介子跃迁形状因子的重夸克极限和1/m_Q修正

在BS理论框架下,对0~-→0~-和0~-→1~-(0~-和1~-分别代表赝标介子和矢量介子)跃迁的形状因子进行模型无关的分析.结果表明BS框架既能给出重夸克极限下的自旋—味对称性,又能给出重夸克有效理论关于1/m_Q修正的Luke定理及其它关系.     

磁致伸缩扭转导波小管径弯管检测

针对扭转导波对小管径弯管的检测问题,分别采用数值模拟和实验方法进行研究。使用ANSYS软件模拟扭转导波在弯管中的传播;设计一种针对小管径管道的磁致伸缩扭转导波检测传感器,并对弯管进行检测,建立该传感器的导波激发和接收模型,利用理论模型对实验信号进行解读。研究结果表明:T(0,1)模态导波在小管径管道弯头处发生模态转换,部分T(0,1)模态转换成F(1,1)模态,F(1,1)模态具有方向性,垂直于弯头拱背-拱腹方向;模态转换会造成检测信号的双端面反射现象,第二个端面回波与第一个端面回波幅值比随频率的增大呈减小趋势;传感器激发出的纵向磁致伸缩力会导致实验信号中出现少量纵向模态导波。研究结论为磁致伸缩扭转导波对小管径弯管的检测提供理论指导。     

The Organization of the Defense Support System: An Economic Geography Perspective

In the context of restricted budgetary resources and the growing cost of maintenance, repair, and overhaul (MRO) activities, a major issue for modern armed forces is to sustain defense platforms. A possible method consists of realizing economies of scale through the concentration of maintenance activities, which involves the spatial reorganization of existing industrial sites dedicated to MRO. This article provides a formalized framework to discuss the optimal organization for the MRO of defense platforms in space. The public planner organizes the maintenance of defense platforms with only two possible spatial configurations. In the dispersed configuration, two industrial production units in charge of the maintenance optimally cover space, whereas in the concentrated configuration, a unique industrial unit covers space. Focusing on the tipping point between the two configurations, the balance of forces between agglomeration and dispersion in defense support activities is described and discussed. On the one hand, economies of scale provide an opportunity to optimize defense support costs, favoring concentration in a unique industrial unit. On the other hand, space causes dispersion to reduce both transport costs and operational social costs. This trade-off illustrates a general principle in spatial economics with an application to MRO production in the French case.     

非致命防暴动能弹作战效能评估

提出了非致命防暴动能弹作战效能的评估法,分析了非致命防暴动能弹的技术性能,建立了以非致命性为核心指标的防暴动能弹效能指标体系。采用定性分析与定量分析相结合,将集对分析法应用到了非致命防暴动能弹的效能评估中,对3种防暴动能弹进行了效能评估。为非致命防暴动能弹的研发生产提供了重要的理论支撑。     

二部图的(g,f)匹配

本文证明了二部图存在(g,f)匹配和f 因子的充要条件以及有关的几个结果,并且给出了求二部图的最大(g,f)匹配、最小(g,f)匹配和最小权最大f 匹配、最小权(g,f)匹配、最大权(g,f)匹配的算法。     

新型硫代双烯镍络合物合成及其对菁染料的光稳定作用

在合成中间体二(4-叔丁基苯基)羟乙酮基础上,进一步合成了双(1,2-二(4-叔丁基苯基)-1,2-二硫代双烯)镍络合物(DYE-02),利用核磁共振氢谱、红外光谱和元素分析等方法对中间体及DYE-02的结构进行了表征,并研究了DYE-02自身的光稳定性能及其对菁染料(Cy7)的光稳定作用.结果表明,与双(1,2-二苯基-1,2-二硫代双烯)镍络合物(DYE-01)相比,苯环上引入叔丁基后,DYE-02的最大近红外吸收波长在885nm,发生明显的红移,具备更好的自身光稳定性,并且能明显提高菁染料的光稳定性.     

基于HLA分布式仿真的Web服务化

HLA虽然能够简化各类仿真系统的互操作和重用,但是接口规范与编程语言的绑定、缺乏与商业技术的融合等阻碍了它在商业领域的广泛应用,Web服务具有平台和厂商独立等良好特性,实现基于HLA分布式仿真的Web服务化能够将Web服务的优势附加给HLA.该文在分析了HLA不足和web服务优势的基础上,提出了HLA Web服务化,对比了互操作在两个上下文中的差异,分析了实现HLA Web服务化的三个层次;之后,概述了相关研究,重点讨论了实现Web使能RTI的关键技术问题及其解决方案;最后,设计了原型系统,测试结果显示原型系统能够初步实现RTI的Web服务化.     

MIMO-OFDM系统Turbo接收机中的信道估计器

设计了一种新的MIMO-OFDM系统Turbo接收机中的信道估计器.考虑了信道估计误差对编码比特外信息计算的影响,利用软球形译码器的搜索列表和解码器反馈的先验信息对传统EM信道估计中的软信息近似处理进行了修正,获得了更为准确的软符号统计信息用于信道估计,提出了考虑软符号互相关性的Bayesian EM(BEM)信道估计算法.仿真结果表明,新算法较传统EM算法具有更低的误码率和更小的估计均方误差值.     

The stochastic single resource service‐provision problem

The service‐provision problem described in this paper comes from an application of distributed processing in telecommunications networks. The objective is to maximize a service provider's profit from offering computational‐based services to customers. The service provider has limited capacity and must choose which of a set of software applications he would like to offer. This can be done dynamically, taking into consideration that demand for the different services is uncertain. The problem is examined in the framework of stochastic integer programming. Approximations and complexity are examined for the case when demand is described by a discrete probability distribution. For the deterministic counterpart, a fully polynomial approximation scheme is known 2 . We show that introduction of stochasticity makes the problem strongly NP‐hard, implying that the existence of such a scheme for the stochastic problem is highly unlikely. For the general case a heuristic with a worst‐case performance ratio that increases in the number of scenarios is presented. Restricting the class of problem instances in a way that many reasonable practical problem instances satisfy allows for the derivation of a heuristic with a constant worst‐case performance ratio. Worst‐case performance analysis of approximation algorithms is classical in the field of combinatorial optimization, but in stochastic programming the authors are not aware of any previous results in this direction. © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

计算机辅助加工工件变形分析方法研究

为迅速、准确、合理地确定切削加工的工艺参数 ,将有限元方法、人工神经网络和遗传算法运用于计算机辅助加工工件变形分析中。通过合理的系统设计 ,实现了对工件切削加工变形量的准确预报和对加工参数的正确优化。实际生产证明 ,采用本方法优化确定加工参数 ,达到了预期的迅速、准确、合理的目标 ,有效地降低生产成本 ,提高生产率