球磨时间对纳米SiO_2/Cu复合材料摩擦学性能的影响

采用球磨法与热压烧结工艺制备了添加w（n-SiO2）=1.0%的铜基纳米复合材料。通过球盘式摩擦磨损试验机测试了复合材料的摩擦磨损性能,采用排水法和场发射扫描电镜（FSEM）研究了复合材料的致密度、显微组织和磨损形貌。结果表明：球磨可提高复合材料的致密度,改善n-SiO2在铜基体中的分散均匀性;随球磨时间的增加,复合材料的动摩擦因数和磨损量先减小后增加,球磨10 h复合材料具有较低的摩擦因数和磨损量,磨损机理主要为磨料磨损。     

陕西蒲城Q_2黄土物质组成试验研究

利用激光散射粒度分布分析仪、X射线衍射仪等先进的测试手段和化学成分分析,得到了陕西蒲城Q2黄土的物质组成特点,包括颗粒组成、矿物成分、化学成分、易溶盐含量、酸碱特性等,并指出与Q3黄土的差异。为深入研究Q2黄土的湿陷机理和工程地质特性以及解释与Q3黄土工程性质的差异提供科学依据。     

军用物联网研究综述

物联网是近两年的研究热点,当前,军用物联网的发展尚处于起步阶段。提出了军用物联网的概念,研究了军用物联网关键技术,阐述了军用物联网在作战训练、后勤保障、武器装备等领域的应用,展望了军用物联网研究工作中将遇到的挑战及应对方法,为军用物联网的技术研制、公共支撑环境和应用示范服务提供借鉴。     

Preparation and characterization of HMX/EVA/hBNNSs micro-composites with improved thermal stability and reduced sensitivity

Hexagonal boron nitride nanosheets(HBNNSs)have huge potential in the field of coating materials owing to their remarkable chemical stability,mechanical strength and thermal conductivity.Thin-layer hBNNSs were obtained by a liquid-phase exfoliation of h-BN powders and incorporated into EVA coatings for improving the safety performance of 1,3,5,7-tetranitro-1,3,5,7-tetrazocane(HMX).HBNNSs and ethylene-vinyl acetate copolymer(EVA)were introduced to HMX by a solvent-slurry process.For com-parison,the HMX/EVA and HMX/EVA/graphene(HMX/EVA/G)composites were also prepared by a similar process.The morphology,crystal form,surface element distribution,thermal decomposition property and impact sensitivity of HMX/EVA/hBNNSs composites were contrastively investigated.Results showed that as prepared HMX/EVA/hBNNSs composites were well coated with hBNNSs and EVA,and exhibited better thermal stability and lower impact sensitivity than that of HMX/EVA and HMX/EVA/G composites,suggesting superior performance of desensitization of hBNNSs in explosives.     

分布式A2C2决策队设计

现代战争的特点是高度的分布式协同作战。面对瞬息万变的战场需求 ,完成分布协同作战的指挥自动化系统 ,就必须能够自动适应战场需求变化 ,不断改变指挥系统组织结构。因此 ,实现指挥自动化系统的中心工作是建立 C2系统自适应变结构决策队组织。论述了建立自适应分布式指挥决策组织结构的有关问题 ,研究了在分布式条件下 ,自适应 C2决策队结构的设计。     

淀粉─丙烯酸型保水剂的制备及保水能力研究

以玉米淀粉为原料,在常温下经碱糊化,用ＫＭｎＯ４作引发剂,进行丙烯酸与淀粉接枝共聚。对其聚合条件和接枝共聚物的保水能力进行了研究,为保水剂的开发应用提供依据。     

菜籽油制备生物柴油及其理化性能的研究

研究了植物油(菜籽油)在NaOH催化作用下与甲醇反应制备生物柴油的工艺条件,考察了醇油摩尔比、催化剂用量、反应时间和反应温度等条件对反应的影响,实验结果表明该反应较适宜的条件为:反应温度50℃、醇油摩尔比6:1、催化剂用量为原料油质量的0.8％、反应时间为20min。对所得生物柴油的主要性能指标进行了考察,发现除粘度较大外,其主要性能指标与我国O#柴油相接近,掺入少量柴油后完全可以作为柴油机燃料使用。     

The mechanical performance and a rate-dependent constitutive model for Al3Ti compound

The Al₃Ti compound has potential application in the high temperature structure materials due to its low density, high strength and stiffness. The mechanical behaviors of the material under different loading rates were studied using compression tests. The results indicate that Al₃Ti is a typical brittle material and its compressive strength is dependent on the strain rate. Therefore, a series of rate-dependent constitutive equations are needed to describe its mechanical behaviors accurately. However, it is still short of professional research on the material model for Al₃Ti. In this study, the material model was developed on the basis of JH-2 constitutive equations using the experimental data. The model was then applied in simulating the impact process of Ti/Al₃Ti metal-intermetallic laminate composites so as to validate the established model. Good agreement between simulation and experiment results shows the constitutive model predict the material responses under high rate and large deformation accurately. This work provides more support for the theoretical and numerical research on the intermetallic.     

富马酸二甲酯的固体酸催化合成及HPLC检测

以SO42-/TiO2固体超强酸为催化剂催化富马酸与甲醇合成富马酸二甲酯,探讨了催化剂制备条件、原料配比、反应时间、催化剂用量等因素对富马酸二甲酯收率的影响.并采用HPLC,快速方便地检测富马酸二甲酯的收率,并考察由不同比例的甲醇/水、乙腈/水组成的流动相对分离的影响.试验证明,在最优条件下,富马酸二甲酯的产率可达到78.6%.     

NO分子A~2Σ←X~2Π跃迁的荧光激发

利用激光光谱技术得到NO分子在 2 1 0～ 2 36nm范围内的荧光发射谱 ,谱线峰值归属于A2 Σ←X2 Π(0 ,0 )、(0 ,1 )跃迁 ,根据谱线峰值位置 ,得到A2 Σ态的基振动频率和平衡位置的力常数。