Study on energy release characteristics of reactive material casings under explosive loading

Reactive Materials (RMs), a new material with structural and energy release characteristics under shock-induced chemical reactions, are promising in extensive applications in national defense and military fields. They can increase the lethality of warheads due to their dual functionality. This paper focuses on the energy release characteristics of RM casings prepared by alloy melting and casting process under explosive loading. Explosion experiments of RM and conventional 2A12 aluminum alloy casings were conducted in free field to capture the explosive fireballs, temperature distribution, peak overpressure of the air shock wave and the fracture morphology of fragments of reactive material (RM) warhead casings by using high-speed camera, infrared thermal imager temperature and peak overpressure testing and scanning electron microscope. Results showed that an increase of both the fireball temperature and air shock wave were observed in all RM casings compared to conventional 2A12 aluminum ally casings. The RM casings can improve the peak overpressure of the air shock wave under explosion loading, though the results are different with different charge ratios. According to the energy release characteristics of the RM, increasing the thickness of RM casings will increase the peak overpressure of the near-field air shock wave, while reducing the thickness will increase the peak overpressure of the far-field air shock wave.     

不同加载方法对甲板大开口分段有限元计算的误差分析

利用ＭＳＣ－ＮＡＳＴＲＡＮ有限元程序模拟计算甲板大开口的应力．建立简单的总体和分段力学模型,采用不同的加载方法进行甲板应力计算,将局部应力计算结果与整体应力计算结果比较,得出各种加载方法有限元计算的误差,从而给出误差小、建模简单的局部分段模型加载的最佳方法．     

基于ANSYS／LS—DYNA的电子装备爆炸冲击振动损伤建模研究

针对电子装备爆炸冲击振动损伤问题,设计了损伤模拟的基本方案;采用ANSYS／LS—DYNA建立了二维“爆炸源-地面-弹性体-电子装备”模型;通过模型试验,获得了与实际爆炸冲击振动特性相吻合的加速度、位移和应力等数据。     

子母式穿甲弹子弹发射过程研究

对子母式穿甲弹子弹的发射过程进行详细的分析,得出了子弹长度与子弹飞离母弹速度的关系、子弹长度与火药燃烧率的关系、子弹长度与母弹弹头部发射孔内最大压力的关系以及子弹的长度与子弹发射所需时间的关系,为子母式穿甲弹设计提供了依据。     

电阻加载偶极天线阻抗带宽及脉冲辐射特性研究

分析了偶极天线电阻加载方面的若干问题,包括不同电阻加载方式阻抗频率特性比较,连续与离散串联集中电阻加载脉冲辐射特性比较,证明其它加载方式具有与Wu-King电阻加载相似的特性,与未加载偶极天线相比,阻抗带宽较宽,辐射脉冲失真较小。     

短脉冲激光作用下爆发沸腾的温度及汽泡行为研究

采用短脉冲激光加热浸没在丙酮液池的铂薄膜电阻的方法,以及高压电火花单次放电高速照相技术,在国内首次建立了超急速爆发实验台,达到了微秒级的温度频响和2×106帧/s的高速照相.研究发现,随着激光热流密度增加,试件表面温度快速升高到一饱和值,与过热液体的动力学理论极限温度非常接近.拍摄到了与常规沸腾很不相同的蘑菇云式爆发沸腾照片.试件表面及临近表面的微薄液层内瞬间爆发生成大量大小相当的细小汽泡,汽泡脱离直径远低于经典Fritz公式计算值,上浮速度先快后慢.     

煤层气加气站火灾爆炸危险性分析及消防对策

根据太原市煤层气加气站的具体情况,从设备安全、规范化安全管理等方面分析了CNG加气站的火灾爆炸危险性,探讨煤层气加气站消防安全的技术措施及对策。     

Field test and probabilistic analysis of irregular steel debris casualty risks from a person-borne improvised explosive device

Person-borne improvised explosive devices (PBIEDs) are often used in terrorist attacks in Western countries. This study aims to predict the trajectories of PBIED fragments and the subsequent safety risks for people exposed to this hazard. An explosive field test with a typical PBIED composed of a plastic explosive charge and steel nut enhancements was performed to record initial fragment behaviour, including positions, velocity, and trajectory angles. These data were used to predict the full trajectory of PBIED fragments using a probabilistic analysis. In the probabilistic analyses a probability of fatality or serious injury was computed. Based on the results presented, many practical conclusions can be drawn, for instance, regarding safe evacuation distances if a person were exposed to a suspected PBIED.     

衰减荷载作用下饱和软土的固结分析

研究了衰减荷栽作用下软土一维固结问题,建立了小变形固结模型,探讨了荷载衰减规律,分别求解了相应的小变形和大变形固结边值问题;通过理论解答与6块场地实测沉降的比较,表明用考虑荷载衰减的大变形固结理论计算软土一维固结的沉降值与实测结果接近。     

圆柱形容器爆炸焊接数值模拟与实验

针对深空探测采样容器的特殊要求,进行爆炸焊接严实密封技术研究。利用非线性动力学软件进行铝质柱形容器爆炸焊接数值模拟,得到各种焊接初始参数的影响规律,确定较佳焊接初始参数及容器结构尺寸,并进行实验验证。实验结果表明:外盖角度为7°时,1mm壁厚外盖配4mm壁厚内圆柱或2mm壁厚外盖配6mm壁厚内圆柱,配以较合适炸药厚度,密实焊接效果较理想。研究结果为深空探测采样容器结构设计提供了较好的参考。