陶瓷基装甲抗枪弹机理研究现状

从陶瓷基装甲的特点出发,介绍了其抗弹性能的评定指标,讨论了弹靶撞击过程的划分,重点评述了抗弹机理的研究方法和陶瓷基装甲的耗能机制;并总结了影响陶瓷基装甲抗枪弹性能的4个主要因素:陶瓷厚度、约束条件、弹丸形状和撞击速度.     

传递矩阵法在连续系统中的作用

在分析离散系统振动时,传递矩阵法是一种重要的方法。将传递矩阵法应用到具有分布质量的连续系统中,给出了具有Rayleigh阻尼形式的梁在随机激励作用下响应分析。     

Effect of nano powder (Al2O3-CaO) addition on the mechanical properties of the polymer blend matrix composite

This work describes the preparation and study of the properties of composite nanoparticles prepared by the sol-gel method which consists of two materials (Al₂O₃-CaO), and study the effect of these nanoparticles on the mechanical behavior of a polymer blend (EP 4% + 96% UPE). The powder was evaluated by X-ray diffraction analysis, scanning electron microscopy analysis (SEM), particle size analysis, and energy dispersive X-ray analysis (EDX). The mechanical behavior of the composite material was assessed by tensile test, bending test and hardness test. The evaluation results of the composite nanoparticles showed good distribution of the chemical composition between aluminum oxide and calcium oxide, smoothness in particles' size at calcination in high and low temperatures, formation of different shapes of nanoparticles and different (kappa and gamma) phases of the Al₂O₃ particles. The results of mechanical behavior tests showed marked improvement in the mechanical properties of the resulted composite material, especially at 1.5%, compared with polymer blend material without nano powder addition. The tensile properties improved about (24 and 14.9) % and bending resistance about (23.5 and 16.8) % and hardness by (25 and 22) % when adding particles of size (63.8 and 68.6) respectively. Therefore, this reflects the efficiency of the proposed method to manufacture the nanocomposite powder and the possibility of using this powder as a strengthening material for the composite materials and using these composite materials in bio applications, especially in the fabrication of artificial limbs.     

An investigation on anti-impact and penetration performance of basalt fiber composites with different weave and lay-up modes

The woven basalt fiber composites (WBFC) and the unidirectional [0°/90°/45°/-45°]_s basalt fiber composites (UBFC) were prepared by hot-pressing. Three-point bending test, low velocity impact test, and ballistic test were performed to the prepared composites. After the tests, the specimens were recovered and analyzed for micromorphology. Three-point bending tests show that both the bending strength and stiffness of the WBFC surpass those of the UBFC. Low velocity impact test results show that the low velocity impact resistance to hemispherical impactor of the UBFC is higher than that of the WBFC, but the low velocity impact resistance to sharp impactor of the UBFC is lower than that of the WBFC. For the ballistic test, it can be found that the ballistic property of the UBFC is higher than that of the WBFC. After the tests, microscopic analysis of the specimens was applied, and their failure mechanism was discussed. The main failure modes of the UBFC are delamination and fibers breakage under the above loading conditions while the main failure mode of the WBFC is fibers breakage. Although delamination damage can be found in the WBFC under the above loading conditions, the degree of delamination is far less than that of the UBFC.     

模糊时滞系统控制器依赖于状态时滞的H∞控制

针对一类非线性时滞系统,研究了该系统基于T—S模糊模型的H∞控制器设计问题。采用线性矩阵不等式LMI的方法,设计一个依赖于状态时滞的模糊控制器,得到了系统存在模糊控制器的充分条件,此充分条件等价于一类线性矩阵不等式的可解性,最后通过仿真说明了控制器的有效性。     

多铁性磁电智能复合材料的力学研究进展

介绍了多铁性磁电智能复合材料的概念、分类及发展现状;总结了两类典型多铁性复合材料的力学问题（包括波动与振动问题、夹杂问题、断裂问题等）的研究进展;分析了层状多铁性复合材料力学行为的特殊性;基于应变介导的磁电耦合机制,阐述了界面断裂力学研究对于层状多铁性复合材料研制的重要性和必要性;最后指出了该领域下一步的研究方向。     

基于矩阵的C4ISR系统结构设计评价

主要目的是提出两种矩阵方法对C4ISR系统结构进行评价.其中邻接矩阵法用于评价C4ISR系统之间的互连互通性,对于评价规模较大、结构复杂的系统结构较为适用;模糊矩阵法用于评价系统之间的相似性,通过科学的评价指标体系消除系统之间的冗余.这些方法是当前主流的经验评价方法(如ATAM方法)的有效补充,具有一定的科学性和合理性.最后分别给出了两种方法的一个应用实例,体现了其在工程实践上的价值.     

基于矩阵分析的D-S证据理论的多传感器雷达体制识别

采用不确定推理的矩阵分析方法,建立了用于雷达体制识别的多传感器数据融合的数学模型,提出了一种基于矩阵分析的多传感器信息融合的新算法,结合多传感器多测量周期的雷达体制识别给出了具体的实例.识别结果说明了该算法的有效性.     

图形点阵液晶模块的中文菜单界面的实现

研究了基于DEM12864P图形点阵液晶模块实现中文菜单人机界面的问题。首先分析了液晶模块DEM12864P的特性,阐述了DDRAM寻址与液晶点阵的对应关系及中文字符、中文菜单在液晶模块上的显示规则,进而介绍了一种基于多任务背景的屏幕光标实现方法及菜单数据结构的设计,提出了相应软件设计的实现方法.     

整环上不定方程组的通解公式及其应用

借助Z上矩阵A∈Mm×n(Z)的标准形式D=VAU=diag(d1,d2,…,dq,0,…,0),得到了整环上不定方程组AX=B的通解公式以及矩阵初等变换法.