者互动 仿真和实物飞行验证,结果表明了所提方法的有效性。     

一种新型双转子发动机功率传输装置特性研究*

本文提出了一种基于摆盘和凸轮组合机构的双转子发动机功率传输装置。其结构简单、布置方式完全对称,平衡性好,能够通过凸轮控制转子的运动规律。为了分析和研究该机构的运行特性,建立了该机构的基本运动学模型,计算出了其运行轨迹,凸轮轮廓线等。分析了主要结构参数,如滚子轴线夹角和摆盘倾角,对其容积变化规律的影响。得出主要结论如下：滚子轴线夹角越靠近90°,气缸容积变化幅值越大。摆盘倾角与容积变化规律是成正比的,对于四叶片活塞转子而言,摆盘倾角最大可取值大约为65°。在实际中,滚子轴线夹角最好取90°,摆盘倾角要在留出足够叶片活塞厚度的前提下尽量去较大的值。