高速水射流倒空弹体装药安全性研究

本文阐述了高速水射流倒空弹体装药的机理,建立了确定水射流引爆炸药的临界速度的模拟实验方法和模型,进行了高速水射流冲击炸药的安全性试验,并对试验结果进行了分析,证明在工作泵压下高速水射流倒空弹体装药安全、可靠。     

CCD专用电源的研制

本文给出了ＣＣＤ专用电源的设计方案。该电源具有高效率、抗浪涌、工作电压范围宽、直流输出与交流隔离等优点。     

一种新型高效程控斩波器的设计

提出利用当前国际先进专用开关稳压电源集成芯片,设计高效、低纹波的新型新波器的原理及电路实现,并在实验条件下证明了本设计的工程适用性。     

The impact of animal welfare regulations on firms' product offerings: Humane or organic product?

Increased public concerns about animal welfare have spurred new regulations to improve animals' treatment and living conditions. We study how these regulations affect firms' product offerings, prices, and profits. We consider two competing animal agriculture supply chains, each consisting of a supplier and a buyer. New regulations require firms to choose between offering humane or organic products, which are differentiated by animals' living conditions. We find that consumers' growing awareness of animal welfare encourages firms to offer organic products, which require the highest standards for animals' living conditions. We also show that tightening humane product standards and loosening organic product standards encourage firms to offer organic products—but with distinct pricing implications. The former leads to higher retail prices whereas the latter may lower retail prices. Depending on costs and consumers' awareness of animal welfare, a humane product may be priced higher or lower than an organic product. Furthermore, we provide conditions under which a regulator should offer a unit-cost or an investment cost subsidy to improve social welfare. We show that subsidies can encourage firms to change from offering humane to organic products, or vice versa, to enhance total social welfare.     

旋成体射弹倾斜入水运动仿真

为了研究运动参数和弹头外形对弹体斜入水过程的影响规律,采用气液两相流体积分数和水汽空化模型,通过嵌套网格实现刚体三自由度运动学和动力学耦合,模拟了弹体以80～100 m/s速度倾斜入水开空泡阶段的运动过程。经文献实验验证,入水弹体速度与位移的误差为0～6%和-8%～0,转动角度误差为-6%～0。通过对入水速度和入水角度的多工况模拟研究,发现入水速度增大,弹体轴向冲击载荷增大,最大载荷与速度的平方呈线性关系,弹体速度非线性衰减率大;入水角增大,弹体转动角速率减小,运动稳定性强,速度衰减率不受入水角影响。与圆锥头部弹体相比,采用头部阶梯状修型后的弹体的平均速度衰减率、转动角速率和最大轴向冲击载荷分别降低到66.7%、40%和77.2%,显著提高了运动稳定性。     

富营养化水体修复技术的研究现状

湖泊、水库的富营养化已经成为当今世界最主要的环境问题之一。针对富营养化治理的关键问题、治理现状以及目前富营养化水体的一些主要修复技术进行了简要的阐述,并指出防治水体富营养化是一项复杂的系统工程,必须坚持从控制污染源出发,重点开展生态修复,完善管理对策,有计划地逐步实施。     

悬浮固相颗粒对储集层基质孔隙的堵塞规律研究

应用胜利油区8个不同区块的岩心及注入水,采用岩心流动实验手段,研究了注入水中悬浮颗粒对储层孔隙的堵塞特征,发现悬浮颗粒对储层的堵塞特征表现为孔隙逐步堵塞和迅速堵塞两种类型;悬浮颗粒浓度低且孔径与粒径的比值较大时易形成孔隙避步堵塞;悬浮颗粒浓度大或孔径与粒径的比值较小时易形成迅速堵塞;悬浮颗粒对储层的堵塞程度、堵塞类型是颗粒浓度、颗粒粒径与储层孔喉匹配综合作用的结果;迅速堵塞特征的初始堵塞效果主要取决于孔径与粒径的匹配关系,最终堵塞效果主要与注入水中的颗粒浓度有关;高浓度的小颗粒对孔隙基质的堵塞特征表现为迅速堵塞。     

Integrating decisions with advance supply information in an assemble-to-order system

We study a periodic-review assemble-to-order (ATO) system with multiple components and multiple products, in which the inventory replenishment for each component follows an independent base-stock policy and stochastic product demands are satisfied according to a First-Come-First-Served rule. We assume that the replenishment for various component suffers from lead time uncertainty. However, the decision maker has the so-called advance supply information (ASI) associated with the lead times and thus can take advantage of the information for system optimization. We propose a multistage stochastic integer program that incorporates ASI to address the joint optimization of inventory replenishment and component allocation. The optimal base-stock policy for the inventory replenishment is determined using the sample average approximation algorithm. Also, we provide a modified order-based component allocation (MOBCA) heuristic for the component allocation. We additionally consider a special case of the variable lead times where the resulting two-stage stochastic programming model can be characterized as a single-scenario case of the proposed multistage model. We carry out extensive computational studies to quantify the benefits of integrating ASI into joint optimization and to explore the possibility of employing the two-stage model as a relatively efficient approximation scheme for the multistage model.     

脉冲功率电源故障诊断方法研究

脉冲功率电源是电磁发射系统中最容易发生故障的薄弱环节,脉冲功率电源故障会使整个系统性能下降。针对脉冲功率电源故障,提出基于多层小波分析提取故障信息的模式搜索支持向量机故障诊断方法。通过建立脉冲功率电源的软故障模型,进行仿真分析获得电流故障数据样本,对故障样本进行离散小波分解,获得指定层细节信息的小波系数作为故障特征量;对故障特征量进行主成分分析,将小波系数进行降维,以便有效地进行故障诊断。通过实验,将所提方法故障诊断结果与其他三种故障诊断结果进行比较,验证了所提方法的有效性。     

Supply chain coordination with product line design and a revenue sharing scheme

Many manufacturers sell their products through retailers and share the revenue with those retailers. Given this phenomenon, we build a stylized model to investigate the role of revenue sharing schemes in supply chain coordination and product variety decisions. In our model, a monopolistic manufacturer serves two segments of consumers, which are distinguished by their willingness to pay for quality. In the scenario with exogenous revenue sharing ratios, when the potential gain from serving the low segment is substantial (e.g., the low‐segment consumers' willingness to pay is high enough or the low segment takes a large enough proportion of the market), the retailer is better off abandoning the revenue sharing scheme. Moreover, when the potential gain from serving the low (high) segment is substantial enough, the manufacturer finds it profitable to offer a single product. Furthermore, when revenue sharing ratios are endogenous, we divide our analysis into two cases, depending on the methods of cooperation. When revenue sharing ratios are negotiated at the very beginning, the decentralized supply chain causes further distortion. This suggests that the central premise of revenue sharing—the coordination of supply chains—may be undermined if supply chain parties meticulously bargain over it.