隧道火灾机械通风临界风速研究

由于隧道的半封闭性,空间有限,当长度很长时空气流通不畅,一旦发生火灾,烟气就会迅速填充隧道,而且CO等危险气体也会随烟气向隧道扩散,这对隧道内车辆和人员造成极大的危险。因此,需要保证隧道内空气流通状态的良好以及发生火灾时对烟气的良好控制。模拟了隧道口附近发生一定功率火灾的情况下,控制烟气层流动所需要的临界风速。     

自动操瞄分段解析模糊控制器

提出一种基于分段解析模糊算法的控制器。该控制器采用分段解析函数控制规则 ,函数运算结果直接作为输出控制量 ,简化了模糊处理过程 ,且使得输出控制量参数具有自调整能力。实际应用表明 ,该模糊控制器成功地实现了火箭炮的自动操瞄控制。     

An attacker‐defender model for analyzing the vulnerability of initial attack in wildfire suppression

Wildfire managers use initial attack (IA) to control wildfires before they grow large and become difficult to suppress. Although the majority of wildfire incidents are contained by IA, the small percentage of fires that escape IA causes most of the damage. Therefore, planning a successful IA is very important. In this article, we study the vulnerability of IA in wildfire suppression using an attacker‐defender Stackelberg model. The attacker's objective is to coordinate the simultaneous ignition of fires at various points in a landscape to maximize the number of fires that cannot be contained by IA. The defender's objective is to optimally dispatch suppression resources from multiple fire stations located across the landscape to minimize the number of wildfires not contained by IA. We use a decomposition algorithm to solve the model and apply the model on a test case landscape. We also investigate the impact of delay in the response, the fire growth rate, the amount of suppression resources, and the locations of fire stations on the success of IA.     

Numerical investigation of dynamic interaction with projectile and harmonic behaviour for T-finned machine gun barrels

Machine gun barrels differ from their rifle counterparts in terms of profile. To support high rates of sustained fire, machine gun barrels are made thicker in order to dissipate more heat and maintain their flexural rigidity and thus accuracy, but on other hand they also contribute in weight addition to weapon. This investigation deals with comparison between a conventional machine gun barrel and an improved innovative design having T-fins, both having same weight and chambered in 5.56 × 45 NATO ammunition, to compare their structural and harmonic characteristics which were parameterized by factors such as modal spectrum, directional deformation at muzzle ends during a single shot fire and harmonic behaviour at corresponding range of exciting frequencies. The solid models of both the barrels having same weight, were created using Solidworks. The continuous input data functions were generated by MATLAB using the field tested discreet data points. The generated velocity-distance functions were converted into time dependent functions using integration algorithms to calculate transient parameters such as time steps, excitation frequency range, angle of rotation of projectile and its angular velocity. The dynamic condition simulated the varying nature of forces due to eccentricity in projectile and this data was fed to a time step study using ANSYS transient structural work bench followed by modal and harmonic analysis. The results showed a significant reduction in muzzle end deformation which thus proved that the T-finned barrel, although had same weight as that of the conventional one, but had better structural and harmonic characteristics, and hence it would inherit better firing accuracy.     

SPC技术在导弹厚膜混合电路生产中的应用

SPC(统计过程控制)作为一种先进的质量管理方法,在国外企业被广泛采用,目前国内也有众多企业开始推行.分析了实施SPC的重要性,根据SPC技术在推广应用中的主要工作内容,给出了导弹厚膜混合电路生产中SPC技术的应用方法,包括关键工序节点和工艺参数的确定、工艺参数数据的采集、控制图的使用、工序能力评价以及所采用的控制技术等实际应用方面的内容.     

互耦影响存在时修正MUSIC算法的DOA估计

首先用矩量法精确分析了考虑互耦影响时天线阵元的电流分布,给出了计算电流的解析式,并仿真计算了单元直线阵的电流分布。然后以等效网络法为基础研究互耦影响存在时修正MUSIC算法的DOA估计性能,仿真实验表明在互耦影响存在时MUSIC算法失效,而修正MUSIC算法仍然具有良好的DOA估计性能。     

药物效用鉴定的序贯抽样检验方法和条件推导

给出了制定药物效用鉴定的序贯抽样检验方案,对未用的同类药品进行随机抽样,利用抽样结果,对剩下的N-n个样品的性能进行推断,得到判断药品是否失效的抽样方法以及有效的抽样截断方案,在减小抽样量的前提下,准确的判断药物是否有效.并对该序贯抽样性能的优劣与固定样本最优检验方法进行了比较,得到在犯同样错误的前提下,序贯抽样检验的样本量比固定样本最优检验的样本量小的多.     

公共场所人员安全疏散评价方法探讨

公共场所安全疏散评价对于确保火灾中人员的生命安全具有重要意义。基于“性能化”防火设计的思想,对影响公共场所安全疏散的因素进行了分析,并对安全疏散的必要性能和评价程序进行了较为全面的探讨,其中包括烟气的评价、人员疏散能力的评价、疏散路线合理性的评价、疏散对策的评价等,目的在于通过合理的评价方法得出合理的疏散性能,为减少公共场所火灾造成的人员伤亡和财产损失提供帮助。     

不同温度阶段煤自燃的实验研究

通过对现今煤层自燃机理和防灭火技术现状分析,采用程序升温实验系统以及气相色谱仪等实验设备,以东山烟煤和芙蓉无烟煤两种煤为研究对象,利用加热炉实验系统,对两种煤样进行程序升温氧化试验和分析,通过氧气浓度的测定,分别计算得出耗氧速率等煤自燃特性参数,并分析得到两种煤样的临界温度和干裂温度,为更深入的煤氧化自燃实验研究提供依据和参考。     

滚动球变换支持下的TIN-DDM地形特征线自动提取方法

针对传统规则格网数字高程模型地形特征线提取方法中存在阈值难以定量调控、连接方式无法自适应调整以及地形特征线类型不完整的问题,将滚动球变换模型应用于不规则三角网数字水深模型(triangulated irregular network digital depth model,TIN-DDM)地形特征线的自动提取,在构建临界滚动球半径关联的地形特征点定量识别判定准则基础上,引入地形形态边界点概念,采用逆向工程的建模思路,建立了以剖分单元为基础的地形特征线自动提取模型,结合地形类型判定准则的多尺度表达特性及顾及水深数值的地形特征优化模型,提出了可多尺度表达且类型完整的地形特征线自动提取方法。试验结果表明:相比于经典地表流水模拟方法,该方法可实现完整、连续且细分的TIN-DDM地形特征线自动提取及多尺度表达,且提取的地形特征线具有更高的地形重构精度。